On 04/05/2017 08:14 AM, Daniel Frey wrote: > On 04/04/2017 03:11 PM, Kai Krakow wrote: >> >> That's a good note. >> >> I think punch down is similar to LSA plus here in Germany, tho the >> tools look very different. But with LSA you also push the wire between >> to cutting contacts. >> > > Yeah, it sounds like it works the same here: a wire is pushed through a > V-bladed contact via a tool. > > Dan
The problem with the cable was incorrect cross-over, the cable was installed by a contractor few years back and terminated by them. When I initially tested the cable with cable tester one end was connected to a switch I connected the tester to another and all the lights were working in order. Wrong assumption. The switch will respond to any ping and give a false readout. I suppose to connect one end to transmitter and the other end to the receiver (that came with it) and I've noticed incorrect order. >From Left: Orange/White Orange Blue/Stripe Blue Green/Stripe Green Brown/Strip Brown Re-termination fixed the problem. -- Thelma