Thanks all. Yes I was following all comments - I have no issue at all with 2m or 70cms offsets - same version of Windows, same rig (TS680) same copy of WSJT. Yes saving all settings with the OK.
Yes was entering -1268 as offset - one thing - could someone confirm the format of the offset on your working system. Here it is -1,268.000 000 Mhz - note the comma as the separator on 1,268 Harry your example had no comma. Could it be the locale I have set to UK ? Thanks Tom Tom GM8MJV t...@tkrh.co.uk > On 18 Jul 2023, at 17:37, Harry E. Hoffman via wsjt-devel > <wsjt-devel@lists.sourceforge.net> wrote: > > Hi Tom, > > Appending my post: > > The offset frequency is a negative number so it should read: > > Band = 23 cm > Offset = -1268.000 000 (note the decimal point and the space) > > I am using an IC-7300 as the IF radio on my system and my transverter > settings for 1.25 meters and 33 centimeters work fine. I don't use a > transverter for 23 centimeters as I also have an IC-9700. > > 73 Harry (KA2ENE) > > ----------------------------------- > > On 7/18/2023 10:18 AM, Harry E. Hoffman via wsjt-devel wrote: >> Hi Tom, >> I use transverters for 1.25 meters and 33 centimeters, using the the same >> idea try this for 23 centimeters. >> Band = 23 cm >> Offset = 1268.000 000 (note the decimal point and the space) >> Check the frequency list and if there are no entries for 23 cm add them for >> the modes you want. >> Example: Region 2 FT8 1296.174 000 >> good luck. >> 73 Harry (KA2ENE) >> ----------------------------------- >> On 7/18/2023 6:30 AM, tom via wsjt-devel wrote: >>> Hi - posted on main list but no final solution. >>> >>> Windows 11, wsjt-X 2.6.2 and 2.7.0-rc2 >>> >>> Setting up a 23cms Transverter with a 28 MHz IF - seems to be an issue. >>> Used an offset -1268 and wsjt-x displayed 23cms ok but cat jumped rig to >>> 1.065 MHz. >>> >>> >>> Tried the example given on archive for 2m offset -116 and all worked fine, >>> cat kicked in and rig (TS680) switched to 28 Mhz and WSJT-X displayed 144 >>> MHz. >>> >>> Could it be the , in offset freq -1268 is entered and software formats it >>> to -1,268.000 000 MHz. >>> >>> Tried the same setup with MSHV and WSJT-X-Improved and worked as expected >>> with -1268 offset. Cat and freq both ok. >>> >>> Thanks in advance for any suggestions but it does look like a bug rather >>> than user error. >>> >>> Tom GM8MJV >>> t...@tkrh.co.uk <mailto:t...@tkrh.co.uk> >>> >>> >>> >>> >>> >>> >>> >>> _______________________________________________ >>> wsjt-devel mailing list >>> wsjt-devel@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> _______________________________________________ >> wsjt-devel mailing list >> wsjt-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
