>> New problem though, with 1080i atsc, I'm getting screen blanking every 20 
>> seconds or so.  It's fine with 480i with the deinterlacer enabled (as per 
>> the log).  720p also works fine with deinterlacer disabled.  I can't find 
>> anything in the log files that might help with troubleshooting this problem.
> There's a HDMI boost option in config.txt you might want to try:
> # Config HDMI Boost
> # Configures the signal strength of the HDMI interface. Default is 0. Try 4 if
> # you have interference issues (or blanking or no display) with hdmi.
> config_hdmi_boost=4   #Set to change signal strength (0 - 7)

What exactly is the purpose of that? A way to reduce power consumption
by giving hdmi only enough signal/power it needs per your setup?

vdr mailing list

Reply via email to