ut could just pull the
> > lever. Aside from the problem in (1), you could, of course, set the stop
> > to make a large drill create a small diameter centre. Which makes CNC
> > an obvious advantage, of course.
> >
> > Marcus
> >
> >
> > _
ith stops.
> The operator then would not need to think, but could just pull the
> lever. Aside from the problem in (1), you could, of course, set the stop
> to make a large drill create a small diameter centre. Which makes CNC
> an obvious advantage, of course.
>
> Marcus
>
it. and if an SD card dies, nothing is lost.
I never have to backup an SD card.
Interesting concept. When I get time to concentrate on it. I'll probably
pester you for details. Thanks Chris.
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https
t order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/
, of course, set the stop
to make a large drill create a small diameter centre. Which makes CNC
an obvious advantage, of course.
Marcus
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
On Fri, 10 May 2024, John Dammeyer wrote:
Date: Fri, 10 May 2024 18:26:21 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] Mesa Card Stepgens?
What type of output driver is us
cycle with a pandemonium attachment and is designed
for the especial use of mechanical geniuses, daredevils and lunatics."
— George Fitch, Atlanta Constitution Newspaper, 1912
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge
What type of output driver is used on the 7i84?
John
> -Original Message-
> From: Peter Wallace [mailto:p...@mesanet.com]
> Sent: May 10, 2024 1:54 PM
> To: Todd Zuercher
> Cc: Todd Zuercher via Emc-users
> Subject: Re: [Emc-users] Mesa Card Stepgens?
>
> O
ans the data is always available on my other computers.
I never have to move it. and if an SD card dies, nothing is lost.
I never have to backup an SD card.
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
by this?
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Peter Wallace
Sent: Monday, April 15, 2024 5:09 PM
To: Todd Zuercher
Cc: Todd Zuercher via Emc-users
Subject: RE: [Emc-users] Mesa Card Stepgens?
[EXTERNAL
On Fri, 10 May 2024, Todd Zuercher wrote:
Date: Fri, 10 May 2024 20:40:53 +
From: Todd Zuercher
To: Peter Wallace
Cc: Todd Zuercher via Emc-users
Subject: RE: [Emc-users] Mesa Card Stepgens?
Peter,
I've ran into another bit of a snag. I have a couple of 24v relays from
, 2024 3:31 PM
To: Todd Zuercher
Cc: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Global Named Parameter?
[EXTERNAL EMAIL] Be sure links are safe.
On 10 May 2024, at 19:55, Todd Zuercher
mailto:to...@pgrahamdunn.com>> wrote:
Is there a way to bring out a tool offset
Inc.<http://www.pgrahamdunn.com/index.php>
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
From: andy pugh
Sent: Thursday, May 09, 2024 7:33 PM
To: Enhanced Machine Controller (EMC)
Cc: Todd Zuercher
Subject: Re: [Emc-users] Global Named Parameter?
[EXTERNAL EMAIL] Be sur
expert.
>>>
>>> Cheers, Gene Heskett, CET.
>>> --
>>> "There are four boxes to be used in defense of liberty:
>>> soap, ballot, jury, and ammo. Please use in that order."
>>> -Ed Howdershelt (Author, 1940)
>>> If we desire res
Louis D. Brandeis
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.
0)
> If we desire respect for the law, we must first make the law respectable.
> - Louis D. Brandeis
>
>
>
> _______
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
ure someone on here is a expert on it
>
> cheers
>
> andrew
>
> _______
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
Message-
From: Sam Sokolik
Sent: Friday, May 10, 2024 6:50 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] cloning hard drive
[EXTERNAL EMAIL] Be sure links are safe.
2nd clonezilla.. use it all the time at work.
On Fri, May 10, 2024, 5:42 AM Ed wrote:
> On 5/10/24 4:10
__
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
rt on it
> >
> > cheers
> >
> > andrew
>
> Not an expert.
>
> Clonezilla.
>
> The computer that ran my CHNC lathe went down but the drive was OK. Used
> Clonezilla and transferred from a PATA drive to a SATA on a newer
> computer and was back on the air
and was back on the air in about 2 hrs total.
Ed.
