[Ganglia-general] Ganglia installation
Hi, I am new bie and would like to know the steps to install monitor? -- Regards, Anand.M 404-915-0540 -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://pubads.g.doubleclick.net/gampad/clk?id=154624111iu=/4140/ostg.clktrk___ Ganglia-general mailing list Ganglia-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ganglia-general
[Ganglia-general] Ganglia Installation
Does anybody know of good sources of Installing Ganglia on Redhat Linux 6 as i am having trouble installing Ganglia and setup the Webpage. used these 2 links to Install but had some issues with python_module , after trying to run gmond service. ran this config file to know if all of the modules loaded successfully , i got the below error. Source to Install Ganglia : https://sachinsharm.wordpress.com/2013/08/17/setup-and-configure-ganglia-3-6-on-centosrhel-6-3/ Setup Python Modules link: https://sachinsharm.wordpress.com/2013/08/19/setup-and-configure-ganglia-python-modules-on-centosrhel-6-3/ *can't open the python module path /usr/local/lib64/ganglia/python_modules (where all the libraries for python exist)* *Module python_module failed to Initialize* *gmond -d 5 -c /etc/ganglia/gmond.conf* any help would be greatly appreciated. Thanks, -- Sreedhar Chava www.ePilupu.com (A traditional Indian Invitational Portal for all your Occasions) -- ___ Ganglia-general mailing list Ganglia-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ganglia-general
Re: [Ganglia-general] Ganglia Installation Issue On Mac OS X 10.9.2
Hi Rana, in apache configurations file i have to give the path of ganglia. like below Alias /ganglia /usr/lib/ganglia/index.php A On Mon, Mar 10, 2014 at 12:50 AM, Md. Ali Ahsan Rana aliahsanr...@gmail.com wrote: Hi, I am trying to set up ganglia on my mac os. it got installed properly, without any error. After setting up the web project and navigate, I am getting some apache error messages as below(for which I can't see any stat on webpage): Referenced from: /usr/local/lib/libpangocairo-1.0.0.dylib Reason: Incompatible library version: libpangocairo-1.0.0.dylib requires version 18.0.0 or later, but libfreetype.6.dylib provides version 16.0.0 dyld: Library not loaded: /usr/local/lib/libfreetype.6.dylib Can anyone have any idea , how to fix this issue please? Thanks. Regards Rana -- Subversion Kills Productivity. Get off Subversion Make the Move to Perforce. With Perforce, you get hassle-free workflows. Merge that actually works. Faster operations. Version large binaries. Built-in WAN optimization and the freedom to use Git, Perforce or both. Make the move to Perforce. http://pubads.g.doubleclick.net/gampad/clk?id=122218951iu=/4140/ostg.clktrk ___ Ganglia-general mailing list Ganglia-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ganglia-general -- Thanks, Viswanatha. -- Learn Graph Databases - Download FREE O'Reilly Book Graph Databases is the definitive new guide to graph databases and their applications. Written by three acclaimed leaders in the field, this first edition is now available. Download your free book today! http://p.sf.net/sfu/13534_NeoTech___ Ganglia-general mailing list Ganglia-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ganglia-general
Re: [Ganglia-general] Ganglia Installation Issue On Mac OS X 10.9.2
Hello Viswanath, Thanks for your reply. However, I probably didn't able to explain the issue properly. I don't have any issue on apache side. Rather, from apache error log, I think there are some inter compatibility issue of 'libfreetype' and 'libpangocairo' versions on my system. I have installed all using 'homebrew'... I did able to install and run the ganglia system on ubuntu, without any issue. Regards Rana On Mon, Mar 10, 2014 at 6:53 AM, Viswanath Reddy viswa1...@gmail.comwrote: Hi Rana, in apache configurations file i have to give the path of ganglia. like below Alias /ganglia /usr/lib/ganglia/index.php A On Mon, Mar 10, 2014 at 12:50 AM, Md. Ali Ahsan Rana aliahsanr...@gmail.com wrote: Hi, I am trying to set up ganglia on my mac os. it got installed properly, without any error. After setting up the web project and navigate, I am getting some apache error messages as below(for which I can't see any stat on webpage): Referenced from: /usr/local/lib/libpangocairo-1.0.0.dylib Reason: Incompatible library version: libpangocairo-1.0.0.dylib requires version 18.0.0 or later, but libfreetype.6.dylib provides version 16.0.0 dyld: Library not loaded: /usr/local/lib/libfreetype.6.dylib Can anyone have any idea , how to fix this issue please? Thanks. Regards Rana -- Subversion Kills Productivity. Get off Subversion Make the Move to Perforce. With Perforce, you get hassle-free workflows. Merge that actually works. Faster operations. Version large binaries. Built-in WAN optimization and the freedom to use Git, Perforce or both. Make the move to Perforce. http://pubads.g.doubleclick.net/gampad/clk?id=122218951iu=/4140/ostg.clktrk ___ Ganglia-general mailing list Ganglia-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ganglia-general -- Thanks, Viswanatha. -- Learn Graph Databases - Download FREE O'Reilly Book Graph Databases is the definitive new guide to graph databases and their applications. Written by three acclaimed leaders in the field, this first edition is now available. Download your free book today! http://p.sf.net/sfu/13534_NeoTech___ Ganglia-general mailing list Ganglia-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ganglia-general
[Ganglia-general] Ganglia Installation Issue On Mac OS X 10.9.2
Hi, I am trying to set up ganglia on my mac os. it got installed properly, without any error. After setting up the web project and navigate, I am getting some apache error messages as below(for which I can't see any stat on webpage): Referenced from: /usr/local/lib/libpangocairo-1.0.0.dylib Reason: Incompatible library version: libpangocairo-1.0.0.dylib requires version 18.0.0 or later, but libfreetype.6.dylib provides version 16.0.0 dyld: Library not loaded: /usr/local/lib/libfreetype.6.dylib Can anyone have any idea , how to fix this issue please? Thanks. Regards Rana -- Subversion Kills Productivity. Get off Subversion Make the Move to Perforce. With Perforce, you get hassle-free workflows. Merge that actually works. Faster operations. Version large binaries. Built-in WAN optimization and the freedom to use Git, Perforce or both. Make the move to Perforce. http://pubads.g.doubleclick.net/gampad/clk?id=122218951iu=/4140/ostg.clktrk___ Ganglia-general mailing list Ganglia-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ganglia-general
[Ganglia-general] GANGLIA Installation + GCC Prerequisits
Hello, I am trying to install Ganglia on AIX 5.3 including the prerequisite GCC files and Libraries. I have downloaded all the rpms needed. The install fails with the below error. I have both of these rpms in the list to be installed. Will you please assist me with this issue or point me to a resource that can assist me? Any assistance you can provide is greatly appreciated. Thank you for your time. error: failed dependencies: libgcc = 4.7.2-1 is needed by gcc-4.7.2-1 Ghassan Ghassan H Elnajjar VCU Health System/MCV Hospitals Systems Analyst Technology Engineering Services 701 East Franklin Street, suite 400 Richmond, VA 23298-0483 (804) 628-1150 work gelnaj...@mcvh-vcu.edu http://www.vcuhealth.org NOTE: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. -- VCU Health System http://www.vcuhealth.org-- Don't let slow site performance ruin your business. Deploy New Relic APM Deploy New Relic app performance management and know exactly what is happening inside your Ruby, Python, PHP, Java, and .NET app Try New Relic at no cost today and get our sweet Data Nerd shirt too! http://p.sf.net/sfu/newrelic-dev2dev___ Ganglia-general mailing list Ganglia-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ganglia-general
Re: [Ganglia-general] ganglia installation on production
This is really your call. I prefer installing from packages, some prefer building from source. There is really no right or wrong way. Vladimir On Thu, 8 Mar 2012, Baruch F wrote: Hey guysI've used ganglia for a while in our sandbox environment and would like to install it on production. How would you advice me to install it: to build from source or to install packages from debian repo (prod machines running ubuntu)? What way I would achieve fastest and most reliable installation? Till now I used to build from source. Then I have tried to install packages: ganglia-monitoring, gmetad and ganglia-webfront. I still need to configure few things, since it doesn't work out of the box, and it confuses me a bit, since I'd expect packages will just play after installation. Would highly appreciate your advice. Thanks Kr0n0s79 -- Virtualization Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/___ Ganglia-general mailing list Ganglia-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ganglia-general
[Ganglia-general] ganglia installation on production
Hey guys I've used ganglia for a while in our sandbox environment and would like to install it on production. How would you advice me to install it: to build from source or to install packages from debian repo (prod machines running ubuntu)? What way I would achieve fastest and most reliable installation? Till now I used to build from source. Then I have tried to install packages: ganglia-monitoring, gmetad and ganglia-webfront. I still need to configure few things, since it doesn't work out of the box, and it confuses me a bit, since I'd expect packages will just play after installation. Would highly appreciate your advice. Thanks Kr0n0s79 -- Virtualization Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/___ Ganglia-general mailing list Ganglia-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ganglia-general
Re: [Ganglia-general] Ganglia installation
Dear All
First of my apologise for not pursuing this.
