Alan, Thanks so much for your reply. At some point I'll probably get a new computer, but for now I'm stuck with the external drives. I have reconfigured my virtual memory, so things are running better now.
If the PC was running hot, would I be able to feel any heat coming from it on the outside? Nowhere on the PC does it even feel warm, except on the back, and it's hardly warm at all. Only slightly more than room temperature. I'm using a Sony VAIO desktop, Pentium(R) 4 CPU 3.20 GHz, 3.20 GHz dual processors, 2.00 GB of RAM. I wish I could add more memory, but 2.00 GB was the most I could use. Thanks again, Jean ----- Original Message ----- From: Alan K Baker To: [email protected] Sent: Monday, August 06, 2007 3:23 AM Subject: [AP] Re: Speed achievement [was: Noob] Hello Jean. As you've realised, Premiere Pro doesn't care too much where your scratch disk is situated, but there are a lot of variables with external HDDs, especially those mounted in caddies. USBII is respectably fast, but will not achieve the raw speed of a drive connected directly to your motherboard. Firewire is even worse. Unless you have SATAII ports on the backplane of your PC, then USB and IEE1394 are pretty well all that's available these days, especially since SCSI is in decline and was always over expensive. I tried an external SATAII drive in a caddy once, with SATAII connections all the way, but the speeds were nowhere near as good as the internal drives. I guess this was down to the buffering hardware used by the caddy. So, my conclusion is that internal 7200RPM SATAII HDDs (preferably two in RAID 0 configuration) will achieve the highest speeds. I only ever use external HDDs for transfers and backups where time is not of the essence. Another thing that tends to be forgotten is that video rendering is processor intensive and processors that have to work hard can get very hot. Preferably use cooling system that is extra efficient and has a ramp-up/ramp-down facility. If you don't cool your processor adequately, anything after and including a P4 will ramp its speed down if it gets overheated. Regards, Alan. www.theatreorgans.co.uk Admin: ConnArtistes, UKShopsmiths, 2nd Touch & A-P groups Shopsmith 520 + bits Flatulus Antiquitus ----- Original Message ----- From: Jean Chang To: [email protected] Sent: Monday, August 06, 2007 6:52 AM Subject: Re: [AP] Noob Hi Alan, I keep reading that we should have our scratch disks on a separate hard drive from the OS. Can you use an external HDD for the scratch disks, or does it have to be internal? I bought a 320 GB HDD to use as a scratch disk, but didn't see any improvement in performance, and then someone told me it has to be internal not external. Is that really the case? Thanks, Jean . [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Adobe-Premiere/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Adobe-Premiere/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
