Forrest,

Did you check his screenshot? Doesn't he need a gps antenna, and what's the
syncbox JR for?

On Wed, Oct 3, 2018 at 9:16 AM Eric Muehleisen <[email protected]> wrote:

> I'm considering N000000L101A or similar so I can future proof myself in
> case we add an additional AP or BH down the road.
>
> On Wed, Oct 3, 2018 at 10:29 AM Forrest Christian (List Account) <
> [email protected]> wrote:
>
>> I have the new 3.65 medusa on my mind.... plus I'm a bit tired.
>>
>> The 48V 2.5A power supplies will run 2 non 3.65 medusa radios each. If
>> you jumper the boards so 2 radios run off of each power supply you'll be
>> fine (the AF24 is a similar quantity of power).
>>
>> But, a bulk supply is probably a better idea if you can find one in your
>> right form factor.
>>
>>
>>
>> On Wed, Oct 3, 2018 at 8:07 AM Eric Muehleisen <[email protected]>
>> wrote:
>>
>>> I've been using CTM2's for nearly a decade, but they do not support
>>> 450m. CMM5 is waaay to expensive for what it does and is clunky. I've been
>>> looking at Packetflux's RackInjector's.
>>>
>>> I'm not familiar with PacketFlux products and need clarity on something.
>>> See attached. I need to power (3) 450m AP's and a(1) AF24. I also need
>>> physical spares for each unit. Is the attached parts list correct or am I
>>> missing something?
>>>
>>> Thanks!
>>> --
>>> AF mailing list
>>> [email protected]
>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>>
>>
>>
>> --
>> *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.*
>> Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602
>> [email protected] | http://www.packetflux.com
>> <http://www.linkedin.com/in/fwchristian>
>> <http://facebook.com/packetflux>  <http://twitter.com/@packetflux>
>>
>> --
>> AF mailing list
>> [email protected]
>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>
> --
> AF mailing list
> [email protected]
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
-- 
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to