Hi Tom If its a bug, its not present with all setups, as it works for me fine, and always has. Operating systems Win7 and 10, but a different radio to yours.
Did you remember to press OK to close the Frequencies window? Else it doesn't store the new offset you have entered. 73 Charlie DL3WDG On Tue, 18 Jul 2023 at 12:52, tom via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > Hi - posted on main list but no final solution. > > Windows 11, wsjt-X 2.6.2 and 2.7.0-rc2 > > Setting up a 23cms Transverter with a 28 MHz IF - seems to be an issue. > Used an offset -1268 and wsjt-x displayed 23cms ok but cat jumped rig to > 1.065 MHz. > > > Tried the example given on archive for 2m offset -116 and all worked fine, > cat kicked in and rig (TS680) switched to 28 Mhz and WSJT-X displayed 144 > MHz. > > Could it be the , in offset freq -1268 is entered and software formats it > to -1,268.000 000 MHz. > > Tried the same setup with MSHV and WSJT-X-Improved and worked as expected > with -1268 offset. Cat and freq both ok. > > Thanks in advance for any suggestions but it does look like a bug rather > than user error. > > Tom GM8MJV > t...@tkrh.co.uk > > > > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