I am still not able to run ganglia and Will want to have ganglia running.
Any help ?
With Best Regards
sunil
On Thu, Jul 14, 2011 at 2:29 PM, Sunil M. Dogra smdo...@gmail.com wrote:
Also
/etc/init.d/gmond status
gmond dead but subsys locked
With Best Regards
sunil
On Thu, Jul 14, 2011 at 2:28 PM, Sunil M. Dogra smdo...@gmail.com wrote:
Dear Vladmir Vuksan,
Thank you for email. Please see my replies below.
Thank you once again.
1. you have no tcp_accept_channels specified on the host
/* You can specify as many tcp_accept_channels as you like to share
an xml description of the state of the cluster */
tcp_accept_channel {
port = 8649
}
2. you have a setting of deaf = yes
globals {
daemonize = yes
setuid = yes
user = nobody
debug_level = 100
max_udp_msg_len = 1472
mute = no
deaf = no
allow_extra_data = yes
host_dmax = 0 /*secs */
cleanup_threshold = 300 /*secs */
gexec = no
send_metadata_interval = 0 /*secs */
}
starting gmond
/etc/init.d/gmond start
Starting GANGLIA gmond:[ OK ]
touch: cannot touch `/var/lock/subsys/gmond': Permission denied
With Best Regards
sunil
On Thu, Jul 14, 2011 at 6:56 AM, Vladimir Vuksan vli...@veus.hr wrote:
If you are getting connection refused when connecting to localhost:8649
it
means that
1. you have no tcp_accept_channels specified on the host
2. you have a setting of deaf = yes
3. Your gmond is not running. Please verify that gmond is running. If
not
try starting it up with gmond -d 5 and see if it gives you a hint why
it's
not starting up
On Tue, 12 Jul 2011, Sunil M. Dogra wrote:
Hi,
Will it be possible for some to point me from where I can learn how to
install / configure ganglia.
I have ganglia-3.1.7
I tried to follow the following link
http://www-hep.uta.edu/hep_notes/computing/computing_0025.pdf
http://wiki.freaks-unidos.net/ganglia-quickstart?tag=monitoring
telnet localhost 8649 gave the following error.
telnet: connect to address 127.0.0.1: Connection refused
telnet: Unable to connect to remote host: Connection refused
Any help will be appreciated
With Best Regards
sunil
--
All of the data generated in your IT infrastructure is seriously
valuable.
Why? It contains a definitive record of application performance,
security
threats, fraudulent activity, and more. Splunk takes this data and
makes
sense of it. IT sense. And common sense.
http://p.sf.net/sfu/splunk-d2d-c2
___
Ganglia-general mailing list
Ganglia-general@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ganglia-general
--
Special Offer -- Download ArcSight Logger for FREE!
Finally, a world-class log management solution at an even better
price-free! And you'll get a free Love Thy Logs t-shirt when you
download Logger. Secure your free ArcSight Logger TODAY!
http://p.sf.net/sfu/arcsisghtdev2dev___
Ganglia-general mailing list
Ganglia-general@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ganglia-general
Re: [Ganglia-general] Ganglia installation
Dear Vladmir Vuksan,
Thank you for email. Please see my replies below.
Thank you once again.
1. you have no tcp_accept_channels specified on the host
/* You can specify as many tcp_accept_channels as you like to share
an xml description of the state of the cluster */
tcp_accept_channel {
port = 8649
}
2. you have a setting of deaf = yes
globals {
daemonize = yes
setuid = yes
user = nobody
debug_level = 100
max_udp_msg_len = 1472
mute = no
deaf = no
allow_extra_data = yes
host_dmax = 0 /*secs */
cleanup_threshold = 300 /*secs */
gexec = no
send_metadata_interval = 0 /*secs */
}
starting gmond
/etc/init.d/gmond start
Starting GANGLIA gmond:[ OK ]
touch: cannot touch `/var/lock/subsys/gmond': Permission denied
With Best Regards
sunil
On Thu, Jul 14, 2011 at 6:56 AM, Vladimir Vuksan vli...@veus.hr wrote:
If you are getting connection refused when connecting to localhost:8649 it
means that
1. you have no tcp_accept_channels specified on the host
2. you have a setting of deaf = yes
3. Your gmond is not running. Please verify that gmond is running. If not
try starting it up with gmond -d 5 and see if it gives you a hint why it's
not starting up
On Tue, 12 Jul 2011, Sunil M. Dogra wrote:
Hi,
Will it be possible for some to point me from where I can learn how to
install / configure ganglia.
I have ganglia-3.1.7
I tried to follow the following link
http://www-hep.uta.edu/hep_notes/computing/computing_0025.pdf
http://wiki.freaks-unidos.net/ganglia-quickstart?tag=monitoring
telnet localhost 8649 gave the following error.
telnet: connect to address 127.0.0.1: Connection refused
telnet: Unable to connect to remote host: Connection refused
Any help will be appreciated
With Best Regards
sunil
--
All of the data generated in your IT infrastructure is seriously valuable.
Why? It contains a definitive record of application performance, security
threats, fraudulent activity, and more. Splunk takes this data and makes
sense of it. IT sense. And common sense.
http://p.sf.net/sfu/splunk-d2d-c2
___
Ganglia-general mailing list
Ganglia-general@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ganglia-general
--
AppSumo Presents a FREE Video for the SourceForge Community by Eric
Ries, the creator of the Lean Startup Methodology on Lean Startup
Secrets Revealed. This video shows you how to validate your ideas,
optimize your ideas and identify your business strategy.
http://p.sf.net/sfu/appsumosfdev2dev
___
Ganglia-general mailing list
Ganglia-general@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ganglia-general
Re: [Ganglia-general] Ganglia installation
Also
/etc/init.d/gmond status
gmond dead but subsys locked
With Best Regards
sunil
On Thu, Jul 14, 2011 at 2:28 PM, Sunil M. Dogra smdo...@gmail.com wrote:
Dear Vladmir Vuksan,
Thank you for email. Please see my replies below.
Thank you once again.
1. you have no tcp_accept_channels specified on the host
/* You can specify as many tcp_accept_channels as you like to share
an xml description of the state of the cluster */
tcp_accept_channel {
port = 8649
}
2. you have a setting of deaf = yes
globals {
daemonize = yes
setuid = yes
user = nobody
debug_level = 100
max_udp_msg_len = 1472
mute = no
deaf = no
allow_extra_data = yes
host_dmax = 0 /*secs */
cleanup_threshold = 300 /*secs */
gexec = no
send_metadata_interval = 0 /*secs */
}
starting gmond
/etc/init.d/gmond start
Starting GANGLIA gmond: [ OK ]
touch: cannot touch `/var/lock/subsys/gmond': Permission denied
With Best Regards
sunil
On Thu, Jul 14, 2011 at 6:56 AM, Vladimir Vuksan vli...@veus.hr wrote:
If you are getting connection refused when connecting to localhost:8649 it
means that
1. you have no tcp_accept_channels specified on the host
2. you have a setting of deaf = yes
3. Your gmond is not running. Please verify that gmond is running. If not
try starting it up with gmond -d 5 and see if it gives you a hint why it's
not starting up
On Tue, 12 Jul 2011, Sunil M. Dogra wrote:
Hi,
Will it be possible for some to point me from where I can learn how to
install / configure ganglia.
I have ganglia-3.1.7
I tried to follow the following link
http://www-hep.uta.edu/hep_notes/computing/computing_0025.pdf
http://wiki.freaks-unidos.net/ganglia-quickstart?tag=monitoring
telnet localhost 8649 gave the following error.
telnet: connect to address 127.0.0.1: Connection refused
telnet: Unable to connect to remote host: Connection refused
Any help will be appreciated
With Best Regards
sunil
--
All of the data generated in your IT infrastructure is seriously valuable.
