Also, we USED to have HUMONGOUS discrepancies in setting speed limits for 
customers before the traffic management was integrated with the billing system. 
 We use Powercode for this right now.

In the beginning, we speed limited people at each AP.  The biggest problem then 
was that people were not limited at all (this happened quite a bit), until I 
went in and mandated that every AP on our system was pre-populated with a 512k 
limit for every IP address on its subnet.  That did bring up the issue 
invevitably as people felt their connection was "slow".

That took a load off of our systems being out of sync with our billing at 
least, then it was mainly monitoring and keeping track of IP addresses & 
equipment types.

----- Original Message ----- 
  From: Josh Luthman 
  To: WISPA General List 
  Sent: Friday, November 05, 2010 2:45 PM
  Subject: Re: [WISPA] Systems Management - Process


  I can tell you how I solved these problems but it might start a big thread 
again...

  The key is to force the documentation, activity (monitoring,  cpe function) 
and billing in sync.  I've not seen multiple applications stay together by 
human hand.  Maybe it would work if someone's entire job was dedicated to it.

  On Nov 5, 2010 5:36 PM, "Mark Nash" <[email protected]> wrote:



------------------------------------------------------------------------------




  
--------------------------------------------------------------------------------
  WISPA Wants You! Join today!
  http://signup.wispa.org/
  
--------------------------------------------------------------------------------
   
  WISPA Wireless List: [email protected]

  Subscribe/Unsubscribe:
  http://lists.wispa.org/mailman/listinfo/wireless

  Archives: http://lists.wispa.org/pipermail/wireless/

--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: [email protected]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to