Tom,
I use a transverter as well. Do make sure you have entered the frequency you
are using in the 'Frequencies' list in 'Settings'. Without doing that, the
rig's frequency can/will jump elsewhere.
Good luck and 73,
Andy, ka2uqw
On Tuesday, July 18, 2023 at 06:51:28 AM EDT, tom via wsjt-devel
<wsjt-devel@lists.sourceforge.net> wrote:
Hi - posted on main list but no final solution.
Windows 11, wsjt-X 2.6.2 and 2.7.0-rc2
Setting up a 23cms Transverter with a 28 MHz IF - seems to be an issue. Used an
offset -1268 and wsjt-x displayed 23cms ok but cat jumped rig to 1.065 MHz.
Tried the example given on archive for 2m offset -116 and all worked fine, cat
kicked in and rig (TS680) switched to 28 Mhz and WSJT-X displayed 144 MHz.
Could it be the , in offset freq -1268 is entered and software formats it to
-1,268.000 000 MHz.
Tried the same setup with MSHV and WSJT-X-Improved and worked as expected with
-1268 offset. Cat and freq both ok.
Thanks in advance for any suggestions but it does look like a bug rather than
user error.
Tom GM8MJV
t...@tkrh.co.uk
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