Why? It contains a definitive record of application performance, security
threats, fraudulent activity, and more. Splunk takes this data and makes
sense of it. IT sense. And common sense.
http://p.sf.net/sfu/splunk-d2d-c2
___
Ganglia-general mailing list
Ganglia-general@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ganglia-general
--
AppSumo Presents a FREE Video for the SourceForge Community by Eric
Ries, the creator of the Lean Startup Methodology on Lean Startup
Secrets Revealed. This video shows you how to validate your ideas,
optimize your ideas and identify your business strategy.
http://p.sf.net/sfu/appsumosfdev2dev
___
Ganglia-general mailing list
Ganglia-general@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ganglia-general
Re: [Ganglia-general] Ganglia installation
If you are getting connection refused when connecting to localhost:8649 it means that 1. you have no tcp_accept_channels specified on the host 2. you have a setting of deaf = yes 3. Your gmond is not running. Please verify that gmond is running. If not try starting it up with gmond -d 5 and see if it gives you a hint why it's not starting up On Tue, 12 Jul 2011, Sunil M. Dogra wrote: Hi, Will it be possible for some to point me from where I can learn how to install / configure ganglia. I have ganglia-3.1.7 I tried to follow the following link http://www-hep.uta.edu/hep_notes/computing/computing_0025.pdf http://wiki.freaks-unidos.net/ganglia-quickstart?tag=monitoring telnet localhost 8649 gave the following error. telnet: connect to address 127.0.0.1: Connection refused telnet: Unable to connect to remote host: Connection refused Any help will be appreciated With Best Regards sunil -- All of the data generated in your IT infrastructure is seriously valuable. Why? It contains a definitive record of application performance, security threats, fraudulent activity, and more. Splunk takes this data and makes sense of it. IT sense. And common sense. http://p.sf.net/sfu/splunk-d2d-c2 ___ Ganglia-general mailing list Ganglia-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ganglia-general -- AppSumo Presents a FREE Video for the SourceForge Community by Eric Ries, the creator of the Lean Startup Methodology on Lean Startup Secrets Revealed. This video shows you how to validate your ideas, optimize your ideas and identify your business strategy. http://p.sf.net/sfu/appsumosfdev2dev ___ Ganglia-general mailing list Ganglia-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ganglia-general
[Ganglia-general] Ganglia installation
Hi, Will it be possible for some to point me from where I can learn how to install / configure ganglia. I have ganglia-3.1.7 I tried to follow the following link http://www-hep.uta.edu/hep_notes/computing/computing_0025.pdf http://wiki.freaks-unidos.net/ganglia-quickstart?tag=monitoring telnet localhost 8649 gave the following error. telnet: connect to address 127.0.0.1: Connection refused telnet: Unable to connect to remote host: Connection refused Any help will be appreciated With Best Regards sunil -- All of the data generated in your IT infrastructure is seriously valuable. Why? It contains a definitive record of application performance, security threats, fraudulent activity, and more. Splunk takes this data and makes sense of it. IT sense. And common sense. http://p.sf.net/sfu/splunk-d2d-c2 ___ Ganglia-general mailing list Ganglia-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ganglia-general
Re: [Ganglia-general] Ganglia Installation Issues
Hey, Mike, 2010/12/7 Mike nano_kol...@yahoo.com Hi Antonio, I could finally see the Ganglia up running in the webinterface. I restarted everything and now its fine. Thanks a lot for your help. Now I am looking for monitoring hadoop using Ganglia. I added the metrics properties to the hadoop-metrics properties. Is there something else I have to do to see the hadoop metrics in ganglia? Thanks, Mike nice to read that, it's always my pleasure helping. I don't know how these metrics work but I recommend you these two guides in order to do the steps for the metric setup: ganglia doc [1] and ganglia and nagios IBM setup [2]. If you still have any question, feel free of asking. Best regards, Antonio Óscar Balmaseda [1] http://sourceforge.net/apps/trac/ganglia/wiki/ganglia_gmond_python_modules [2] https://www.ibm.com/developerworks/linux/library/l-ganglia-nagios-1/ -- What happens now with your Lotus Notes apps - do you make another costly upgrade, or settle for being marooned without product support? Time to move off Lotus Notes and onto the cloud with Force.com, apps are easier to build, use, and manage than apps on traditional platforms. Sign up for the Lotus Notes Migration Kit to learn more. http://p.sf.net/sfu/salesforce-d2d___ Ganglia-general mailing list Ganglia-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ganglia-general
Re: [Ganglia-general] Ganglia Installation Issues
2010/12/6 Mike nano_kol...@yahoo.com
Yes, I have the web folder copied to /var/www/ganglia
Do we have to keep in gmond.conf,
tcp_accept_channel {
port = 8649
}
Because trying to start gmond with this included in the conf gave me an
error Unable to create tcp_accept_channel. So I removed this from
gmond.conf
Thanks,
Mike
--- On *Mon, 12/6/10, Antonio Óscar Balmaseda
antonio.o.balmas...@gmail.com* wrote:
From: Antonio Óscar Balmaseda antonio.o.balmas...@gmail.com
Subject: Re: [Ganglia-general] Ganglia Installation Issues
To: Mike nano_kol...@yahoo.com
Cc: Ganglia ganglia-general@lists.sourceforge.net
Date: Monday, December 6, 2010, 9:07 PM
2010/12/6 Mike
nano_kol...@yahoo.comhttp://mc/compose?to=nano_kol...@yahoo.com
Hi Antonio,
Thanks much for your response. I now ran /usr/sbin/update-rc.d -f gmond
defaults and
/usr/sbin/update-rc.d -f gmetad defaults, which initially gave me error:
update-rc.d: /etc/init.d/gmond: file does not exist. The init script was in
/etc/rc.d/init.d/. Then I copied it to /etc/init.d/gmond. Now the
update-rc.d went fine .
I cannot view the web interface when I point to http://ip_address/ganglia/
and I get The server at ip_address is taking too long to respond.
Here are some relevant information:
A) I start gmond by /usr/sbin/gmond when I do a telnet EC2Ip_address8649,
it gives
HOST NAME=EC2Ip_address IP=10.251.86.192 REPORTED=1291666741 TN=30
TMAX=20 DMAX=0 LOCATION=EC2Ip_address GMOND_STARTED=129121
B) /usr/sbin/gmond -d 10 gives me this:
Got a heartbeat message 1291666768
metric 'cpu_user' being collected now
metric 'cpu_user' has value_threshold 1.00
metric 'cpu_system' being collected now
metric 'cpu_system' has value_threshold 1.00
metric 'cpu_idle' being collected now
metric 'cpu_idle' has value_threshold 5.00
metric 'cpu_nice' being collected now
metric 'cpu_nice' has value_threshold 1.00
metric 'cpu_aidle' being collected now
metric 'cpu_aidle' has value_threshold 5.00
metric 'cpu_wio' being collected now
metric 'cpu_wio' has value_threshold 1.00
metric 'load_one' being collected now
metric 'load_one' has value_threshold 1.00
metric 'load_five' being collected now
metric 'load_five' has value_threshold 1.00
metric 'load_fifteen' being collected now
metric 'load_fifteen' has value_threshold 1.00
sent message 'heartbeat' of length 56 with 0 errors
Processing a metric value message from EC2_IP
Got a heartbeat message 1291667489
and goes on
C) /usr/sbin/gmetad -d 10 gives me this
Going to run as user nobody
Sources are ...
Source: [MyCluster, step 15] has 1 sources
10.251.86.192
xml listening on port 8651
interactive xml listening on port 8652
cleanup thread has been started
Data thread 1147169104 is monitoring [MyCluster] data source
10.251.86.192
[MyCluster] is a 2.5 or later data stream
hash_create size = 1024
hash-size is 1031
hash_create size = 50
hash-size is 53
hash_create size = 50
hash-size is 53
[MyCluster] is a 2.5 or later data stream
[MyCluster] is a 2.5 or later data stream
[MyCluster] is a 2.5 or later data stream
[MyCluster] is a 2.5 or later data stream
[MyCluster] is a 2.5 or later data stream
[MyCluster] is a 2.5 or later data stream
...etc
D) Here are the relevant parts in my /etc/ganglia/gmond.conf
cluster {
name = MyCluster
owner = myclusterowner
latlong = unspecified
url = unspecified
}
host {
location = IP_of_EC2
}
udp_send_channel {
mcast_join = IP_of_EC2
port = 8666
ttl = 1
}
udp_recv_channel {
port = 8666
family = inet4
}
And gmetad.conf has
data_source MyCluster ipaddress:8649
Any help on this would be highly appreciated!.
Thanks,
Mike
If I'm not wrong, this error is showed when gmond is already running. You
have to keep this lines to get working the system. Try readd the lines,
stopping gmond and restarting, it must work fine.
One question: you can see the ganglia website in any case, isn't?
Regards,
Antonio.
--
What happens now with your Lotus Notes apps - do you make another costly
upgrade, or settle for being marooned without product support? Time to move
off Lotus Notes and onto the cloud with Force.com, apps are easier to build,
use, and manage than apps on traditional platforms. Sign up for the Lotus
Notes Migration Kit to learn more. http://p.sf.net/sfu/salesforce-d2d___
Ganglia-general mailing list
Ganglia-general@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ganglia-general
Re: [Ganglia-general] Ganglia Installation Issues
Hi Antonio,
I could finally see the Ganglia up running in the webinterface. I restarted
everything and now its fine.
Thanks a lot for your help.
Now I am looking for monitoring hadoop using Ganglia. I added the metrics
properties to the hadoop-metrics properties. Is there something else I have to
do to see the hadoop metrics in ganglia?
