Thanks. I removed eeprom.ko, and I got video on both tuners. However, now I get no audio on tuner 0. Audio on tuner 1 works fine. Any ideas?
Here's my dmesg output: Jul 24 19:29:04 localhost kernel: ivtv: ==================== START INIT IVTV ==================== Jul 24 19:29:04 localhost kernel: ivtv: version 0.3.6 (w) loading Jul 24 19:29:04 localhost kernel: ivtv: Linux version: 2.6.12-1.1398_FC4 686 REGPARM 4KSTACKS gcc-4.0 Jul 24 19:29:04 localhost kernel: ivtv: In case of problems please include the debug info Jul 24 19:29:04 localhost kernel: ivtv: between the START INIT IVTV and END INIT IVTV lines when Jul 24 19:29:04 localhost kernel: ivtv: mailing the ivtv-devel mailinglist. Jul 24 19:29:04 localhost kernel: ivtv: Autodetected WinTV PVR 150 card Jul 24 19:29:04 localhost kernel: ivtv: Found an iTVC16 based chip Jul 24 19:29:04 localhost kernel: ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNK2] -> GSI 5 (level, low) -> IRQ 5 Jul 24 19:29:04 localhost kernel: ivtv: XXX PCI device: 0x01e0 vendor: 0x10de Jul 24 19:29:05 localhost kernel: cx25840: requesting /lib/modules/HcwMakoA.ROM Jul 24 19:29:06 localhost kernel: cx25840: firmware loaded Jul 24 19:29:06 localhost kernel: ivtv: i2c attach [client=cx25840[50],ok] Jul 24 19:29:06 localhost kernel: ivtv: i2c attach [client=wm8775[50],ok] Jul 24 19:29:06 localhost kernel: tda9885/6/7: chip found @ 0x86 Jul 24 19:29:06 localhost kernel: ivtv: i2c attach [client=tda9887,ok] Jul 24 19:29:06 localhost kernel: tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 8023678 Jul 24 19:29:06 localhost kernel: tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57) Jul 24 19:29:06 localhost kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) Jul 24 19:29:06 localhost kernel: tveeprom: audio_processor = MSP3410D (type = 5) Jul 24 19:29:06 localhost kernel: ivtv: i2c attach [client=tveeprom[50],ok] Jul 24 19:29:06 localhost kernel: ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model 0x00914652, Revision 0x00000000 Jul 24 19:29:06 localhost kernel: ivtv: NTSC tuner detected Jul 24 19:29:06 localhost kernel: ivtv: Radio detected Jul 24 19:29:06 localhost kernel: tuner: Ignoring new-style parameters in presence of obsolete ones Jul 24 19:29:06 localhost kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 Jul 24 19:29:06 localhost kernel: ivtv: i2c attach [client=(tuner unset),ok] Jul 24 19:29:07 localhost kernel: ivtv: Encoder revision: 0x02050032 Jul 24 19:29:07 localhost kernel: ivtv: Encoder Firmware may be buggy, use version 0x02040011 Jul 24 19:29:07 localhost kernel: ivtv: Configuring WinTV PVR 150 card with 5 streams Jul 24 19:29:07 localhost kernel: ivtv: Registered v4l2 device for encoder MPEG minor 0 Jul 24 19:29:07 localhost kernel: ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) Jul 24 19:29:07 localhost kernel: ivtv: Registered v4l2 device for encoder YUV minor 32 Jul 24 19:29:07 localhost kernel: ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total) Jul 24 19:29:07 localhost kernel: ivtv: Registered v4l2 device for encoder VBI minor 224 Jul 24 19:29:07 localhost kernel: ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total) Jul 24 19:29:07 localhost kernel: ivtv: Registered v4l2 device for encoder PCM audio minor 24 Jul 24 19:29:07 localhost kernel: ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) Jul 24 19:29:07 localhost kernel: ivtv: Registered v4l2 device for encoder radio minor 64 Jul 24 19:29:07 localhost kernel: ivtv: Create encoder radio stream Jul 24 19:29:07 localhost kernel: ivtv: Setting Tuner 57 Jul 24 19:29:07 localhost kernel: tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #0 Jul 24 19:29:07 localhost kernel: ivtv: Switching standard to NTSC. Jul 24 19:29:07 localhost kernel: ivtv: Initialized WinTV PVR 150, card #0 Jul 24 19:29:07 localhost kernel: ivtv: Autodetected WinTV PVR 150 card Jul 24 19:29:07 localhost kernel: ivtv: Found an iTVC16 based chip Jul 24 19:29:07 localhost kernel: ivtv: ivtv_enc_thread: pid = 4699, itv = 0xfa724320 Jul 24 19:29:07 localhost kernel: ivtv: ivtv_enc_vbi_thread: pid = 4700, itv = 0xfa724320 Jul 24 19:29:07 localhost kernel: ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNK3] -> GSI 11 (level, low) -> IRQ 11 Jul 24 19:29:07 localhost kernel: ivtv: XXX PCI device: 0x01e0 vendor: 0x10de Jul 24 19:29:07 localhost kernel: cx25840: requesting /lib/modules/HcwMakoA.ROM Jul 24 