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
done it before and i'm sure someone on here is a expert on it
cheers
andrew
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
On Thu, 9 May 2024 at 18:55, Todd Zuercher via Emc-users <
emc-users@lists.sourceforge.net> wrote:
> I would like to create a few persistent global named parameters.
>
Hmmm
You can make numbered parameters persistent simply by adding them to the
.vars file.
So one way wou
into the motion.analog-in-## and motion.analog-out-## HAL pins.
-John
On Thu, May 9, 2024 at 11:50 AM Todd Zuercher via Emc-users <
emc-users@lists.sourceforge.net> wrote:
> I would like to create a few persistent global named parameters. I want
> to be able to set and read the values of thes
for offsetting the joint's
position.
Todd Zuercher
P. Graham Dunn Inc.<http://www.pgrahamdunn.com/index.php>
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
On 5/8/24 13:44, Todd Zuercher via Emc-users wrote:
Gene,
Tell me more about this udev bug.
I'm not so sure this system even has it. If I check the directory
/dev/serial/by-id is there and has one device in it, and it looks like it is
most likely my device. If my system was affected bu
ntain Gid: ( 20/ dialout)
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: zz...@seznam.cz
Sent: Wednesday, May 08, 2024 1:45 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Mb2hal 2.9?
[You d
Bookworm has /dev/ttyUSB "locked"
File icon has red cross
stat /dev/ttyUSB0
Check if it contain:
Gid: ( 20/ dialout)
Then:
sudo usermod -a -G dialout $USER
"-- Původní zpráva --
Od: Todd Zuercher via Emc-users
Datum: 08.05.2024 19:27:15
Předmět: Re: [Emc-us
not be there, or would it not have any devices in it, or would the
device just not work?
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: gene heskett
Sent: Wednesday, May 08, 2024 12:23 PM
To: emc-users@lists.sourceforge.net
is all I needed to do to get this working as it was
before.
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: gene heskett
Sent: Wednesday, May 08, 2024 12:23 PM
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc
On 5/8/24 08:13, Todd Zuercher via Emc-users wrote:
No, they are not. The old pc was running Ubuntu 10.04. (Because that was the
last Linuxcnc distro that seemed work with this old pc and it’s ISA IO card.)
The new PC is running Debian 12 (installed using an ordinary Debian net install
iso
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Todd Zuercher via Emc-users
Sent: Wednesday, May 08, 2024 8:13 AM
To: andy pugh ; Enhanced Machine Controller (EMC)
Cc: Todd Zuercher
Subject: Re: [Emc-users] Mb2hal 2.9?
achine Controller (EMC)
Cc: Todd Zuercher
Subject: Re: [Emc-users] Mb2hal 2.9?
[EXTERNAL EMAIL] Be sure links are safe.
On Wed, 8 May 2024 at 02:15, Todd Zuercher via Emc-users
mailto:emc-users@lists.sourceforge.net>> wrote:
It was already set to 3.
What is your MB2HAL load line?
What doe
On Wed, 8 May 2024 at 02:15, Todd Zuercher via Emc-users <
emc-users@lists.sourceforge.net> wrote:
> It was already set to 3.
What is your MB2HAL load line?
What does lsusb call the dongle?
Are the two PCs in question running the same version of Linux?
--
atp
"A motorcycl
(only in transactions).
INIT_DEBUG=3
Maybe set yours to 3 to get more information?
John
> -Original Message-
> From: Todd Zuercher via Emc-users [mailto:emc-
> us...@lists.sourceforge.net]
> Sent: May 7, 2024 1:29 PM
> To: Peter Wallace; Todd Zuercher via Emc-users
> Cc: Tod
On 5/7/24 16:02, Todd Zuercher via Emc-users wrote:
The machine that I've been working on updating from 2.7 to 2.9 has hit a snag.
The one thing I didn't change now seems to be giving me the most trouble.
The machine has 8 vfds for running 8 router spindles, they are/were connected
.
# 4 = maximum debugging messages (only in transactions).
INIT_DEBUG=3
Maybe set yours to 3 to get more information?
John
> -Original Message-
> From: Todd Zuercher via Emc-users [mailto:emc-
> us...@lists.sourceforge.net]
> Sent: May 7, 2024 1:29 PM
> To: Peter Wallace; To
-Original Message-
From: Peter Wallace
Sent: Tuesday, May 07, 2024 4:16 PM
To: Todd Zuercher via Emc-users
Cc: Todd Zuercher
Subject: Re: [Emc-users] Mb2hal 2.9?
