?
HOSTEXCLUDE
I could find no such commands in the manual however I am sure that you must
have allowed for this.
See http://www.analog.cx/docs/include.html
--
Jeremy Wadsack
Wadsack-Allen Digital Group
#faq128 for a
discussion (it's the same issue described there).
3. Lastly, is there any way to decide the order of the actual
reports?
Use the REPORTORDER command,
http://www.analog.cx/docs/output.html#REPORTORDER.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
other helper
apps?
http://www.analog.cx/helpers/
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|http://lists.isite.net/listgate
the commands, then maybe
I can teach myself a bit more but even this basic point is baffling me.
Thank you towhoever can help me; I'm sure it's a doddle once you know how.
REQFLOOR 10r
See http://www.analog.cx/docs/othreps.html#FLOOR for details.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
with different settings
for each one. There are some examples of setting up Analog for virtual
hosts in the documentation HOWTO pages.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list
to tell Analog to only report on
failures since a particular data. See
http://www.analog.cx/docs/othreps.html#FLOOR for details.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list
guessing that you wanted to do the
previous.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|http://lists.isite.net/listgate/analog
are the same page, with different combinations
of arguments. You have told Analog (REQARGSFLOOR) to include to top 40
entries for arguments for each request. If you don't want it to show
request arguments you can turn them off with ARGSEXCLUDE *.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
EXCLUDE, INCLUDE or ALIAS commands to the configuration
file since the original run?
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go
the possible arguments.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|http://lists.isite.net/listgate/analog-help/unsubscribe.html
of distinct user
sessions. Read http://www.analog.cx/docs/webworks.html as to why
that's not easily counted and why Analog does not do it.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list
reports. See
http://www.analog.cx/docs/othreps.html#FLOOR for details.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|http
report. You can't have two FLOOR requirements for a report.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|http
report run with that set of
data.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|http://lists.isite.net/listgate/analog-help
You need all three to support all possible HTTP protocols. If all your
requests are HTTP/1.0 or HTTP/1.1 then you only need the first one.
The final %j tells Analog to ignore everything until the new line.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
[EMAIL PROTECTED] ([EMAIL PROTECTED
with some Unix tools, but not with Analog.
Analog does have memory control configuration commands through:
http://www.analog.cx/docs/lowmem.html.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help
/docs/logfmt.html.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|http://lists.isite.net/listgate/analog-help/unsubscribe.html
Win2000.
Use a *CHARTEXPAND command,
http://www.analog.cx/docs/hierreps.html#CHARTEXPAND. You will need to
be running Analog 5.2 or later.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing
Stephen Turner ([EMAIL PROTECTED]):
On Wed, 27 Mar 2002, Jeremy Wadsack wrote:
I re-downloaded the source tar and replaced my anlgform.pl. Again, I'm
confused because it works on the linux command line, but not in my web
browser.
For security, the web interface does not support
either of these.
You may need to pre-process it to add these fields.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|http
, it's possible that Solaris's date command doesn't support the
relative dates or formats in the same way. Check 'man date' for
details.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
SUSANA PUMAR PAVON ([EMAIL PROTECTED]):
I tried to run Analog with your shell script but unfortunately it
doesn't
://www.analog.cx/docs/othreps.html#FLOOR
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|http://lists.isite.net/listgate/analog-help
, it's not that much work.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
SUSANA PUMAR PAVON ([EMAIL PROTECTED]):
I'm running Analog on Solaris 2.6. I think that is the problem. I don´t
know how to treat the relative dates. I´ve looked it up with the command
'man date' but it didn't help me
(inclusive) bytes, use something like this:
[2345]00
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|http://lists.isite.net
in your log format
you can get cookied information for all requests. If cookies are
handled by your server, then they should be sent for graphics requests
too.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
[EMAIL PROTECTED] ([EMAIL PROTECTED]):
Okay, let me put it this way:
I'm interested
Aengus ([EMAIL PROTECTED]):
Jeremy Wadsack [EMAIL PROTECTED] wrote:
Aengus ([EMAIL PROTECTED]):
I think your best bet will be to grep the logs for matching
requests. Does anyone know how to create a regular expression
to pick out lines with a field that is between 2 numerical values
already done this, as you would have needed to
in your original format anyway.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
[EMAIL PROTECTED] ([EMAIL PROTECTED]):
Sorry, I wasn't clear. It gives the total number of _all_ cookies - what I
need is the total number of the cookies individually
/iobox.com/access.log-`date +%Y-%m-%d -d '-4 days'` \
/log/http/iobox.com/access.log-`date +%Y-%m-%d -d '-5 days'` \
/log/http/iobox.com/access.log-`date +%Y-%m-%d -d '-6 days'`
--
Jeremy Wadsack
Wadsack-Allen Digital Group
Chris,
This would appear to be an error in your shell script. As you didn't
include the script I can't give you any suggestions on it but it
appears you have a '[' where bash does not want it.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
Chris McQuade ([EMAIL PROTECTED]):
Hi all. I am
(%f.)
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|http://lists.isite.net/listgate/analog-help/unsubscribe.html
|
| List
to change size floors? I can't see
it at http://www.analog.cx/docs/Readme.html...
What would such a FLOOR command effect? The histogram shows the
distribution of files by size. I'm not sure why you would not want to
include all buckets in that report.
--
Jeremy Wadsack
Wadsack-Allen Digital
in HTML pages to be run on the client.
http://developer.netscape.com/js/
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|http
a
new report for every month.
Analog does not support %y%M in log file statement. You can specify
the log file on the command line. You may be able to write a batch
file to automate this. Check the list archives for examples.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
for the User (and VHost) reports to
something very large to get all the values totaled in the [not listed]
section. In your report above USERFLOOR 2000r would do the trick.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
Isn't that what you want to do? Count the total number of unique
cookies for the period or log files?
--
Jeremy Wadsack
Wadsack-Allen Digital Group
[EMAIL PROTECTED] ([EMAIL PROTECTED]):
I thought something like this would be the solution - but I can't seem to
get it to work. I've made
, then run the appropriate Analog reports.
Any thoughts on this?
http://www.analog.cx/docs/faq.html#faq181
If you are ok with the potential double counting on directories, then
your sed approach is probably the best.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
Did you read the FAQ item that I linked to? That's the double counting
I'm talking about.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
Michael Rabe ([EMAIL PROTECTED]):
Thanks for the feedback - could you elaborate on the double counting?
What is that potential? A lot of the redirects
, then
use this:
REQEXCLUDE *.gif,*.jpg,*.css,*.js
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|http://lists.isite.net
really get that
number. See http://www.analog.cx/docs/webworks.html for reasons why.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go
on the Helper Applications page,
http://www.analog.cx/helpers/;
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|http://lists.isite.net
format. You probably want HTML for your
browser to read it. Change your Analog configuration file to OUTPUT
HTML (or remove the OUTPUT COMPUTER line) or add that directive to
your form.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
the parsers
for the other formats. :o)
Analog does not have any templating built into it, just the predefined
output formats. There is a tool on the Helper Applications page
(http://www.analog.cx/helpers/) called anaml that converts CRO to XML.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
@lists.isite.net/msg10869.html
http://www.mail-archive.com/analog-help@lists.isite.net/msg10466.html
and a vested interest in this discussion:
http://www.reportmagic.org/
If you choose to take this discussion off the list, can you please
include me in it?
Thanks,
--
Jeremy Wadsack
Wadsack-Allen
to the IP or is there a way
to do this within Analog?
I answered this question when you posted it yesterday, Michael:
http://www.mail-archive.com/analog-help@lists.isite.net/msg11243.html
--
Jeremy Wadsack
Wadsack-Allen Digital Group
111.222.333.66
I would like to see it as
S Rr 400 0.35 111.222.333.*
Or move it to even a higher level at 111.222.*
Is there a way to specify this in the config file.
The Organisation Report does this in version 5 and later.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
is generated.
No, they are calculated metrics, and can be easily determined from the
other values in the General Summary.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from
. It would be nice to have this generated
by analog, but I guess I can just make my wrapper script insert those
average values to analog computer-readable report before it calls
RMagic.
