Eric, the fuel is strongly activated by its temperature.  How else would one 
explain the thermal run away processes that have been a problem with these 
systems forever?  If the outside temperature does not increase by adding more 
fuel to the chamber then you are assuming that no additional heat will be 
developed within the newly added material when it is subjected to the fixed 
temperature and current that initially exists.
 
So, what would you expect to happen if the fuel is reduced by a factor of 2 at 
that initial temperature?  Apparently you are speculating that the temperature 
remains the same.  And in the extreme case, what happens when you take out all 
of the fuel?  The bottom line is that some function must define the behavior as 
the fuel load is varied, hence the COP must vary along with that function.

The only example that I can believe which fits the sensibility test is that COP 
is going to change at least in a linear manner with increased fuel loading as 
long as the system geometry remains the same.  I am leaving out the interaction 
of positive thermal feedback which will likely enhance the COP as fuel is added 
to an initially constant temperature chamber to simplify the example.

Consider another problem with the concept that the current is the driving 
factor instead of temperature.  Why would the device require such high 
temperatures in order to generate energy?  It is not clear that the current 
itself is important except for the heat that is associated with that current 
flowing through the resistive windings.  In any case I would be extremely 
confused to find that the temperature of the device surface would not vary as 
the amount of fuel is changed.  No one has ever suggested this effect AFAIK 
unless of course that there is no LENR present.  But the assumption is a COP of 
1.5 at the beginning of the fuel adjustment phase.

Are you aware of any experiment that has demonstrated what you are proposing?  

Dave
 
 
-----Original Message-----
From: Eric Walker <[email protected]>
To: vortex-l <[email protected]>
Sent: Mon, Apr 11, 2016 9:13 pm
Subject: Re: [Vo]:Next Big Future - goes out on a limb




On Mon, Apr 11, 2016 at 12:01 PM, David Roberson <[email protected]> wrote:


Now, if you double the amount of fuel contained within the volume you can be 
quite certain that the outside temperature will increase, correct?



Not, it seems, to me, if the LENR activity is directly proportional to the 
current and not the amount of fuel, provided there's more than a minimally 
sufficient amount of fuel.


Eric




Reply via email to