Thanks,
Mike
--- On Tue, 12/7/10, Antonio Óscar Balmaseda antonio.o.balmas...@gmail.com
wrote:
From: Antonio Óscar Balmaseda antonio.o.balmas...@gmail.com
Subject: Re: [Ganglia-general] Ganglia Installation Issues
To: Mike nano_kol...@yahoo.com
Cc: Ganglia ganglia-general@lists.sourceforge.net
Date: Tuesday, December 7, 2010, 11:37 AM
2010/12/6 Mike nano_kol...@yahoo.com
Yes, I have the web folder copied to /var/www/ganglia
Do we have to keep in gmond.conf,
tcp_accept_channel {
port = 8649
}
Because trying to start gmond with this included in the conf gave me an error
Unable to create tcp_accept_channel. So I removed this from gmond.conf
Thanks,
Mike
--- On Mon, 12/6/10, Antonio Óscar Balmaseda antonio.o.balmas...@gmail.com
wrote:
From: Antonio Óscar Balmaseda antonio.o.balmas...@gmail.com
Subject: Re: [Ganglia-general] Ganglia Installation Issues
To: Mike nano_kol...@yahoo.com
Cc: Ganglia ganglia-general@lists.sourceforge.net
Date: Monday,
December 6, 2010, 9:07 PM
2010/12/6 Mike nano_kol...@yahoo.com
Hi Antonio,
Thanks much for your response. I now ran /usr/sbin/update-rc.d -f gmond
defaults and
/usr/sbin/update-rc.d -f gmetad defaults, which initially gave me error:
update-rc.d: /etc/init.d/gmond: file does not exist. The init script was in
/etc/rc.d/init.d/. Then I copied it to /etc/init.d/gmond. Now the update-rc.d
went fine .
I cannot view the web interface when I point to http://ip_address/ganglia/
and I get The server at ip_address is taking too long to respond.
Here are some relevant information:
A) I start gmond by /usr/sbin/gmond when I do a telnet EC2Ip_address 8649,
it gives
HOST NAME=EC2Ip_address IP=10.251.86.192 REPORTED=1291666741 TN=30
TMAX=20 DMAX=0 LOCATION=EC2Ip_address GMOND_STARTED=129121
B) /usr/sbin/gmond -d 10 gives me this:
Got a heartbeat message 1291666768
metric 'cpu_user' being collected now
metric 'cpu_user' has value_threshold 1.00
metric 'cpu_system' being collected now
metric 'cpu_system' has value_threshold 1.00
metric 'cpu_idle' being collected now
metric 'cpu_idle' has value_threshold 5.00
metric 'cpu_nice' being collected now
metric 'cpu_nice' has value_threshold 1.00
metric 'cpu_aidle' being collected now
metric 'cpu_aidle' has value_threshold 5.00
metric 'cpu_wio' being collected now
metric 'cpu_wio' has value_threshold 1.00
metric 'load_one' being collected now
metric 'load_one' has value_threshold 1.00
metric 'load_five' being collected now
metric 'load_five' has value_threshold 1.00
metric 'load_fifteen' being collected now
metric 'load_fifteen' has value_threshold 1.00
sent message 'heartbeat' of length 56 with 0 errors
Processing a metric value message from EC2_IP
Got a heartbeat message 1291667489
and goes on
C) /usr/sbin/gmetad -d 10 gives me this
Going to run as user nobody
Sources are ...
Source:
[MyCluster, step 15] has 1 sources
10.251.86.192
xml listening on port 8651
interactive xml listening on port 8652
cleanup thread has been started
Data thread 1147169104 is monitoring [MyCluster] data source
10.251.86.192
[MyCluster] is a 2.5 or later data stream
hash_create size = 1024
hash-size is 1031
hash_create size = 50
hash-size is 53
hash_create size = 50
hash-size is 53
[MyCluster] is a 2.5 or later data stream
[MyCluster] is a 2.5 or later data stream
[MyCluster] is a 2.5 or later data stream
[MyCluster] is a 2.5 or later data stream
[MyCluster] is a 2.5 or later data stream
[MyCluster] is a 2.5 or later data stream
...etc
D) Here are the relevant parts in my /etc/ganglia/gmond.conf
cluster {
name = MyCluster
owner = myclusterowner
latlong = unspecified
url = unspecified
}
host {
location = IP_of_EC2
}
udp_send_channel {
mcast_join = IP_of_EC2
port = 8666
ttl = 1
}
udp_recv_channel {
port = 8666
family = inet4
}
And gmetad.conf has
data_source MyCluster ipaddress:8649
Any help on this would be highly appreciated!.
Thanks,
Mike
If I'm not wrong, this error is showed when gmond is already running. You have
to keep this lines to get working the system. Try readd the lines, stopping
gmond and restarting, it must work fine.
One question: you can see the ganglia website in any case, isn't?
Regards,
Antonio
Re: [Ganglia-general] Ganglia Installation Issues
Hi Antonio,
Thanks much for your response. I now ran /usr/sbin/update-rc.d -f gmond
defaults and
/usr/sbin/update-rc.d -f gmetad defaults, which initially gave me error:
update-rc.d: /etc/init.d/gmond: file does not exist. The init script was in
/etc/rc.d/init.d/. Then I copied it to /etc/init.d/gmond. Now the update-rc.d
went fine .
I cannot view the web interface when I point to http://ip_address/ganglia/
and I get The server at ip_address is taking too long to respond.
Here are some relevant information:
A) I start gmond by /usr/sbin/gmond when I do a telnet EC2Ip_address 8649,
it gives
HOST NAME=EC2Ip_address IP=10.251.86.192 REPORTED=1291666741 TN=30
TMAX=20 DMAX=0 LOCATION=EC2Ip_address GMOND_STARTED=129121
B) /usr/sbin/gmond -d 10 gives me this:
Got a heartbeat message 1291666768
metric 'cpu_user' being collected now
metric 'cpu_user' has value_threshold 1.00
metric 'cpu_system' being collected now
metric 'cpu_system' has value_threshold 1.00
metric 'cpu_idle' being collected now
metric 'cpu_idle' has value_threshold 5.00
metric 'cpu_nice' being collected now
metric 'cpu_nice' has value_threshold 1.00
metric 'cpu_aidle' being collected now
metric 'cpu_aidle' has value_threshold 5.00
metric 'cpu_wio' being collected now
metric 'cpu_wio' has value_threshold 1.00
metric 'load_one' being collected now
metric 'load_one' has value_threshold 1.00
metric 'load_five' being collected now
metric 'load_five' has value_threshold 1.00
metric 'load_fifteen' being collected now
metric 'load_fifteen' has value_threshold 1.00
sent message 'heartbeat' of length 56 with 0 errors
Processing a metric value message from EC2_IP
Got a heartbeat message 1291667489
and goes on
C) /usr/sbin/gmetad -d 10 gives me this
Going to run as user nobody
Sources are ...
Source: [MyCluster, step 15] has 1 sources
10.251.86.192
xml listening on port 8651
interactive xml listening on port 8652
cleanup thread has been started
Data thread 1147169104 is monitoring [MyCluster] data source
10.251.86.192
[MyCluster] is a 2.5 or later data stream
hash_create size = 1024
hash-size is 1031
hash_create size = 50
hash-size is 53
hash_create size = 50
hash-size is 53
[MyCluster] is a 2.5 or later data stream
[MyCluster] is a 2.5 or later data stream
[MyCluster] is a 2.5 or later data stream
[MyCluster] is a 2.5 or later data stream
[MyCluster] is a 2.5 or later data stream
[MyCluster] is a 2.5 or later data stream
...etc
D) Here are the relevant parts in my /etc/ganglia/gmond.conf
cluster {
name = MyCluster
owner = myclusterowner
latlong = unspecified
url = unspecified
}
host {
location = IP_of_EC2
}
udp_send_channel {
mcast_join = IP_of_EC2
port = 8666
ttl = 1
}
udp_recv_channel {
port = 8666
family = inet4
}
And gmetad.conf has
data_source MyCluster ipaddress:8649
Any help on this would be highly appreciated!.
Thanks,
Mike
--- On Sun, 12/5/10, Antonio Óscar Balmaseda antonio.o.balmas...@gmail.com
wrote:
From: Antonio Óscar Balmaseda antonio.o.balmas...@gmail.com
Subject: Re: [Ganglia-general] Ganglia Installation Issues
To: Mike nano_kol...@yahoo.com
Cc: Ganglia ganglia-general@lists.sourceforge.net
Date: Sunday, December 5, 2010, 9:57 AM
Hey, Mike,
2010/12/5 Mike nano_kol...@yahoo.com
Hi all,
I am trying to get Ganglia run on Ubuntu instance. I built the version 3.1.7
from source. I compiled the source and libs were installed in
/etc/ganglia/lib64/ganglia/
I used the command: ./configure --prefix=/etc/ganglia --with-gmetad
--sysconfdir=/etc/ganglia make make install , and everything went fine.