This has become a FAQ for Report Magic so it will be added in a
forthcoming version.
--
Jeremy Wadsack
Wadsack
/alias.html for details on the ORGALIAS
command.
Report Magic will pass through whatever information Analog tells it.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from
, etc (depending on
columns selected) that the user has. If your log file does not have
users (your website does not require logins) then you will have no
data in the report and Analog won't generate it.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
doing this. It's just a warning (not an error) in
case you expect the log files to not overlap. You can use the WARNINGS
command in your Analog configuration file to disable this message.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
, but no report either!
That's what SETTINGS ON is supposed to do.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|http
a RM problem and should go to the reportmagic-help mailing
list.
This was posted to both lists. I responded to the reportmagic-help
list. An upgrade to the latest version fixes this.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
is correct if most of the lines in your file are not corrupt.
One of your INCLUDE or EXCLUDE commands must be filtering all those
entries.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list
by a single given user at a time, using
USERINCLUDE command.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|http://lists.isite.net
called 'user' to record all users. Could you please let me
know what else might have to be done or inform me of any mistakes I might be
Also check the USERFLOOR settings to make sure that all the users
aren't bundled into [not listed] (unless that's what you want).
--
Jeremy Wadsack
Wadsack-Allen
all to the same folder?
Then it will overwrite the image files each time it runs and you will
be left with the last images created (likely one of the
subdirectories). If you are creating several reports with separate
images, you should put them into their own directories.
--
Jeremy Wadsack
, I think it would be more efficient to use grep or some
other tool to collect all the request from a given host and look at
them manually. It's possible that you could code up a script in Perl
to perform this kind of logic, preprocessing the files before you have
Analog analyze them.
--
Jeremy
of 'redirection' in Analog.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|http://lists.isite.net/listgate/analog-help
the REQEXCLUDE command to remove items from the Request Report.
This is covered in http://www.analog.cx/docs/include.html.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe
://www.analog.cx/docs/include.html
Also, you might want to use the Browser Summary, rather than the
Browser Report.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from
all lines from the log file in the
report. If you have excluded lines from that server, just add a
VHOSTINCLUDE line to get them back.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list
or from the command line then you need to use the
DEFAULTAPACHELOGFORMAT command with the format string above.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from
.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|http://lists.isite.net/listgate/analog-help/unsubscribe.html
|
| List archives
\t%j\t%b\t%T\t%j\t%j\t%r\t%j\t%c
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|http://lists.isite.net/listgate/analog-help
Analog report about what it's doing, which may give insight
about which files it's trying to load.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing
, ... each broken down into version and
subversion).
[Stephen.. isn't this becoming a FAQ?]
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go
in the
documentation (http://www.analog.cx/docs/logfmt.html) to build your
own LOGFORMAT string.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go
. Start with the Readme.html file. Or you
can get them from the websites here:
http://www.analog.cx/docs/Readme.html. In particular, look at the
'Starting to use analog' page and select a start page for your
platform.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
?OpenViewExpand=3
look this this in the reports
/intranet/gcm/main/gcmprd1.ns4/va_AllSubCat1.OpenView?Expand=3
You can probably use a REQALIAS to convert them back for the Request
Report if you want.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
in the report (but not those excluded or below the
floor.)
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|http://lists.isite.net/listgate
was corrupt.
Also, Analog doesn't analyze the error log from Apache. It has mainly
human-readable information and all of it is duplicated in the access
logs in status codes. (This is in the FAQ)
If you take out the error log, that may remove a lot of your corrupt
line messages.
--
Jeremy Wadsack
settings are for the browser reports.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|http://lists.isite.net/listgate/analog-help
files don't contain status codes, so Analog can't process
them. You should edit your apache configuration to change the logfile
format. Apache comes with a predefined format called 'Combined' that
Analog can process automatically.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
were so inclined to write it. :-)
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|http://lists.isite.net/listgate/analog-help
Ana Paula ([EMAIL PROTECTED]):
What can I do for enable statistics to get users browsers details
(like: netscape 5%, Internet Explorer 33%, etc) ???
I'm using Analog 5.1-1 and Report Magic 2.12 .
