That's what you get when you start smooshing buttons. Here's what happened. You swap VFOs -- WSJT-X doesn't care.You exit -- WSJT-X saves the VFOB frequency as the "last frequency" used.You start again -- if you have "Monitor returns to last used frequency" it will then load VFOB's frequency into VFOA.Of course rig split will set VFOB based on VFOA's frequency. So... #1 Don't smoosh buttons unless you know what you are doing#2 Turn off "Monitor returns...." Mike W9MDB
On Thursday, July 20, 2023 at 01:38:29 AM CDT, Glenn Williams via wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote: Hello, Comment: The following Human Induced confusion of VFO frequency occurs on FT8 shutdown. Not necessarily a "bug" in WSJT-X. Just thought I would send out the information. Setup: Windows 10, Kenwood TS590SG, USB cable driven, both WSJT-X 2.6.1 and 2.7.0-rc2. Bands: at least on HF bands. Everything going well as usual. TX frequency high enough to separate VFO A and VFO B by 1.000 kHz (RIG SPLIT) in this example. Action creating problem: Human manually toggles VFO A/B button. Now VFO B is in the main position, VFO A on the side, no frequency changes have occurred in either VFO. Next steps: EXIT out of WSJT-X. Restart WSJT-X. Now VFO A displays what VFO B was displaying. VFO B is still 1 kHz higher, which is now 2 kHz from the original. Examples follow. TX = 2800 Hz PC rig rig FT8 Display VFO A VFO B 24915.00 24915.00 24916.00 <-A on main, B on side. Not in QSO. Toggle A/B on rig. 24916.00 24915.00 24916.00 <-B on main, A on side. Not in QSO. EXIT and restart. Symptoms begin. 24916.00 24916.00 24917.00 <-A on main, B on side. Not in QSO. This effect also might happen on other CAT-based rigs? Problem with hamlib? --73, Glenn, AF8C -- This email has been checked for viruses by Avast antivirus software. www.avast.com _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel