from the article:
Helium is extracted from deep underground, where deposits of the gas have
built up.
pray tell us, how did the helium deposits get there ?
On Mon, Sep 24, 2012 at 2:07 AM, Jeff Berkowitz pdx...@gmail.com wrote:
The world faces an unimaginable fate: the demise of the helium
wikipedia1: the oil industry flares 150 × 10^9 cubic meters natural
gas annually,
wikipedia2: the concentration of helium in natural gas varies in a
broad range from a few ppm up to over 7%.
assume average 0,1% of flared gas is helium: 150 x 10^6 cubic meters
goes to waste every year.
that must
Accumulated alpha particles from radioactive decay collecting in gas
trapping rock formations. Basically a non-renewable resource after we have
worked through available supplies of shale gas.
Helium can be extracted from the atmosphere - about 5ppm, but will probably
cost ~$5000/kg. Nuclear
Yeah, and remember I was trying to achieve Boron-Hydrogen fusion. At the
beginning of the PF announcement, Pons' and Flieshman suggested that the
electrolysis over potential could induce pressures at the surface of the
metal that are literally astronomical. I don't recall exactly, but it was
This may have already been discussed here, but what are the prevailing
theories that attempt to explain why there is so much helium trapped in
natural gas formations? It makes no sense to me. What causes He to be
trapped in these formations in first place and not somewhere else?
I seem to recall
On Mon, Sep 24, 2012 at 8:38 AM, OrionWorks - Steven Vincent Johnson
orionwo...@charter.net wrote:
This may have already been discussed here, but what are the prevailing
theories that attempt to explain why there is so much helium trapped in
natural gas formations?
The formations which trap
You performed some interesting experiments Chuck. I am always amazed at what
can be done with minimum equipment when someone is curious and inventive. You
seem to have run into a lot of the issues that I am facing, but that is the way
to learn.
The PF effect leaves me asking similar
The first photon was detected even before the other was created. The
observed quantum correlations manifest the non-locality of quantum mechanics
in spacetime.
It takes a strong imagination to transpose this first tentative finding of
Entanglement Between Photons that have Never Coexisted into a
Jones,
Hopefully your lack of mentioning a spoiler alert won't upset anyone here. ;-)
But yes, this was a thoughtfull film. It possessed a decent ending,
considering the unfortunate circumstances that the hero of this story
found himself in.
Regards
Steven Vincent Johnson
www.OrionWorks.com
http://www.defkalion-energy.com/forum/viewtopic.php?f=4t=1303p=9562#p9562
Dear drew,
we do not know where Sterling Allen got this not-even-close-to-real
info on his last report. Please be so kind to ask him as he has not
contacted us since last March, when he payed a short visit in one of our
Maybe in 10 million yrs this civilization will have developed the highly
sophisticated complex process by which the strong/weak nuclear,
electromagnetic, gravitational forces can be altered or manipulated. It will
require
millions of yrs to develope a 'hole' complete working knowledge of the
Chuck, a few postings earlier in this e-mail thread, somebody pointed out
you had done some works on the applied coin.
He suggested part of the coin was bended. Can you confirm this?
In my opinion this might be a crusial pre-processing if you did.
Op maandag 24 september 2012 schreef David
At 08:23 AM 9/24/2012, Terry Blanton wrote:
If Dr. Storms is right, we might produce helium from hydrogen in his cracks.
Well, not if he is right, the conclusion Storms presents that PdD
cold fusion generates helium is not speculative, it's solid and
deserves, at this point, to be
Abd ul-Rahman Lomax a...@lomaxdesign.com wrote:
Producing the world's energy consumption with PdD cold fusion would
produce roughly 900 metric tons of helium per year.
In my book, I estimated 1,227 tons of helium per year. I talked to a
variety of people and had them check the numbers.
I wrote:
I think there is evidence that cold fusion can increase the reaction rate
of some conventional reactions.
See Reifenschweiler.
- Jed
Teslaalset, yes I can confirm that. First I would always wash and clean
the coins as best as possible. Then using a hacksaw, I would make two cuts
about a half inch into the coin and 1/8 inch apart. Then using needle
nose pliers, you can just bend the tab up. That worked good for the ptree
I think these are Chuck's first posts on usenet
:
5/4/89
https://groups.google.com/forum/?hl=enfromgroups=#!topic/alt.fusion/BwPLHQ2lO
TE
...
Using these ideas, here is a basement physics experiment,
I've tried
(It's only sugjested as possible way to see cold fusion if B2H-- is
doing as I
At 02:05 PM 9/24/2012, Alan J Fletcher wrote:
I think these are Chuck's first posts on usenet :
5/4/89
That would be 5/14/89
Hello Chuck,
You have made an interresting experiment worth to try to repeat. Teslaalset
and Dave are on it seems.
Chuch, did you try with another salt than Borax and succeed on excess heat
as you had with Borax ? Is Borax a key element ?
Best regards,
Arnaud Kodeck
Re: [Vo]:example of a bad prognostication
LORENHEYER
Mon, 24 Sep 2012 10:38:07 -0700
Maybe in 10 million yrs this civilization will have developed the highly
sophisticated complex process by which the strong/weak nuclear,
electromagnetic, gravitational forces can be altered or manipulated.
In reply to Jones Beene's message of Mon, 24 Sep 2012 08:43:30 -0700:
Hi,
[snip]
The first photon was detected even before the other was created. The
observed quantum correlations manifest the non-locality of quantum mechanics
in spacetime.
In the actual paper they state
The two other
photons
In reply to Jones Beene's message of Mon, 24 Sep 2012 08:43:30 -0700:
Hi,
[snip]
I wrote:
Or in their terminology will be correlated.
Let me rephrase that. The photons are correlated, but not entangled.
Entanglement doesn't exist.
Regards,
Robin van Spaandonk
Hi Arnaud,
Yes, I did try two other electrolytes; Boric Acid (H3BO3) was one,
and Potassium Hydroxide (KOH). Mills was a proponent of the KOH and nickel
and his shrunken hydrogen theory (the hydrino concept) was interesting.
He put some work into, but I could never get it to work. The
I just won a 0-30V 5A power supply on eBay. Now I need to save up
for a coup'la nickels.
(I really AM going to scoop up some free Borax!)
At 03:38 PM 9/24/2012, Jed Rothwell wrote:
I wrote:
I think there is evidence that cold fusion can increase the reaction
rate of some conventional reactions.
See Reifenschweiler.
Well, no. That isn't cold fusion. It's LENR. That is, there are
nuclear reactions that are known where the
At 04:47 PM 9/24/2012, Arnaud Kodeck wrote:
You have made an interresting experiment worth to try to repeat.
Teslaalset and Dave are on it seems.
Chuch, did you try with another salt than Borax and succeed on
excess heat as you had with Borax ? Is Borax a key element ?
The experimental
It might cost you more to scoop up some borax after driving than it would at
the grocery. Congrats on the supply.
My pencil lead electrode has held up all day without a problem. The key
appears to keep some crystals of the electrolyte on the bottom of the container
at all times.
I don't want to frighten people away from trying things. Playing with
electrochemistry can be a way to learn about it, and to start to get
a sense for what has happened in the field. Chuck's experiences with
things getting gunked up, for example.
CF anodes (the electrode connected to the
How about a Hoffman tube to capture the hydrogen and a wall mart aerator for a
fish tank to circulate it back up thru the electrolyte – the excess would
escape but pure hydrogen could be obtained from a small plastic tube stuck up
inside at the top of the Hoffman tube running down to a
From: Abd ul-Rahman Lomax a...@lomaxdesign.com
I don't want to frighten people away from trying things. Playing with
electrochemistry can be a way to learn about it, and to start to get
a sense for what has happened in the field.
I plan to run mine outside (either in the open, or under my
On Mon, Sep 24, 2012 at 7:00 PM, Roarty, Francis X
francis.x.roa...@lmco.com wrote:
How about a Hoffman tube to capture the hydrogen and a wall mart aerator
for a fish tank to circulate it back up thru the electrolyte – the excess
would escape but pure hydrogen could be obtained from a small
I am running my experiment outside upon a glass table on an open porch. The
thought of free hydrogen indoors concerned me.
If your supply has a short circuit current adjustment then you may not need
further protection. That is what I am using and there have been no problems
thus far as I
Eric, have you heard the expression that you can lead a horse to water but not
make it drink? He would probably refuse to consider your proposal.
I am not sure that re circulating the hydrogen would make a great deal of
difference to the loading since the electrolysis exerts a powerful force
On Mon, Sep 24, 2012 at 9:58 PM, David Roberson dlrober...@aol.com wrote:
I have been seeking a constant current through the nickel versus a constant
power into the system since the resistance of the electrolyte is dominate.
High resistivity is not necessarily an issue, per se. In the Pd/D
34 matches
Mail list logo