It was already set to 6. I tried 7 with no difference. It had been
working fine with my Pioneer receiver up until this latest version. A
direct connection to the TV seems to work with my other setup.
On Tue, Jul 15, 2014 at 3:15 AM, VDR User <user....@gmail.com> wrote:
> >> New problem though, with 1080i atsc, I'm getting screen blanking every
> 20 seconds or so. It's fine with 480i with the deinterlacer enabled (as
> per the log). 720p also works fine with deinterlacer disabled. I can't
> find anything in the log files that might help with troubleshooting this
> > There's a HDMI boost option in config.txt you might want to try:
> > # Config HDMI Boost
> > # Configures the signal strength of the HDMI interface. Default is 0.
> Try 4 if
> > # you have interference issues (or blanking or no display) with hdmi.
> > config_hdmi_boost=4 #Set to change signal strength (0 - 7)
> What exactly is the purpose of that? A way to reduce power consumption
> by giving hdmi only enough signal/power it needs per your setup?
> vdr mailing list
vdr mailing list