Ichanged the GMOND in gmond/gmond.init to GMOND=/etc/ganglia/sbin/gmond, and
changed GMETAD in gmetad/gmetad.init to GMETAD=/etc/ganglia/sbin/gmetad
1. I have copied the gmond/gmond.init from the build directory to
/etc/rc.d/init.d/gmond and when I start gmond using the command
/etc/rc.d/init.d/gmond start
I get the following error.
.: 9: Can't open /etc/rc.d/init.d/functions
Also I copied gmetad/gmetad.init to /etc/rc.d/init.d/gmetad and starting it
also fails with the above error.
What is expected for /etc/rc.d/init.d/functions ? by these scripts.
When I try something like gmond -d 1 to start the gmond in foreground it
gives a message that :
[PYTHON] Can't open the python module path
/etc/ganglia/lib64/ganglia/python_modules. Module python_module failed to
initialize.
In this case, you have to put gmond and gmetad in the startup applications. You
can do this with:
$ sudo updatedb-rc.d -f gmond defaults
$ sudo updatedb-rc.d -f gmetad defaults
The other thing can be solved creating this directory or comment the line that
searches it in /etc/ganglia/gmond.conf. I'm not sure if it's necessary but the
owner of this folder is 'nobody' in my
Re: [Ganglia-general] Ganglia Installation Issues
2010/12/6 Mike nano_kol...@yahoo.com
Hi Antonio,
Thanks much for your response. I now ran /usr/sbin/update-rc.d -f gmond
defaults and
/usr/sbin/update-rc.d -f gmetad defaults, which initially gave me error:
update-rc.d: /etc/init.d/gmond: file does not exist. The init script was in
/etc/rc.d/init.d/. Then I copied it to /etc/init.d/gmond. Now the
update-rc.d went fine .
I cannot view the web interface when I point to http://ip_address/ganglia/
and I get The server at ip_address is taking too long to respond.
Here are some relevant information:
A) I start gmond by /usr/sbin/gmond when I do a telnet EC2Ip_address8649,
it gives
HOST NAME=EC2Ip_address IP=10.251.86.192 REPORTED=1291666741 TN=30
TMAX=20 DMAX=0 LOCATION=EC2Ip_address GMOND_STARTED=129121
B) /usr/sbin/gmond -d 10 gives me this:
Got a heartbeat message 1291666768
metric 'cpu_user' being collected now
metric 'cpu_user' has value_threshold 1.00
metric 'cpu_system' being collected now
metric 'cpu_system' has value_threshold 1.00
metric 'cpu_idle' being collected now
metric 'cpu_idle' has value_threshold 5.00
metric 'cpu_nice' being collected now
metric 'cpu_nice' has value_threshold 1.00
metric 'cpu_aidle' being collected now
metric 'cpu_aidle' has value_threshold 5.00
metric 'cpu_wio' being collected now
metric 'cpu_wio' has value_threshold 1.00
metric 'load_one' being collected now
metric 'load_one' has value_threshold 1.00
metric 'load_five' being collected now
metric 'load_five' has value_threshold 1.00
metric 'load_fifteen' being collected now
metric 'load_fifteen' has value_threshold 1.00
sent message 'heartbeat' of length 56 with 0 errors
Processing a metric value message from EC2_IP
Got a heartbeat message 1291667489
and goes on
C) /usr/sbin/gmetad -d 10 gives me this
Going to run as user nobody
Sources are ...
Source: [MyCluster, step 15] has 1 sources
10.251.86.192
xml listening on port 8651
interactive xml listening on port 8652
cleanup thread has been started
Data thread 1147169104 is monitoring [MyCluster] data source
10.251.86.192
[MyCluster] is a 2.5 or later data stream
hash_create size = 1024
hash-size is 1031
hash_create size = 50
hash-size is 53
hash_create size = 50
hash-size is 53
[MyCluster] is a 2.5 or later data stream
[MyCluster] is a 2.5 or later data stream
[MyCluster] is a 2.5 or later data stream
[MyCluster] is a 2.5 or later data stream
[MyCluster] is a 2.5 or later data stream
[MyCluster] is a 2.5 or later data stream
...etc
D) Here are the relevant parts in my /etc/ganglia/gmond.conf
cluster {
name = MyCluster
owner = myclusterowner
latlong = unspecified
url = unspecified
}
host {
location = IP_of_EC2
}
udp_send_channel {
mcast_join = IP_of_EC2
port = 8666
ttl = 1
}
udp_recv_channel {
port = 8666
family = inet4
}
And gmetad.conf has
data_source MyCluster ipaddress:8649
Any help on this would be highly appreciated!.
Thanks,
Mike
How is it going?
That's weird. Did you copy the files ganglia-X.YY/web in /var/www? Because
it seems that gmond gmetad are working fine...
Antonio.
--
What happens now with your Lotus Notes apps - do you make another costly
upgrade, or settle for being marooned without product support? Time to move
off Lotus Notes and onto the cloud with Force.com, apps are easier to build,
use, and manage than apps on traditional platforms. Sign up for the Lotus
Notes Migration Kit to learn more. http://p.sf.net/sfu/salesforce-d2d___
Ganglia-general mailing list
Ganglia-general@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ganglia-general
Re: [Ganglia-general] Ganglia Installation Issues
Yes, I have the web folder copied to /var/www/ganglia
Do we have to keep in gmond.conf,
tcp_accept_channel {
port = 8649
}
Because trying to start gmond with this included in the conf gave me an error
Unable to create tcp_accept_channel. So I removed this from gmond.conf
Thanks,
Mike
--- On Mon, 12/6/10, Antonio Óscar Balmaseda antonio.o.balmas...@gmail.com
wrote:
From: Antonio Óscar Balmaseda antonio.o.balmas...@gmail.com
Subject: Re: [Ganglia-general] Ganglia Installation Issues
To: Mike nano_kol...@yahoo.com
Cc: Ganglia ganglia-general@lists.sourceforge.net
Date: Monday, December 6, 2010, 9:07 PM
2010/12/6 Mike nano_kol...@yahoo.com
Hi Antonio,
Thanks much for your response. I now ran /usr/sbin/update-rc.d -f gmond
defaults and
/usr/sbin/update-rc.d -f gmetad defaults, which initially gave me error:
update-rc.d: /etc/init.d/gmond: file does not exist. The init script was in
/etc/rc.d/init.d/. Then I copied it to /etc/init.d/gmond. Now the update-rc.d
went fine .
I cannot view the web interface when I point to http://ip_address/ganglia/
and I get The server at ip_address is taking too long to respond.
Here are some relevant information:
A) I start gmond by /usr/sbin/gmond when I do a telnet EC2Ip_address 8649,
it gives
HOST NAME=EC2Ip_address IP=10.251.86.192 REPORTED=1291666741 TN=30
TMAX=20 DMAX=0 LOCATION=EC2Ip_address GMOND_STARTED=129121
B) /usr/sbin/gmond -d 10 gives me this:
Got a heartbeat message 1291666768
metric 'cpu_user' being collected now
metric 'cpu_user' has value_threshold 1.00
metric 'cpu_system' being collected now
metric 'cpu_system' has value_threshold 1.00
metric 'cpu_idle' being collected now
metric 'cpu_idle' has value_threshold 5.00
metric 'cpu_nice' being collected now
metric 'cpu_nice' has value_threshold 1.00
metric 'cpu_aidle' being collected now
metric 'cpu_aidle' has value_threshold 5.00
metric 'cpu_wio' being collected now
metric 'cpu_wio' has value_threshold 1.00
metric 'load_one' being collected now
metric 'load_one' has value_threshold 1.00
metric 'load_five' being collected now
metric 'load_five' has value_threshold 1.00
metric 'load_fifteen' being collected now
metric 'load_fifteen' has value_threshold 1.00
sent message 'heartbeat' of length 56 with 0 errors
Processing a metric value message from EC2_IP
Got a heartbeat message 1291667489
and goes on
C) /usr/sbin/gmetad -d 10 gives me this
Going to run as user nobody
Sources are ...
Source:
[MyCluster, step 15] has 1 sources
10.251.86.192
xml listening on port 8651
interactive xml listening on port 8652
cleanup thread has been started
Data thread 1147169104 is monitoring [MyCluster] data source
10.251.86.192
[MyCluster] is a 2.5 or later data stream
hash_create size = 1024
hash-size is 1031
hash_create size = 50
hash-size is 53
hash_create size = 50
hash-size is 53
[MyCluster] is a 2.5 or later data stream
[MyCluster] is a 2.5 or later data stream
[MyCluster] is a 2.5 or later data stream
[MyCluster] is a 2.5 or later data stream
[MyCluster] is a 2.5 or later data stream
[MyCluster] is a 2.5 or later data stream
...etc
D) Here are the relevant parts in my /etc/ganglia/gmond.conf
cluster {
name = MyCluster
owner = myclusterowner
latlong = unspecified
url = unspecified
}
host {
location = IP_of_EC2
}
udp_send_channel {
mcast_join = IP_of_EC2
port = 8666
ttl = 1
}
udp_recv_channel {
port = 8666
family = inet4
}
And gmetad.conf has
data_source MyCluster ipaddress:8649
Any help on this would be highly appreciated!.
