Hi,
I get nothing but static on both tuners. I'm running FC4, and ivtv 3.6 from atrpms testing. I tried replacing the firmware to the one on the Happaugge cd, as per the instructions here: http://ivtv.writeme.ch/tiki-index.php?page=PVR150-500Firmware. Also, I don't know if this is related, but ivtv doesn't automatically start on bootup. I haveto do "modpobe ivtv". Here's my modprobe.conf: alias eth0 sk98lin alias scsi_hostadapter sata_sil # nForce sound configuration alias snd-card-0 snd-intel8x0 options snd-card-0 index=0 options snd-intel8x0 index=0 install snd-intel8x0 /sbin/modprobe --ignore-install snd-intel8x0 && /usr/sbin/a lsactl restore >/dev/null 2>&1 || : remove snd-intel8x0 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; }; /sbin/m odprobe -r --ignore-remove snd-intel8x0 # end nForce sound configuration alias usb-controller ehci-hcd alias usb-controller1 ohci-hcd alias ieee1394-controller ohci1394 alias scsi_hostadapter1 sata_nv # nvidia kernel module alias char-major-195 nvidia-1_0-7667 alias nvidia nvidia-1_0-7667 # ivtv (PVR-500MCE) alias char-major-81 videodev alias char-major-81-0 ivtv alias char-major-81-1 ivtv alias tveeprom tveeprom-ivtv alias tuner tuner-ivtv alias msp3400 msp3400-ivtv options cx25840 no_black_magic=1 And here's the dmesg output: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.6 (w) loading ivtv: Linux version: 2.6.12-1.1398_FC4 686 REGPARM 4KSTACKS gcc-4.0 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNK2] -> GSI 5 (level, low) -> IRQ 5 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: XXX PCI device: 0x01e0 vendor: 0x10de ivtv: i2c attach [client=eeprom,ok] ivtv: i2c client addr: 0x50 not found for command 0x0! ivtv: Error -19 reading Hauppauge eeprom. ivtv: Possible causes: the tveeprom module was not loaded, or ivtv: the eeprom kernel module was loaded before the tveeprom module. tuner: Ignoring new-style parameters in presence of obsolete ones tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] cx25840: Unknown parameter `no_black_magic' cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) cx25840: detecting cx25840 client on address 0x88 cx25840: cx25843-23 found. Initializing... cx25840: requesting /lib/modules/HcwMakoA.ROM cx25840: firmware loaded ivtv: i2c attach [client=cx25840[50],ok] ivtv: i2c attach [client=wm8775[50],ok] tda9885/6/7: chip found @ 0x86 ivtv: i2c attach [client=tda9887,ok] ivtv: Could not detect tuner standard, defaulting to NTSC. ivtv: Encoder revision: 0x02050032 ivtv: Encoder Firmware may be buggy, use version 0x02040011 ivtv: Configuring WinTV PVR 150 card with 4 streams ivtv: Registered v4l2 device for encoder MPEG minor 0 ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) ivtv: Registered v4l2 device for encoder YUV minor 32 ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total) ivtv: Registered v4l2 device for encoder VBI minor 224 ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total) ivtv: Registered v4l2 device for encoder PCM audio minor 24 ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) cx25840: decoder set norm NTSC tuner: tuner type not set cx25840: decoder set input (6) cx25840: now setting Tuner input cx25840: set audio input (0) ivtv: Switching standard to NTSC. tuner: tuner type not set cx25840: decoder set norm NTSC ivtv: Initialized WinTV PVR 150, card #0 ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ivtv: ivtv_enc_thread: pid = 3234, itv = 0xfa724320 ivtv: ivtv_enc_vbi_thread: pid = 3235, itv = 0xfa724320 ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNK3] -> GSI 11 (level, low) -> IRQ 11 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: XXX PCI device: 0x01e0 vendor: 0x10de ivtv: i2c attach [client=eeprom,ok] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 ivtv: i2c attach [client=(tuner unset),ok] cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005) cx25840: detecting cx25840 client on address 0x88 cx25840: cx25843-23 found. Initializing... cx25840: requesting /lib/modules/HcwMakoA.ROM cx25840: firmware loaded ivtv: i2c attach [client=cx25840[50],ok] ivtv: i2c attach [client=wm8775[50],ok] tda9885/6/7: chip found @ 0x86 ivtv: i2c attach [client=tda9887,ok] ivtv: i2c client addr: 0x50 not found for command 0x0! ivtv: Error -19 reading Hauppauge eeprom. ivtv: Possible causes: the tveeprom module was not loaded, or ivtv: the eeprom kernel module was loaded before the tveeprom module. ivtv: Encoder revision: 0x02050032 ivtv: Encoder Firmware may be buggy, use version 0x02040011 ivtv: Configuring WinTV PVR 150 card with 4 streams ivtv: Registered v4l2 device for encoder MPEG minor 1 ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) ivtv: Registered v4l2 device for encoder YUV minor 33 ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total) ivtv: Registered v4l2 device for encoder VBI minor 225 ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total) ivtv: Registered v4l2 device for encoder PCM audio minor 25 ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) cx25840: decoder set norm NTSC tuner: tuner type not set cx25840: decoder set input (6) cx25840: now setting Tuner input cx25840: set audio input (0) ivtv: Switching standard to NTSC. tuner: tuner type not set cx25840: decoder set norm NTSC ivtv: Initialized WinTV PVR 150, card #1 ivtv: ==================== END INIT IVTV ==================== Any help would be greatly appreciated. Thanks. ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id492&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
