I know that motorola, and even radio shack used to make a small paging system.  You could use that too, and just ditch out on the monthly bill. 

 

Here is a motorola Alphamate 250, I do not know if you can connect to a phone or not.

 

http://cgi.ebay.com/Motorola-Alphamate-250-Pager-hub-Paging-keyboard-qwerty_W0QQitemZ8800988165QQcategoryZ51093QQrdZ1QQcmdZViewItem

 

Radio Shack:

 

http://cgi.ebay.com/Radio-Shack-Paging-System-and-11-pagers_W0QQitemZ9718515135QQcategoryZ3314QQrdZ1QQcmdZViewItem


> From: [EMAIL PROTECTED]
> To: wireless@wispa.org
> Subject: Re: [WISPA] FS: Remote Reboot
> Date: Thu, 27 Apr 2006 08:24:13 -0500
>
> The issue must be a format issue.  It appears that the Nighthawk
> system uses Pocsag, long the leader in paging formats.
>
> Some paging systems do not use Pocsag (Very few do not have
> the capabilty to use Pocsag, but there are some out there)
> and the Nighthawk would not appear to be compatable with
> a pure FLEX, two tone, or other format system.
>
> It would not take much to take a flex pager (Or whatever format
> that system uses) and have it trip a relay though, which could reset
> your system.  Tie a transistor to the LED, have it switch a relay.
>
> You could do that with any format, all you would need is a pager
> from the system, and a little thought.  Not as pretty as the nighthawk,
> but I bet it would work just as well.
>
>
> ----- Original Message ----- 
> From: "Gino A. Villarini" <[EMAIL PROTECTED]>
> To: "'WISPA General List'" <wireless@wispa.org>
> Sent: Thursday, April 27, 2006 7:34 AM
> Subject: RE: [WISPA] FS: Remote Reboot
>
>
> > Zip code? Huh, you just need a paging company with coverage in the area 
> > you
> > need service with.. We ordered our units without the paging service, go to
> > you local paging company and activate the units with them
> >
> >
> >
> > Gino A. Villarini
> > [EMAIL PROTECTED]
> > Aeronet Wireless Broadband Corp.
> > tel  787.273.4143   fax   787.273.4145
> >
> >  _____
> >
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
> > Behalf Of Tom DeReggi
> > Sent: Thursday, April 27, 2006 3:43 AM
> > To: WISPA General List
> > Subject: Re: [WISPA] FS: Remote Reboot
> >
> >
> >
> > Aren't those preprogramed from the factory for specific ZIP CODEs of
> > operation.
> >
> > Thats the reason we didn't go with them, we couldn't just buy a bunch of
> > them and use them, we had to predict in advance where we would use them.
> >
> >
> >
> > Tom DeReggi
> > RapidDSL & Wireless, Inc
> > IntAirNet- Fixed Wireless Broadband
>
>
> -- 
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/

-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to