You should look for multiple copies of the tuner and tuner-ivtv modules. IIRC correctly, the one you want is just tuner.ko, and should have a recent modification date. Might also want to remove the alias tuner tuner-ivtv line as well.
Similar recommendations for the other ivtv specific modules (e.g. tveeprom, msp3400, etc.) -brendan On Sun, 24 Jul 2005, Edward Rosinzonsky wrote: > Hi, > > > > I get nothing but static on both tuners. I'm running FC4, and ivtv > 3.6 from atrpms testing. I tried replacing the firmware to the one on > the Happaugge cd, as per the instructions here: > http://ivtv.writeme.ch/tiki-index.php?page=PVR150-500Firmware. Also, > I don't know if this is related, but ivtv doesn't automatically start > on bootup. I haveto do "modpobe ivtv". > > > > Here's my modprobe.conf: > > alias eth0 sk98lin > > alias scsi_hostadapter sata_sil > > # nForce sound configuration > > alias snd-card-0 snd-intel8x0 > > options snd-card-0 index=0 > > options snd-intel8x0 index=0 > > install snd-intel8x0 /sbin/modprobe --ignore-install snd-intel8x0 && > /usr/sbin/a > > lsactl restore >/dev/null 2>&1 || : > > remove snd-intel8x0 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; }; > /sbin/m > > odprobe -r --ignore-remove snd-intel8x0 > > # end nForce sound configuration > > alias usb-controller ehci-hcd > > alias usb-controller1 ohci-hcd > > alias ieee1394-controller ohci1394 > > alias scsi_hostadapter1 sata_nv > > # nvidia kernel module > > alias char-major-195 nvidia-1_0-7667 > > alias nvidia nvidia-1_0-7667 > > # ivtv (PVR-500MCE) > > alias char-major-81 videodev > > alias char-major-81-0 ivtv > > alias char-major-81-1 ivtv > > alias tveeprom tveeprom-ivtv > > alias tuner tuner-ivtv > > alias msp3400 msp3400-ivtv > > options cx25840 no_black_magic=1 > > > > And here's the dmesg output: > > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.3.6 (w) loading > ivtv: Linux version: 2.6.12-1.1398_FC4 686 REGPARM 4KSTACKS gcc-4.0 > ivtv: In case of problems please include the debug info > ivtv: between the START INIT IVTV and END INIT IVTV lines when > ivtv: mailing the ivtv-devel mailinglist. > ivtv: Autodetected WinTV PVR 150 card > ivtv: Found an iTVC16 based chip > ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNK2] -> GSI 5 (level, > low) -> IRQ 5 > ivtv: Unreasonably low latency timer, setting to 64 (was 32) > ivtv: XXX PCI device: 0x01e0 vendor: 0x10de > ivtv: i2c attach [client=eeprom,ok] > ivtv: i2c client addr: 0x50 not found for command 0x0! > ivtv: Error -19 reading Hauppauge eeprom. > ivtv: Possible causes: the tveeprom module was not loaded, or > ivtv: the eeprom kernel module was loaded before the tveeprom module. > tuner: Ignoring new-style parameters in presence of obsolete ones > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 > ivtv: i2c attach [client=(tuner unset),ok] > cx25840: Unknown parameter `no_black_magic' > cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) > cx25840: detecting cx25840 client on address 0x88 > cx25840: cx25843-23 found. Initializing... > cx25840: requesting /lib/modules/HcwMakoA.ROM > cx25840: firmware loaded > ivtv: i2c attach [client=cx25840[50],ok] > ivtv: i2c attach [client=wm8775[50],ok] > tda9885/6/7: chip found @ 0x86 > ivtv: i2c attach [client=tda9887,ok] > ivtv: Could not detect tuner standard, defaulting to NTSC. > ivtv: Encoder revision: 0x02050032 > ivtv: Encoder Firmware may be buggy, use version 0x02040011 > ivtv: Configuring WinTV PVR 150 card with 4 streams > ivtv: Registered v4l2 device for encoder MPEG minor 0 > ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) > ivtv: Registered v4l2 device for encoder YUV minor 32 > ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total) > ivtv: Registered v4l2 device for encoder VBI minor 224 > ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total) > ivtv: Registered v4l2 device for encoder PCM audio minor 24 > ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) > cx25840: decoder set norm NTSC > tuner: tuner type not set > cx25840: decoder set input (6) > cx25840: now setting Tuner input > cx25840: set audio input (0) > ivtv: Switching standard to NTSC. > tuner: tuner type not set > cx25840: decoder set norm NTSC > ivtv: Initialized WinTV PVR 150, card #0 > ivtv: Autodetected WinTV PVR 150 card > ivtv: Found an iTVC16 based chip > ivtv: ivtv_enc_thread: pid = 3234, itv = 0xfa724320 > ivtv: ivtv_enc_vbi_thread: pid = 3235, itv = 0xfa724320 > ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNK3] -> GSI 11 (level, > low) -> IRQ 11 > ivtv: Unreasonably low latency timer, setting to 64 (was 32) > ivtv: XXX PCI device: 0x01e0 vendor: 0x10de > ivtv: i2c attach [client=eeprom,ok] > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 > ivtv: i2c attach [client=(tuner unset),ok] > cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005) > cx25840: detecting cx25840 client on address 0x88 > cx25840: cx25843-23 found. Initializing... > cx25840: requesting /lib/modules/HcwMakoA.ROM > cx25840: firmware loaded > ivtv: i2c attach [client=cx25840[50],ok] > ivtv: i2c attach [client=wm8775[50],ok] > tda9885/6/7: chip found @ 0x86 > ivtv: i2c attach [client=tda9887,ok] > ivtv: i2c client addr: 0x50 not found for command 0x0! > ivtv: Error -19 reading Hauppauge eeprom. > ivtv: Possible causes: the tveeprom module was not loaded, or > ivtv: the eeprom kernel module was loaded before the tveeprom module. > ivtv: Encoder revision: 0x02050032 > ivtv: Encoder Firmware may be buggy, use version 0x02040011 > ivtv: Configuring WinTV PVR 150 card with 4 streams > ivtv: Registered v4l2 device for encoder MPEG minor 1 > ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) > ivtv: Registered v4l2 device for encoder YUV minor 33 > ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total) > ivtv: Registered v4l2 device for encoder VBI minor 225 > ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total) > ivtv: Registered v4l2 device for encoder PCM audio minor 25 > ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) > cx25840: decoder set norm NTSC > tuner: tuner type not set > cx25840: decoder set input (6) > cx25840: now setting Tuner input > cx25840: set audio input (0) > ivtv: Switching standard to NTSC. > tuner: tuner type not set > cx25840: decoder set norm NTSC > ivtv: Initialized WinTV PVR 150, card #1 > ivtv: ==================== END INIT IVTV ==================== > > > > > Any help would be greatly appreciated. > > Thanks. > > > ------------------------------------------------------- > SF.Net email is sponsored by: Discover Easy Linux Mi ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