Thanks,
Mike
How is it going?
That's weird. Did you copy the files ganglia-X.YY/web in /var/www? Because it
seems that gmond gmetad are working fine...
Antonio.
--
What happens now with your Lotus Notes apps - do you make another costly
upgrade, or settle for being marooned without product support? Time to move
off Lotus Notes and onto the cloud with Force.com, apps are easier to build,
use, and manage than apps on traditional platforms. Sign up for the Lotus
Notes Migration Kit to learn more. http://p.sf.net/sfu/salesforce-d2d___
Ganglia-general mailing list
Ganglia-general@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ganglia-general
Re: [Ganglia-general] Ganglia Installation Issues
Hey, Mike,
2010/12/5 Mike nano_kol...@yahoo.com
Hi all,
I am trying to get Ganglia run on Ubuntu instance. I built the version
3.1.7 from source. I compiled the source and libs were installed in
/etc/ganglia/lib64/ganglia/
I used the command: ./configure --prefix=/etc/ganglia --with-gmetad
--sysconfdir=/etc/ganglia make make install , and everything went
fine.
Ichanged the GMOND in gmond/gmond.init to GMOND=/etc/ganglia/sbin/gmond,
and changed GMETAD in gmetad/gmetad.init to GMETAD=/etc/ganglia/sbin/gmetad
1. I have copied the gmond/gmond.init from the build directory to
/etc/rc.d/init.d/gmond and when I start gmond using the command
/etc/rc.d/init.d/gmond start
I get the following error.
.: 9: Can't open /etc/rc.d/init.d/functions
Also I copied gmetad/gmetad.init to /etc/rc.d/init.d/gmetad and starting it
also fails with the above error. What is expected for
/etc/rc.d/init.d/functions ? by these scripts.
When I try something like gmond -d 1 to start the gmond in foreground it
gives a message that :
[PYTHON] Can't open the python module path
/etc/ganglia/lib64/ganglia/python_modules. Module python_module failed to
initialize.
In this case, you have to put gmond and gmetad in the startup applications.
You can do this with:
$ sudo updatedb-rc.d -f gmond defaults
$ sudo updatedb-rc.d -f gmetad defaults
The other thing can be solved creating this directory or comment the line
that searches it in /etc/ganglia/gmond.conf. I'm not sure if it's necessary
but the owner of this folder is 'nobody' in my system. I recommend this
order:
$ sudo mkdir -p /etc/ganglia/lib64/ganglia/python_modules
2. Also I am running an EC2 instance, so while making the changes in the
conf files,
In the gmetad.conf I made foll changes:
a. data_source MyCluster 'internalIP of the instance' ( or should I
add external IP of the instance?)
b. What should I set for User gmetad will setuid to (defaults to
nobody). My rrd directory is at /var/lib/ganglia/rrds and is owned by
root.So
should I set the user here as root?
In the gmond.conf I have the foll:
cluster {
name = MyCluster
owner = MyOwner
latlong = unspecified
url = unspecified}
host { location = unspecified}(again what should go in here???)
udp_send_channel {
mcast_join = 239.2.11.71
port = 8649
ttl = 1}
udp_recv_channel {
mcast_join = 239.2.11.71
port = 8649
bind = 239.2.11.71}
tcp_accept_channel {
port = 8649}
All other conf paremeters are unchanged.
Please help me with this.
To your question a, I'm not sure but I don't think so. Nevertheless, the
question b is clear. You have to make owner to the user 'nobody'. If you
don't, ganglia can't write in that directory.
Thanks,
Mike
Ganglia-general mailing list
Ganglia-general@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ganglia-general
Regards,
Antonio.
--
What happens now with your Lotus Notes apps - do you make another costly
upgrade, or settle for being marooned without product support? Time to move
off Lotus Notes and onto the cloud with Force.com, apps are easier to build,
use, and manage than apps on traditional platforms. Sign up for the Lotus
Notes Migration Kit to learn more. http://p.sf.net/sfu/salesforce-d2d___
Ganglia-general mailing list
Ganglia-general@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ganglia-general
[Ganglia-general] Ganglia Installation Issues
Hi all,
I am trying to get Ganglia run on Ubuntu instance. I built the version 3.1.7
from source. I compiled the source and libs were installed in
/etc/ganglia/lib64/ganglia/
I used the command: ./configure --prefix=/etc/ganglia --with-gmetad
--sysconfdir=/etc/ganglia make make install , and everything went fine.
Ichanged the GMOND in gmond/gmond.init to GMOND=/etc/ganglia/sbin/gmond, and
changed GMETAD in gmetad/gmetad.init to GMETAD=/etc/ganglia/sbin/gmetad
1. I have copied the gmond/gmond.init from the build directory to
/etc/rc.d/init.d/gmond and when I start gmond using the command
/etc/rc.d/init.d/gmond start
I get the following error.
.: 9: Can't open /etc/rc.d/init.d/functions
Also I copied gmetad/gmetad.init to /etc/rc.d/init.d/gmetad and starting it
also fails with the above error. What is expected for
/etc/rc.d/init.d/functions ? by these scripts.
When I try something like gmond -d 1 to start the gmond in foreground it
gives a message that :
[PYTHON] Can't open the python module path
/etc/ganglia/lib64/ganglia/python_modules. Module python_module failed to
initialize.
2. Also I am running an EC2 instance, so while making the changes in the conf
files,
In the gmetad.conf I made foll changes:
a. data_source MyCluster 'internalIP of the instance' ( or should I add
external IP of the instance?)
b. What should I set for User gmetad will setuid to (defaults to
nobody). My rrd directory is at /var/lib/ganglia/rrds and is owned by
root.So
should I set the user here as root?
In the gmond.conf I have the foll:
cluster {
name = MyCluster
owner = MyOwner
latlong = unspecified
url = unspecified}
host { location = unspecified} (again what should go in here???)
udp_send_channel {
mcast_join = 239.2.11.71
port = 8649
ttl = 1}
udp_recv_channel {
mcast_join = 239.2.11.71
port = 8649
bind = 239.2.11.71}
tcp_accept_channel {
port = 8649}
All other conf paremeters are unchanged.
Please help me with this.
Thanks,
Mike
--
What happens now with your Lotus Notes apps - do you make another costly
upgrade, or settle for being marooned without product support? Time to move
off Lotus Notes and onto the cloud with Force.com, apps are easier to build,
use, and manage than apps on traditional platforms. Sign up for the Lotus
Notes Migration Kit to learn more. http://p.sf.net/sfu/salesforce-d2d___
Ganglia-general mailing list
Ganglia-general@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ganglia-general
[Ganglia-general] Ganglia Installation issues!URGENT
Hi all,
I am trying to get Ganglia run on Ubuntu instance. I built the version
3.1.7
from source. I compiled the source and libs were installed in
/etc/ganglia/lib64/ganglia/
I used the command: ./configure --prefix=/etc/ganglia --with-gmetad
--sysconfdir=/etc/ganglia make make install , and everything went fine.
Ichanged the GMOND in gmond/gmond.init to GMOND=/etc/ganglia/sbin/gmond, and
changed GMETAD in gmetad/gmetad.init to GMETAD=/etc/ganglia/sbin/gmetad
1. I have copied the gmond/gmond.init from the build directory to
/etc/rc.d/init.d/gmond and when I start gmond using the command
/etc/rc.d/init.d/gmond start
I get the following error.
.: 9: Can't open /etc/rc.d/init.d/functions
Also I copied gmetad/gmetad.init to /etc/rc.d/init.d/gmetad and starting it
also fails with the above error. What is expected for
/etc/rc.d/init.d/functions ? by these scripts.
When I try something like gmond -d 1 to start the gmond in foreground it
gives
a message that :
[PYTHON] Can't open the python module path
/etc/ganglia/lib64/ganglia/python_modules. Module python_module failed to
initialize.
2. Also I am running an EC2 instance, so while making the changes in the conf
files,
In the gmetad.conf I made foll changes:
a. data_source MyCluster 'internalIP of the instance' ( or should I add
external IP of the instance?)
b. What should I set for User gmetad will setuid to (defaults to
nobody). My rrd directory is at /var/lib/ganglia/rrds and is owned by
root.So
should I set the user here as root?