[EXTERNAL EMAIL] Be sure links are safe.
On Tue, 7 May 2024, Todd Zuercher via Emc-users wrote:
> Date: Tue, 7 May 2024 19
On Tue, 7 May 2024, Todd Zuercher via Emc-users wrote:
Date: Tue, 7 May 2024 19:59:55 +
From: Todd Zuercher via Emc-users
To: "Enhanced Machine Controller (EMC)"
Cc: Todd Zuercher
Subject: [Emc-users] Mb2hal 2.9?
The machine that I've been working on updating from 2.7 to 2
in mb2hal between 2.7 and 2.9 that would
require a change to the mb2hal configuration files?
Todd Zuercher
P. Graham Dunn Inc.<http://www.pgrahamdunn.com/index.php>
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
_______
Emc
e of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
_______
Emc-users mailing list
Emc-users@lis
thor, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
s available now.
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
terface modeled after the MACH3 with menu's and
forms to fill out to set things up. The need to drop into custom code (BASIC
in MACH3) should only be for specialized customization. The target needs to be
the small mills that go for under $1500.
John
_____________
matured enough with other solutions like the Centroid
>> ACORN
>> https://www.centroidcnc.com/centroid_diy/acorn_cnc_controller.html
>> and it's pointless to even bother with LinuxCNC?
>> John
>> _______
>> Emc-users mailing lis
, but you would need those anyway.
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is designed
for the especial use of mechanical geniuses, daredevils and lunatics."
— George Fitch, Atlanta Constitution Newspaper, 1912
_______
it's pointless to even bother with LinuxCNC?
John
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
.
Cheers, Gene Heskett, CET.
--
"There are four boxes to be used in defense o
George Fitch, Atlanta Constitution Newspaper, 1912
___________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
edevils and lunatics."
> — George Fitch, Atlanta Constitution Newspaper, 1912
>
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
, 2024 12:25 PM
To: Enhanced Machine Controller (EMC)
Subject: [Emc-users] BeagleY-AI
[EXTERNAL EMAIL] Be sure links are safe.
Apparently available in June it looks like this version of the Beagle may well
be a good successor to the original Beagle and MachineKit.
https://www.mouser.ca/new
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
YU?feature=shared=42
>
> > Tomaz,
> > I watched the video. Even at .25 speed I could not see the axis movement
> of
> > the head/head. I would like to see the head/head moving.
>
> > Do you sometimes run with the A axis rotary table unhooked from the
>
ium attachment and is designed
for the especial use of mechanical geniuses, daredevils and lunatics."
— George Fitch, Atlanta Constitution Newspaper, 1912
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
A motorcycle is a bicycle with a pandemonium attachment and is designed
for the especial use of mechanical geniuses, daredevils and lunatics."
— George Fitch, Atlanta Constitution Newspaper, 1912
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
iuses, daredevils and
> lunatics."
> — George Fitch, Atlanta Constitution Newspaper, 1912
>
>
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
.be/g2MSzw1MhYU?feature=shared=42
> Tomaz,
> I watched the video. Even at .25 speed I could not see the axis movement of
> the head/head. I would like to see the head/head moving.
> Do you sometimes run with the A axis rotary table unhooked from the control?
_______
100 and the other M101, then you
> should get what you want.
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
ot; axis.
>
> > How are the two machines configured?
> > Do you have XYZAB and XYZAC?
>
>
>
> _______
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
stitution Newspaper, 1912
___________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
is.
> How are the two machines configured?
> Do you have XYZAB and XYZAC?
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
with a pandemonium attachment and is designed
> for the especial use of mechanical geniuses, daredevils and lunatics."
> — George Fitch, Atlanta Constitution Newspaper, 1912
>
> ___
> Emc-users mailing list
> Emc-users@lists
um attachment and is designed
for the especial use of mechanical geniuses, daredevils and lunatics."
— George Fitch, Atlanta Constitution Newspaper, 1912
_______________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
ycle is a bicycle with a pandemonium attachment and is designed
for the especial use of mechanical geniuses, daredevils and lunatics."
— George Fitch, Atlanta Constitution Newspaper, 1912
___________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
with running configuration?
