I wouldn imagine using that to cover a 100
x 35 mile island… jeje We used to have 22 paging transmitter sites in VHF
157.740 to cover the island, most transmitting 400 -500 watts..and even then we
had dead spots!
Gino A. Villarini
[EMAIL PROTECTED]
Aeronet Wireless Broadband Corp.
tel 787.273.4143
fax 787.273.4145
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf
Of [EMAIL PROTECTED]
Sent: Thursday, April 27, 2006
12:09 PM
To: WISPA
General List
Subject: RE: Re: [WISPA] FS:
Remote Reboot
I
know that motorola, and even radio shack used to make a small paging
system. You could use that too, and just ditch out on the monthly
bill.
Here
is a motorola Alphamate 250, I do not know if you can connect to a phone or
not.
http://cgi.ebay.com/Motorola-Alphamate-250-Pager-hub-Paging-keyboard-qwerty_W0QQitemZ8800988165QQcategoryZ51093QQrdZ1QQcmdZViewItem
Radio
Shack:
http://cgi.ebay.com/Radio-Shack-Paging-System-and-11-pagers_W0QQitemZ9718515135QQcategoryZ3314QQrdZ1QQcmdZViewItem
>
From: [EMAIL PROTECTED]
> To: wireless@wispa.org
> Subject: Re: [WISPA] FS: Remote Reboot
> Date: Thu, 27 Apr 2006 08:24:13 -0500
>
>
The issue must be a format issue. It appears that the Nighthawk
> system uses Pocsag, long the leader in paging formats.
>
>
Some paging systems do not use Pocsag (Very few do not have
>
the capabilty to use Pocsag, but there are some out there)
>
and the Nighthawk would not appear to be compatable with
> a pure FLEX, two tone, or other format system.
>
>
It would not take much to take a flex pager (Or whatever format
>
that system uses) and have it trip a relay though, which could reset
>
your system. Tie a transistor to the LED, have it switch a relay.
>
> You could do that with any format, all you would need is a pager
>
from the system, and a little thought. Not as pretty as the nighthawk,
>
but I bet it would work just as well.
>
>
> ----- Original Message -----
>
From: "Gino A. Villarini" <[EMAIL PROTECTED]>
> To: "'WISPA General List'" <wireless@wispa.org>
> Sent: Thursday, April 27, 2006 7:34 AM
> Subject: RE: [WISPA] FS: Remote Reboot
>
>
>
> Zip code? Huh, you just need a paging company with coverage in the area
> > you
>
> need service with.. We ordered our units without the paging service, go to
>
> you local paging company and activate the units with them
> >
> >
> >
> > Gino A. Villarini
> > [EMAIL PROTECTED]
> > Aeronet Wireless Broadband Corp.
>
> tel 787.273.4143 fax 787.273.4145
> >
> > _____
> >
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
> > Behalf Of Tom DeReggi
>
> Sent: Thursday, April 27, 2006 3:43 AM
> > To: WISPA General List
> > Subject: Re: [WISPA] FS: Remote Reboot
> >
> >
> >
> > Aren't those preprogramed from the factory for specific ZIP CODEs of
> > operation.
> >
>
> Thats the reason we didn't go with them, we couldn't just buy a bunch of
>
> them and use them, we had to predict in advance where we would use them.
> >
> >
> >
> > Tom DeReggi
> > RapidDSL & Wireless, Inc
> > IntAirNet- Fixed Wireless Broadband
>
>
> --
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