In the gmond.conf I have the foll:
cluster {
name = MyCluster
owner = MyOwner
latlong = unspecified
url = unspecified}
host { location = unspecified}(again what should go in here???)
udp_send_channel {
mcast_join = 239.2.11.71
port = 8649
ttl = 1}
udp_recv_channel {
mcast_join = 239.2.11.71
port = 8649
bind = 239.2.11.71}
tcp_accept_channel {
port = 8649}
All other conf paremeters are unchanged.
Please help me with this.
Thanks,
Mike
--
Increase Visibility of Your 3D Game App Earn a Chance To Win $500!
Tap into the largest installed PC base get more eyes on your game by
optimizing for Intel(R) Graphics Technology. Get started today with the
Intel(R) Software Partner Program. Five $500 cash prizes are up for grabs.
http://p.sf.net/sfu/intelisp-dev2dev___
Ganglia-general mailing list
Ganglia-general@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ganglia-general
[Ganglia-general] Ganglia Installation issues!URGENT!!
Hi all,
I am trying to get Ganglia run on Ubuntu instance. I built the version
3.1.7
from source. I compiled the source and libs were installed in
/etc/ganglia/lib64/ganglia/
I used the command: ./configure --prefix=/etc/ganglia --with-gmetad
--sysconfdir=/etc/ganglia make make install , and everything went fine.
Ichanged the GMOND in gmond/gmond.init to GMOND=/etc/ganglia/sbin/gmond, and
changed GMETAD in gmetad/gmetad.init to GMETAD=/etc/ganglia/sbin/gmetad
1. I have copied the gmond/gmond.init from the build directory to
/etc/rc.d/init.d/gmond and when I start gmond using the command
/etc/rc.d/init.d/gmond start
I get the following error.
.: 9: Can't open /etc/rc.d/init.d/functions
Also I copied gmetad/gmetad.init to /etc/rc.d/init.d/gmetad and starting it
also fails with the above error. What is expected for
/etc/rc.d/init.d/functions ? by these scripts.
When I try something like gmond -d 1 to start the gmond in foreground it
gives
a message that :
[PYTHON] Can't open the python module path
/etc/ganglia/lib64/ganglia/python_modules. Module python_module failed to
initialize.
2. Also I am running an EC2 instance, so while making the changes in the conf
files,
In the gmetad.conf I made foll changes:
a. data_source MyCluster 'internalIP of the instance' ( or should I add
external IP of the instance?)
b. What should I set for User gmetad will setuid to (defaults to
nobody). My rrd directory is at /var/lib/ganglia/rrds and is owned by
root.So
should I set the user here as root?
In the gmond.conf I have the foll:
cluster {
name = MyCluster
owner = MyOwner
latlong = unspecified
url = unspecified}
host { location = unspecified}(again what should go in here???)
udp_send_channel {
mcast_join = 239.2.11.71
port = 8649
ttl = 1}
udp_recv_channel {
mcast_join = 239.2.11.71
port = 8649
bind = 239.2.11.71}
tcp_accept_channel {
port = 8649}
All other conf paremeters are unchanged.
Please help me with this.
Thanks,
Mike
--
Increase Visibility of Your 3D Game App Earn a Chance To Win $500!
Tap into the largest installed PC base get more eyes on your game by
optimizing for Intel(R) Graphics Technology. Get started today with the
Intel(R) Software Partner Program. Five $500 cash prizes are up for grabs.
http://p.sf.net/sfu/intelisp-dev2dev___
Ganglia-general mailing list
Ganglia-general@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ganglia-general
Re: [Ganglia-general] ganglia installation
Thanks much Bernard. I shall try from scratch installing the latest version and get back to you if I am stuck. From: Bernard Li bern...@vanhpc.org To: Mike nano_kol...@yahoo.com Cc: Ganglia ganglia-general@lists.sourceforge.net Sent: Thu, October 14, 2010 7:23:36 PM Subject: Re: [Ganglia-general] ganglia installation Hi Mike: When responding, please make sure you reply-all so that replies are sent back to the list. This ensures that our discussions are archived for future users encountering the same issue, thanks! On Mon, Oct 11, 2010 at 2:53 PM, Mike nano_kol...@yahoo.com wrote: Thanks much for your response. I had tried installing the version 3.1 before but it didnt help.My instance is x86_64 and the ganglia README.txt says that Ganglia runs on Linux- i386, ia64, sparc, alpha, powerpc, m68k, mips,arm, hppa, s390t? So I was skeptical about that. Sorry I am new to Thanks for pointing that out. I have recently fixed this in our development branch (trunk) but forgot to backport it to our 3.0 and 3.1 trees. I've just merged the changes to the 3.1 tree so the documentation will be updated in the next 3.1 release: https://sourceforge.net/apps/trac/ganglia/changeset/2349 hadoop/ganglia and it would be really helpful if you can send me some tutorials where I can get the step by step process of installation. Installing Ganglia under EC2 is no different from any other environments, so any guide should suffice, for example this one: http://www.jansipke.nl/installing-ganglia-on-centos EC2-specific gotchas are mentioned here: http://www.cultofgary.com/2008/10/16/ec2-and-ganglia/ I have added a link to this page in our Wiki page as well: https://sourceforge.net/apps/trac/ganglia/wiki/ganglia_configuration Also my EC2 instance is not under any cluster name. So does it make sense to put some cluster name in gmetad.conf? Or the cluster name I put in here is independent of all those? It's mostly for your reference. What ends up being shown on the frontend is actually Cluster from gmond.conf. Also I installed ganglia-web RPM as: wget -c http://downloads.sourceforge.net/ganglia/ganglia-web-3.1.0-1.el4.noarch.rpm rpm -ivh ganglia-gmetad-3.1.0-1.el4.i386.rpm ganglia-web-3.1.0-1.el4.noarch.rp I can't remember if ganglia-web 3.1 is compatible with gmetad/gmond 2.5, but regardless, I think if you're just starting out, you should use 3.1.7 across the board. Also make sure that you have started apache/httpd so that it will start serving pages of the frontend. How do I check the apache error_logs? That is usually in /var/log/httpd. Cheers, Bernard -- Download new Adobe(R) Flash(R) Builder(TM) 4 The new Adobe(R) Flex(R) 4 and Flash(R) Builder(TM) 4 (formerly Flex(R) Builder(TM)) enable the development of rich applications that run across multiple browsers and platforms. Download your free trials today! http://p.sf.net/sfu/adobe-dev2dev___ Ganglia-general mailing list Ganglia-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ganglia-general
Re: [Ganglia-general] ganglia installation
Hi Mike: When responding, please make sure you reply-all so that replies are sent back to the list. This ensures that our discussions are archived for future users encountering the same issue, thanks! On Mon, Oct 11, 2010 at 2:53 PM, Mike nano_kol...@yahoo.com wrote: Thanks much for your response. I had tried installing the version 3.1 before but it didnt help.My instance is x86_64 and the ganglia README.txt says that Ganglia runs on Linux- i386, ia64, sparc, alpha, powerpc, m68k, mips,arm, hppa, s390t? So I was skeptical about that. Sorry I am new to Thanks for pointing that out. I have recently fixed this in our development branch (trunk) but forgot to backport it to our 3.0 and 3.1 trees. I've just merged the changes to the 3.1 tree so the documentation will be updated in the next 3.1 release: https://sourceforge.net/apps/trac/ganglia/changeset/2349 hadoop/ganglia and it would be really helpful if you can send me some tutorials where I can get the step by step process of installation. Installing Ganglia under EC2 is no different from any other environments, so any guide should suffice, for example this one: http://www.jansipke.nl/installing-ganglia-on-centos EC2-specific gotchas are mentioned here: http://www.cultofgary.com/2008/10/16/ec2-and-ganglia/ I have added a link to this page in our Wiki page as well: https://sourceforge.net/apps/trac/ganglia/wiki/ganglia_configuration Also my EC2 instance is not under any cluster name. So does it make sense to put some cluster name in gmetad.conf? Or the cluster name I put in here is independent of all those? It's mostly for your reference. What ends up being shown on the frontend is actually Cluster from gmond.conf. Also I installed ganglia-web RPM as: wget -c http://downloads.sourceforge.net/ganglia/ganglia-web-3.1.0-1.el4.noarch.rpm rpm -ivh ganglia-gmetad-3.1.0-1.el4.i386.rpm ganglia-web-3.1.0-1.el4.noarch.rp I can't remember if ganglia-web 3.1 is compatible with gmetad/gmond 2.5, but regardless, I think if you're just starting out, you should use 3.1.7 across the board. Also make sure that you have started apache/httpd so that it will start serving pages of the frontend. How do I check the apache error_logs? That is usually in /var/log/httpd. Cheers, Bernard -- Download new Adobe(R) Flash(R) Builder(TM) 4 The new Adobe(R) Flex(R) 4 and Flash(R) Builder(TM) 4 (formerly Flex(R) Builder(TM)) enable the development of rich applications that run across multiple browsers and platforms. Download your free trials today! http://p.sf.net/sfu/adobe-dev2dev ___ Ganglia-general mailing list Ganglia-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ganglia-general
Re: [Ganglia-general] ganglia installation