Turn on the Browser Summary in your Analog config:
BROWSERSUM ON
--
Jeremy Wadsack
way to do this is with Analog cache files
(http://www.analog.cx/docs/cache.html). This is mentioned in the
documentation on COMPUTER output and in the faq:
http://www.analog.cx/docs/faq.html#faq157.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
know the specific, but I'm fairly certain there's a way of
creating a command prompt that will run Analog on the current week's
log files.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list
.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|http://lists.isite.net/listgate/analog-help/unsubscribe.html
|
| List archives
way to remedy this?
Use the second argument to the log file command. See
http://www.analog.cx/docs/logfile.html.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from
to the same thing. If you want to change the way it
looks in the Request Report, use REQALIAS, which doesn't affect the
link.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe
[EMAIL PROTECTED] ([EMAIL PROTECTED]):
Hello,
On Thu, 10 January 2002, Jeremy Wadsack wrote:
Otis Gospodnetic ([EMAIL PROTECTED]):
I am trying to figure out why Analog is reporting less requests than
there really are.
I think it is caused by some *REF*EXCLUDE commands.
We
, it doesn't work that way. You can use REQALIAS to give
each entry the same name, but Analog won't combine them. The only way
to get them counted as the same file is with FILEALIAS.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
from the all the
reports. Is this a correct assumption?
No, only FILEINCLUDE does that. REQINCLUDE is an output alias and
applies only to the Request Report.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
case you
need to use the LOGFILE command to include more logs. See
http://www.analog.cx/docs/logfile.html for details.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe
you think it's reading or something. Also
were there any warning messages produced. You might try turning on all
warnings just in case.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list
to many display formats.
Is there also something documenting how
the computer output works?
Yes, it's fully documented in docs/compout.html.
You might want to look at the anaml tool on the Helper Applications
page that takes computer output and produces and XML file from it.
--
Jeremy
to be and wait for the
next run (if it's scheduled).
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|http://lists.isite.net/listgate
.).
But then, I'm biased about that. :-)
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|http://lists.isite.net/listgate/analog-help
.)
Or add a solution! :-) You could add a *CHARTLEVEL command or
something that tells Analog to CHART a level other than the first one
in hierarchical reports.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
memory (it's cheap) or consider
breaking up reports (e.g. only offer monthly reports, or only look at
subsections of the data).
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list
at the page from the
view source and/or bookmarks.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|http://lists.isite.net/listgate
handle large files better in some situations.
So as not to advertise, I won't mention commercial packages on the
list, but contact me personally if you want any recommendations.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
Applications page that might help with
this. There probably isn't any way to write a LOGFORMAT to overcome
this -- you'll need to pre-process the logs in order to make them
proper.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
, you could start with these...
http://www.analog.cx/docs/Readme.html
http://www.analog.cx/how-to/index.html
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from
.
Then use the USERINCLUDE line to select which 'users' you want to
filter the report by. See http://www.analog.cx/docs/include.html.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list
DEFAULTLOGFORMAT (%Y-%m-%d %h:%n:%j %S %j %j %j %j %j %j %r %q %c %b %j %T %j %j %j %A
%u %f)
--
Jeremy Wadsack
Wadsack-Allen Digital Group
Harshu Kanitkar ([EMAIL PROTECTED]):
Hello,
Thanks for your help. According to the info you gave me, i came up with this:
LOGFORMAT (%Y-%m-%d
with the current anlgform.exe build. You might try downloading
the file again. If that doesn't fix it, let me know and I'll rebuild
it.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list
If you split it into files that are smaller than 2GB and still have
the problem, then it's not the 2GB file limit problem. As Andrew
suggested, take a look at 'top' while it's running and see if it's
thrashing the hard drive. It could just need more memory for
processing.
--
Jeremy Wadsack
.
This looks like you are using Report Magic so the reportmagic-help
mailing list (http://www.reportmagic.org/lists.html) would be a better
venue.
The rounding of requests and pages is a known issue due to be fixed in
the next release.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
it secure.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|http://lists.isite.net/listgate/analog-help/unsubscribe.html
|
| List archives
1 - 100 of 1065 matches
Mail list logo
