Hi Tom,
I use transverters for 1.25 meters and 33 centimeters, using the the
same idea try this for 23 centimeters.
Band = 23 cm
Offset = 1268.000 000 (note the decimal point and the space)
Check the frequency list and if there are no entries for 23 cm add them
for the modes you want.
Example: Region 2 FT8 1296.174 000
good luck.
73 Harry (KA2ENE)
-----------------------------------
On 7/18/2023 6:30 AM, tom via wsjt-devel wrote:
Hi - posted on main list but no final solution.
Windows 11, wsjt-X 2.6.2 and 2.7.0-rc2
Setting up a 23cms Transverter with a 28 MHz IF - seems to be an issue.
Used an offset -1268 and wsjt-x displayed 23cms ok but cat jumped rig to
1.065 MHz.
Tried the example given on archive for 2m offset -116 and all worked
fine, cat kicked in and rig (TS680) switched to 28 Mhz and WSJT-X
displayed 144 MHz.
Could it be the , in offset freq -1268 is entered and software formats
it to -1,268.000 000 MHz.
Tried the same setup with MSHV and WSJT-X-Improved and worked as
expected with -1268 offset. Cat and freq both ok.
Thanks in advance for any suggestions but it does look like a bug rather
than user error.
Tom GM8MJV
t...@tkrh.co.uk <mailto:t...@tkrh.co.uk>
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
