Hi Wendy I'd just start it from scratch and set it up. I set them up manually when I've done it before, and just go through and put in all the settings I need. (Also, make sure the Time Capsule is using Bridge mode as well, as no doubt your Netgear will be handing out the IP addresses, and it always works best when just one unit is doing that part and not both.)
Hope that helps. Kind Regards Daniel On 14/2/09 9:05 PM, "Wendy S. Austin" <[email protected]> wrote: > Hi Daniel, thanks. I turned the Netgear and Time Capsule off and on > and also restarted the laptops, no good. > > I will have to try setting it up again. Do you suggest I 'Create > Network' ? > > Wendy > > > On 14/02/2009, at 4:11 PM, Daniel Kerr wrote: > >> Hi Wendy >> >> Normally if it's flashing amber it means it's not talking to the >> other modem >> to get the ADSL/internet connection. >> Sometimes, it's as simple as just turning the Airport unit off and >> back on >> again and it will correct itself. >> Other times, it's a matter of going through setting it up again to >> get it >> back talking to the other unit. >> >> Hope that helps. >> >> Kind Regards >> Daniel >> >> >> On 14/2/09 7:46 PM, "Wendy S. Austin" <[email protected]> wrote: >> >>> Hi James >>> >>> I have a look at the programmes you suggest. >>> >>> I haven't changed anything on the network other than telling the >>> MacBook to join it. I am now using an ethernet cable to the Netgear >>> to connect to the internet so that is all working okay, just the Time >>> Capsule that is flashing amber! >>> >>> Wendy >>> On 14/02/2009, at 3:41 PM, James / Hans Kunz wrote: >>> >>>> look for macstumbler or if still downloadable 'kismac trunk', both >>>> are progs that scan you "air" for wireless networks in the >>>> neighbourhood, make sure the wireless in the macbooks & netgear is >>>> activated !!! >>>> it then should show your time capsule & the other macbook (or maybe >>>> just the netgear modem) >>>> maybe you have an invisible character in the ssid, also spaces are >>>> not allowed..... is the wep or wpa security code correct? >>>> cheers James >>> >>> >>> -- The WA Macintosh User Group Mailing List -- >>> Archives - <http://www.wamug.org.au/mailinglist/archives.shtml> >>> Guidelines - <http://www.wamug.org.au/mailinglist/guidelines.shtml> >>> Unsubscribe - <mailto:[email protected]> >> >> --- >> Daniel Kerr >> MacWizardry >> >> Phone: 0414 795 960 >> Email: <daniel @ macwizardry . com . au> >> Web: <http://www.macwizardry.com.au> >> >> >> **For everything Macintosh** >> >> >> >> -- The WA Macintosh User Group Mailing List -- >> Archives - <http://www.wamug.org.au/mailinglist/archives.shtml> >> Guidelines - <http://www.wamug.org.au/mailinglist/guidelines.shtml> >> Unsubscribe - <mailto:[email protected]> > > > -- The WA Macintosh User Group Mailing List -- > Archives - <http://www.wamug.org.au/mailinglist/archives.shtml> > Guidelines - <http://www.wamug.org.au/mailinglist/guidelines.shtml> > Unsubscribe - <mailto:[email protected]> --- Daniel Kerr MacWizardry Phone: 0414 795 960 Email: <daniel @ macwizardry . com . au> Web: <http://www.macwizardry.com.au> **For everything Macintosh** -- The WA Macintosh User Group Mailing List -- Archives - <http://www.wamug.org.au/mailinglist/archives.shtml> Guidelines - <http://www.wamug.org.au/mailinglist/guidelines.shtml> Unsubscribe - <mailto:[email protected]>
