Henrik Hjelte-2 wrote:
>
> I am trying to get my Linksys USB Network Adapter with Wi-Fi finder
> Linksys WUSBF54G 13b1:0024 to work with zd1211rw. Previously I've had
> success version getting it to work with the old zd1211 driver.
> I'm running Ubuntu feisty, which has kernel 2.6.19-7.
> zd1211rw is snapshot 2006-12-14, with an edited zd_usb.c with a new
> {USB_DEVICE(0x13b1, 0x0024), .driver_info = DEVICE_ZD1211B}
>
> I seem to get the usb adapter recognized, but the Bit Rate is only 1
> Mb/s and I can't get an dhcp offer. I tried to set another bit rate with
> iwconfig (sudo iwconfig eth1 rate 11M), but it doesn't change. The
> output of iwconfig looks the same next time.
>
> Any ideas how I can get further or what I'm doing wrong?
> /Henrik Hjelte
>
> dmesg:
>
> [ 1047.992000] usb 3-3: new high speed USB device
> using ehci_hcd and address 8
> [ 1048.124000] usb 3-3: configuration #1 chosen from 1
> choice
> [ 1048.156000] usb 3-3: firmware version 0x4810 and
> device bootcode version 0x4802 differ
> [ 1048.264000] zd1211rw 3-3:1.0: firmware version 4725
> [ 1048.308000] zd1211rw 3-3:1.0: zd1211b chip 13b1:0024 v4802
> high00-14-bf AL2230_RF pa0 ----
> [ 1048.308000] zd1211rw 3-3:1.0: eth1
> [ 1048.432000] ADDRCONF(NETDEV_UP): eth1: link is not
> ready
>
>
> iwconfig:
>
> eth1 IEEE 802.11b/g ESSID:"O" Nickname:"zd1211"
> Mode:Managed Frequency:2.412 GHz Access
> Point: Invalid
> Bit Rate=1 Mb/s
> Link Quality:0 Signal level:0 Noise
> level:0
> Rx invalid nwid:0 Rx invalid crypt:0 Rx
> invalid frag:0
> Tx excessive retries:0 Invalid misc:0
> Missed beacon:0
>
>
>
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share
> your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Zd1211-devs mailing list - http://zd1211.ath.cx/
> Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs
>
>
I have the same problem...............
--
View this message in context:
http://www.nabble.com/zd1211rw-problems%2C-bit-rate%2C-icwonfig-tf2829350.html#a7900561
Sent from the zd1211-devs mailing list archive at Nabble.com.
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Zd1211-devs mailing list - http://zd1211.ath.cx/
Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs