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
routines require some mental gymnastics to keep up with but can be a
> “stimulating “ challenge to solve especially if it results in a reusable /
> configurable tool.
>
> Bg
>
> ___
> Emc-users mailing list
> E
Sorry, That was always hidden behind the UI. I never issued a G10 command. I didn't realize that was the GCode behind it. The Probe Basic makes extensive use of G10 in the
probing routine.
On 4/22/24 5:54 AM, andy pugh wrote:
On Sun, 21 Apr 2024 at 02:33, Billy Huddleston via Emc-users
, Apr 19, 2024 at 8:07 PM Billy Huddleston via Emc-users <
emc-users@lists.sourceforge.net> wrote:
> Hey everyone,
>
> I'm still working on getting this AvidCNC setup for use at out maker space.
>
> Let me give you some info on it. It's a 5' x 10' machine, with the first
>
0-3682
r...@pebkac.ca
On Sat, Apr 20, 2024 at 8:28 PM Billy Huddleston via Emc-users <
emc-users@lists.sourceforge.net> wrote:
> I'm unfamiliar with G10 commands or how they would apply to this. I read
> over the documentation on them and don't quiet understand how they would
> wor
trajectory planner and tool table additions..
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
On Sun, 21 Apr 2024 at 02:33, Billy Huddleston via Emc-users <
emc-users@lists.sourceforge.net> wrote:
> I'm unfamiliar with G10 commands or how they would apply to this. I read
> over the documentation on them and don't quiet understand how they would
> work for this.
You ar
I'm unfamiliar with G10 commands or how they would apply to this. I read over
the documentation on them and don't quiet understand how they would work for
this.
On 4/20/24 6:59 AM, andy pugh wrote:
On Sat, 20 Apr 2024 at 02:12, Billy Huddleston via Emc-users
wrote:
> However, When
On Sat, 20 Apr 2024 at 02:12, Billy Huddleston via Emc-users <
emc-users@lists.sourceforge.net> wrote:
> However, When
> you touch off a part, you nuke out your Original G54, or G55 locations.
>
It might help to consider that the various touch-off commands in the GUIs
just run v
rk as well.
Thanks, Billy aka Connor
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
I use Glade, GladeVCP and it work great. Though think I had some problem I
tried buttons with LEDs.
Nicklas Karlsson
tor 2024-04-18 klockan 19:08 + skrev Todd Zuercher via Emc-users:
> It has been a few years since I last built a VCP panel for a machine, and
> well time m
44618
Phone: (330)828-2105ext. 2031
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
On Thu, 18 Apr 2024, Nicklas SB Karlsson wrote:
Date: Thu, 18 Apr 2024 13:33:20 +0200
From: Nicklas SB Karlsson
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Big Tree Tech Re: Mesa Card Stepgens?
...
If it can r
all.
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Chris Albertson
Sent: Wednesday, April 17, 2024 8:51 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Big Tree Tech Re: Mesa Card Stepgens?
[EXTE
sition is small
compared to the header. In that case sending many positions in one message
reduce overhead.
Nicklas Karlsson
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
On Wed, 17 Apr 2024, Chris Albertson wrote:
Date: Wed, 17 Apr 2024 17:50:46 -0700
From: Chris Albertson
To: "Enhanced Machine Controller (EMC)"
Cc: Peter Wallace
Subject: Re: [Emc-users] Big Tree Tech Re: Mesa Card Stepgens?
No it does not fail, we can always send new commands in
The message on my 25+ year old coffee cup from the NIST Intelligent
> Systems Division reminds me at least three times a week to "SENSE ->
> MODEL -> ACT." in that order. Thanks.
> Peter.
>
> Ray
>
>
>
>
> __________
s Division reminds me at least three times a week to "SENSE ->
MODEL -> ACT." in that order. Thanks.
Peter.
Ray
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
fast. Atomic
Energy Canada Limited found that out with the Therac 25.
On Wednesday, April 17, 2024 at 11:04:07 AM MDT, Todd Zuercher via Emc-users
wrote:
Sorry to hijack the thread, but I've had to live with this on a machine that
I'm using cascaded double PID loops on. I have the velocity
On 4/17/24 13:02, Todd Zuercher via Emc-users wrote:
Sorry to hijack the thread, but I've had to live with this on a machine that
I'm using cascaded double PID loops on. I have the velocity loop PIDs running
in a fast floating point base thread to help with the tuning of some
cantankerous
rdware, is extensible and open, and where the feedback
> control math/logic has unlimited resources.
>
>
> Peter Wallace
>
My 25+ year old coffee cup from the NIST Intelligent Systems Division
reminds me about three days a week to "SENSE -- MODEL -- ACT." Thanks
Peter.
Ray
On Wed, 17 Apr 2024, Todd Zuercher wrote:
Date: Wed, 17 Apr 2024 18:14:10 +
From: Todd Zuercher
To: Peter Wallace ,
Todd Zuercher via Emc-users
Subject: RE: [Emc-users] Home to index triggers following error
The machine is currently running Linuxcnc 2.7, but the Mesa cards
Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Peter Wallace
Sent: Wednesday, April 17, 2024 1:09 PM
To: Todd Zuercher via Emc-users
Cc: Todd Zuercher
Subject: Re: [Emc-users] Home to index triggers following error
[EXTERNAL EMAIL] Be sure
On Wed, 17 Apr 2024, Todd Zuercher via Emc-users wrote:
Date: Wed, 17 Apr 2024 17:00:31 +
From: Todd Zuercher via Emc-users
To: "Enhanced Machine Controller (EMC)"
Cc: Todd Zuercher
Subject: Re: [Emc-users] Home to index triggers following error
Sorry to hijack the thread, bu
)828-2105ext. 2031
-Original Message-
From: andy pugh
Sent: Wednesday, April 17, 2024 8:47 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Home to index triggers following error
[EXTERNAL EMAIL] Be sure links are safe.
On Wed, 17 Apr 2024 at 12:45, Tomaz T. wrote:
now
unlimited resources.
Peter Wallace
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
/16/24 20:46, Chris Albertson wrote:
>>> On Apr 15, 2024, at 7:20 PM, gene heskett wrote:
>>>
>>> On 4/15/24 21:16, Gregg Eshelman via Emc-users wrote:
>>>> I have a Hictop printer with some issues so I'm gathering parts to update
>>>> it. Among
r later, only after fresh start and on first one.
___________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
.
Cheers, Gene Heskett, CET.
--
"There are four boxes to be used in defense of libe
l be at most a few encoder counts.
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is designed
for the especial use of mechanical geniuses, daredevils and lunatics."
— George Fitch, Atlanta Constitution Newspaper, 1912
_______
index
pulse, this large spike doesn't accrue on any more on second attempt of homing
or later, only after fresh start and on first one.
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
On 4/16/24 20:46, Chris Albertson wrote:
On Apr 15, 2024, at 7:20 PM, gene heskett wrote:
On 4/15/24 21:16, Gregg Eshelman via Emc-users wrote:
I have a Hictop printer with some issues so I'm gathering parts to update it.
Among them is a Big Tree Tech SKR 1.4 board (not the Turbo, which
> On Apr 15, 2024, at 7:20 PM, gene heskett wrote:
>
> On 4/15/24 21:16, Gregg Eshelman via Emc-users wrote:
>> I have a Hictop printer with some issues so I'm gathering parts to update
>> it. Among them is a Big Tree Tech SKR 1.4 board (not the Turbo, which is
>
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is designed
for the especial use of mechanical geniuses, daredevils and lunatics."
— George Fitch, Atlanta Constitution Newspaper, 1912
_______________
Emc-users mailing list
Emc-us
On 4/16/24 04:15, Gregg Eshelman via Emc-users wrote:
Where do you get those breakout boards? I'm looking for ones already assembled.
Its been several months but I'm pretty sure it was from amazon. Zero
docs though so I had to plugin the pigtail and find the signals with one
of my scopes
> Is your PID also connected to index-enable (so that it can ignore the
> step-change in inputs)
Now it is done like this:
linksp Bindex <= ppmc.0.encoder.04.index-enable
linksp Bindex => axis.4.index-enable
_______
Emc-users mailing li
designed
for the especial use of mechanical geniuses, daredevils and lunatics."
— George Fitch, Atlanta Constitution Newspaper, 1912
___________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
t; ppmc.0.stepgen.00.enable
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
1 - 100 of 86088 matches
Mail list logo
