The Alphamate is strictly a input device, it has
no transmitter.

The Radio Schlouqe system is... Well, very short
range, and I believe (Althought I could be wrong
on this point) two tone, not the pocsag that the
Nighthawk requires.

----- Original Message ----- From: <[EMAIL PROTECTED]>
To: "WISPA General List" <wireless@wispa.org>
Sent: Thursday, April 27, 2006 11:08 AM
Subject: RE: Re: [WISPA] FS: Remote Reboot


I know that motorola, and even radio shack used to make a small paging system. You could use that too, and just ditch out on the monthly bill.

Here is a motorola Alphamate 250, I do not know if you can connect to a phone or not.

http://cgi.ebay.com/Motorola-Alphamate-250-Pager-hub-Paging-keyboard-qwerty_W0QQitemZ8800988165QQcategoryZ51093QQrdZ1QQcmdZViewItem

Radio Shack:

http://cgi.ebay.com/Radio-Shack-Paging-System-and-11-pagers_W0QQitemZ9718515135QQcategoryZ3314QQrdZ1QQcmdZViewItem



From: [EMAIL PROTECTED]> To: wireless@wispa.org> Subject: Re: [WISPA] FS: Remote Reboot> Date: Thu, 27 Apr 2006 08:24:13 -0500> > The issue must be a format issue. It appears that the Nighthawk> system uses Pocsag, long the leader in paging formats.> > Some paging systems do not use Pocsag (Very few do not have> the capabilty to use Pocsag, but there are some out there)> and the Nighthawk would not appear to be compatable with> a pure FLEX, two tone, or other format system.> > It would not take much to take a flex pager (Or whatever format> that system uses) and have it trip a relay though, which could reset> your system. Tie a transistor to the LED, have it switch a relay.> > You could do that with any format, all you would need is a pager> from the system, and a little thought. Not as pretty as the nighthawk,> but I bet it would work just as well.> > > ----- Original Message ----- > From: "Gino A. Villarini" <[EMAIL PROTECTED]>> To: "'WISPA General List'" <wireless@wispa.org>> Sent: Thursday, April 27, 2006 7:34 AM> Subject: RE: [WISPA] FS: Remote Reboot> > > > Zip code? Huh, you just need a paging company with coverage in the area > > you> > need service with.. We ordered our units without the paging service, go to> > you local paging company and activate the units with them> >> >> >> > Gino A. Villarini> > [EMAIL PROTECTED]> > Aeronet Wireless Broadband Corp.> > tel 787.273.4143 fax 787.273.4145> >> > _____> >> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On> > Behalf Of Tom DeReggi> > Sent: Thursday, April 27, 2006 3:43 AM> > To: WISPA General List> > Subject: Re: [WISPA] FS: Remote Reboot> >> >> >> > Aren't those preprogramed from the factory for specific ZIP CODEs of> > operation.> >> > Thats the reason we didn't go with them, we couldn't just buy a bunch of> > them and use them, we had to predict in advance where we would use them.> >> >> >> > Tom DeReggi> > RapidDSL & Wireless, Inc> > IntAirNet- Fixed Wireless Broadband> > > -- > WISPA Wireless List: wireless@wispa.org> > Subscribe/Unsubscribe:> http://lists.wispa.org/mailman/listinfo/wireless> > Archives: http://lists.wispa.org/pipermail/wireless/


--------------------------------------------------------------------------------


--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/



--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to