19:29:08 localhost kernel: cx25840: firmware loaded Jul 24 19:29:08 localhost kernel: ivtv: i2c attach [client=cx25840[50],ok] Jul 24 19:29:08 localhost kernel: ivtv: i2c attach [client=wm8775[50],ok] Jul 24 19:29:08 localhost kernel: tda9885/6/7: chip found @ 0x86 Jul 24 19:29:08 localhost kernel: ivtv: i2c attach [client=tda9887,ok] Jul 24 19:29:09 localhost kernel: tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 8023678 Jul 24 19:29:09 localhost kernel: tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57) Jul 24 19:29:09 localhost kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) Jul 24 19:29:09 localhost kernel: tveeprom: audio_processor = MSP3410D (type = 5) Jul 24 19:29:09 localhost kernel: ivtv: i2c attach [client=tveeprom[50],ok] Jul 24 19:29:09 localhost kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 Jul 24 19:29:09 localhost kernel: ivtv: i2c attach [client=(tuner unset),ok] Jul 24 19:29:09 localhost kernel: ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model 0x00914652, Revision 0x00000000 Jul 24 19:29:09 localhost kernel: ivtv: Radio detected Jul 24 19:29:09 localhost kernel: ivtv: Encoder revision: 0x02050032 Jul 24 19:29:09 localhost kernel: ivtv: Encoder Firmware may be buggy, use version 0x02040011 Jul 24 19:29:09 localhost kernel: ivtv: Configuring WinTV PVR 150 card with 5 streams Jul 24 19:29:09 localhost kernel: ivtv: Registered v4l2 device for encoder MPEG minor 1 Jul 24 19:29:09 localhost kernel: ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) Jul 24 19:29:09 localhost kernel: ivtv: Registered v4l2 device for encoder YUV minor 33 Jul 24 19:29:09 localhost kernel: ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total) Jul 24 19:29:09 localhost kernel: ivtv: Registered v4l2 device for encoder VBI minor 225 Jul 24 19:29:09 localhost kernel: ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total) Jul 24 19:29:09 localhost kernel: ivtv: Registered v4l2 device for encoder PCM audio minor 25 Jul 24 19:29:09 localhost kernel: ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) Jul 24 19:29:10 localhost kernel: ivtv: Registered v4l2 device for encoder radio minor 65 Jul 24 19:29:10 localhost kernel: ivtv: Create encoder radio stream Jul 24 19:29:10 localhost kernel: ivtv: Setting Tuner 57 Jul 24 19:29:10 localhost kernel: tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #1 Jul 24 19:29:10 localhost kernel: ivtv: Switching standard to NTSC. Jul 24 19:29:10 localhost kernel: ivtv: Initialized WinTV PVR 150, card #1 Jul 24 19:29:10 localhost kernel: ivtv: ==================== END INIT IVTV ==================== On 7/24/05, Bryan Mayland <[EMAIL PROTECTED]> wrote: > Ross wrote: > > >>ivtv: i2c attach [client=eeprom,ok] > >>ivtv: i2c client addr: 0x50 not found for command 0x0! > >>ivtv: Error -19 reading Hauppauge eeprom. > >>ivtv: Possible causes: the tveeprom module was not loaded, or > >>ivtv: the eeprom kernel module was loaded before the tveeprom module. > >> > >> > > > >The tveeprom module should attach here, not eeprom. Are you using the > >eeprom module for anything else? Can you remove the eeprom.ko file > >(which will be under somewhere under /lib/modules/`uname -r`/), rerun > >'depmod -a', rmmod the modules, and retry? > > > > > Ross is right. This is your problem right here (and down below > where it says tuner type not set). If you need the eeprom module, > you'll have to manually configure the ivtv modules. rmmod the following > modules: > eeprom > tveeprom > ivtv > cx25840 > wm8775 > tuner > > Check to make sure that eeprom is not still loaded by checking `lsmod` > Then do a modprobe ivtv. > > >>cx25840: Unknown parameter `no_black_magic' > >> > >> > > > >This is another problem (although unrelated), remove the > >no_black_magic option in /etc/modprobe.conf. > > > > > Yeah the quickstart documentation needs an update. I've looked at > it but it overwhelms me :) > > > ------------------------------------------------------- > SF.Net email is sponsored by: Discover Easy Linux Migration Strategies > from IBM. Find simple to follow Roadmaps, straightforward articles, > informative Webcasts and more! Get everything you need to get up to > speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click > _______________________________________________ > ivtv-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id492&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