Hi Michael: On Sun, Oct 10, 2010 at 8:01 PM, Mike nano_kol...@yahoo.com wrote: I am trying to install ganglia in a single EC2 instance (Fedora x86_64 GNU/Linux).I want to use ganglia to monitor hadoop performance. Hadoop installation is successful. I installed everything for ganglia(2.5.7) following the steps in the link in this same instance http://wiki.appnexus.com/display/documentation/Monitoring+Instances+Using+Ganglia If you are starting from scratch, I would recommend you use the latest version of Ganglia (3.1.7). 2.5.7 is really old and should be avoided unless you need it for specific reasons. but using x86_64 rpms instead of i386. I havent changed anything in gmetad.conf except for adding this: data_source unspecified localhost. You probably want to use a more descriptive name for your cluster than unspecified. I have the gmond.conf with all the default values, I have modified nothing in it. I also set hadoop-metrics.properties as explained in http://developer.yahoo.com/hadoop/tutorial/module7.html#ganglia with mapred.servers,dfs.servers,jvm.servers as localhost:8649 When I view the page http://hostnameofEC2instance/ganglia. It doesn't display anything, it waits for sometime and says page cannot be displayed as it takes long time to respond. I am able to start gmond,gmetad etc(service gmetad start). and can do telnet localhost 8649 to display the XML. Also when going on gmond --debug=9/gmetad --debug=9 it goes on displaying some messages. Have you installed the ganglia-web RPM and started apache? If so, can you get at your apache error_logs and see if there is something wrong? Cheers, Bernard -- Beautiful is writing same markup. Internet Explorer 9 supports standards for HTML5, CSS3, SVG 1.1, ECMAScript5, and DOM L2 L3. Spend less time writing and rewriting code and more time creating great experiences on the web. Be a part of the beta today. http://p.sf.net/sfu/beautyoftheweb ___ Ganglia-general mailing list Ganglia-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ganglia-general
[Ganglia-general] ganglia installation
Hi all, I am trying to install ganglia in a single EC2 instance (Fedora x86_64 GNU/Linux).I want to use ganglia to monitor hadoop performance. Hadoop installation is successful. I installed everything for ganglia(2.5.7) following the steps in the link in this same instance http://wiki.appnexus.com/display/documentation/Monitoring+Instances+Using+Ganglia but using x86_64 rpms instead of i386. I havent changed anything in gmetad.conf except for adding this: data_source unspecified localhost. I have the gmond.conf with all the default values, I have modified nothing in it. I also set hadoop-metrics.properties as explained in http://developer.yahoo.com/hadoop/tutorial/module7.html#ganglia with mapred.servers,dfs.servers,jvm.servers as localhost:8649 When I view the page http://hostnameofEC2instance/ganglia. It doesn't display anything, it waits for sometime and says page cannot be displayed as it takes long time to respond. I am able to start gmond,gmetad etc(service gmetad start). and can do telnet localhost 8649 to display the XML. Also when going on gmond --debug=9/gmetad --debug=9 it goes on displaying some messages. Can anyone help me with this,if I am going wrong somewhere? Thanks, Michael -- Beautiful is writing same markup. Internet Explorer 9 supports standards for HTML5, CSS3, SVG 1.1, ECMAScript5, and DOM L2 L3. Spend less time writing and rewriting code and more time creating great experiences on the web. Be a part of the beta today. http://p.sf.net/sfu/beautyoftheweb___ Ganglia-general mailing list Ganglia-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ganglia-general
[Ganglia-general] Ganglia installation problem
Hi, I tried to install ganglia on my AIX machine.. All my installations are under my home directory /home2/globus/XXX I installed the RRDTOOLS am having the librrd.a rrd.h files.. I'm running the whole installation as a different user (globus) not as ROOT. When I do the ./configure --with-gmetad --disable-shared --enable-static it does all the steps and then breaks saying : checking for rrd_create in -lrrd ... no you have chosen to compile the monitoring core with gmetad but librrd.a couldn't be found I tried to put these files in /usr/local, /usr/include also.. but still getting the same errors.. Could anyone please help.. Thx.. Regards, Krishna -- __ Sign-up for your own FREE Personalized E-mail at Mail.com http://www.mail.com/?sr=signup
Re: [Ganglia-general] Ganglia installation problem
you can change where the ./configure script looks for include files and libraries (if they are in non-standard locations). this is a general autconf trick which might be helpful compiling other packages too. % CFLAGS=-I/home2/globus/XXX/include \ CPPFLAGS=-I/home2/globus/XXX/include \ LDFLAGS=-L/home2/globus/XXX/lib \ ./configure --with-gmetad should do the trick (or something close to this). good luck. let us know if you have any more problems. -- matt Today, Krishna Kumar wrote forth saying... Hi, I tried to install ganglia on my AIX machine.. All my installations are under my home directory /home2/globus/XXX I installed the RRDTOOLS am having the librrd.a rrd.h files.. I'm running the whole installation as a different user (globus) not as ROOT. When I do the ./configure --with-gmetad --disable-shared --enable-static it does all the steps and then breaks saying : checking for rrd_create in -lrrd ... no you have chosen to compile the monitoring core with gmetad but librrd.a couldn't be found I tried to put these files in /usr/local, /usr/include also.. but still getting the same errors.. Could anyone please help.. Thx.. Regards, Krishna
[Ganglia-general] Ganglia Installation
Hello Matt; I am install the Ganglia Cluster in my company for test, and I have any questions about installation the Ganglia. My configuration: - S.O: Linux RedHat 7.2 - Master: (eth0) 172.16.10.103 - 255.255.255.0 (eth1) 10.4.8.1 - 255.255.255.0 - Node01: (eth1) 10.4.8.1 - 255.255.255.0 1 - When I configuration the Apache I use the (eth0) our (eth1) in master ? 2 - I have one node, have any problem ? 3 - When I start the ganglia in browser the don`t show the pictures (.gif) the hosts ? 4 - My gmond.conf is correct ? [EMAIL PROTECTED] etc]# more /etc/gmond.conf # This is the configuration file for the Ganglia Monitor Daemon (gmond) # Documentation can be found at http://ganglia.sourceforge.net/docs/ # # To change a value from it's default simply uncomment the line # and alter the value # # # The name of the cluster this node is a part of # default: unspecified name CIMCORP - Lab. Cluster # # The multicast channel for gmond to send/receive data on. i # NOTE: Must be in the multicast range from 224.0.0.0-239.255.255.255 # default: 239.2.11.71 mcast_channel 239.2.11.71 # # The multicast port for gmond to send/receive data on # default: 8649 mcast_port8649 # # The multicast interface for gmond to send/receive data on # default: the kernel decides based on routing configuration mcast_if eth1 # # The multicast Time-To-Live (TTL) for outgoing messages # default: 1 mcast_ttl 1 # # The number of threads listening to multicast traffic # default: 2 mcast_threads 2 # # Which port should gmond listen for XML requests on # default: 8649 xml_port 8649 # # The number of threads answering XML requests # default: 2 xml_threads 2 # # Hosts ASIDE from 127.0.0.1/localhost and those multicasting # on the same multicast channel which you will share your XML # data with. Multiple hosts are allowed on multiple lines. # default: none trusted_hosts nome # # The number of nodes in your cluster. This value is used in the # creation of the cluster hash. # default: 1024 num_nodes 1 # # The number of custom metrics this gmond will be storing. This # value is used in the creation of the host custom_metrics hash. # default: 16 num_custom_metrics 16 # # Run gmond in mute mode. Gmond will only listen to the multicast # channel but will not send any data on the channel. # default: off mute off # # Run gmond in deaf mode. Gmond will only send data on the multicast # channel but will not listen/store any data from the channel. # default: off deaf off # # Run gmond in debug mode. Gmond will not background. Debug messages # are sent to stdout. Value from 0-100. The higher the number the more # detailed debugging information will be sent. # default: 0 debug_level 0 # # If you don't want gmond to setuid, set this to on # default: off no_setuid off # # Which user should gmond run as? # default: nobody setuid nobody # # If you do not want this host to appear in the gexec host list, set # this value to on # default: off no_gexec off # # If you want any host which connects to the gmond XML to receive # data, then set this value to on # default: off all_trusted off Thank you very much; -- Evaldo Bezerra da Costa Analista de Suporte - Unix Adm. CIMCORP Com. Int. e Info. S.A. Rua Lauro Muller, 116 / Sala 906 Botafogo - 22290-160 - RJ - Brasil Tel./Fax: +55 21 2543-1206 Celular: +55 21 7893-4310 URL: www.cimcorp.com.br
