Hi Bill, When using /dev/cu.SLAB_USBtoUART1 The error details shows: HamLib Error: Invalid configuration while opening connection to rig.
When using /dev/cu.SLAB_USBtoUART The error details shows: HamLib Error: Communication timed out while getting current frequency. Both selections end up with a RED Test Cat. Thanks! On Sat, May 23, 2020 at 4:08 PM Bill Somerville <g4...@classdesign.com> wrote: > On 23/05/2020 23:59, Bill wrote: > > Hi, > > > > Thanks for the quick response. I just tried HandShake = NONE and I > > have the same result - Rig Failure - HamLib Error. > > > > Any other suggestions? > > > > Thanks! > > > > Bill - AK6A > > Hi Bill, > > please include the message shown by pressing the "Show Details ..." > button when you get a Hamlib error. > > Have you tried using the other serial port /dev/cu.SLAB_USBtoUART ? If > not then try it with and without Hardware handshaking. > > 73 > Bill > G4WJS. > > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
