And, I believe it needs to be plugged into the center jack on the SyncPipe as well, not the side ones. The side ones are 6p6c connectors to provide sync to a A/P by sync cable.
On Tue, Dec 29, 2015 at 5:44 PM, Josh Luthman <[email protected]> wrote: > Syncpipe needs power. Up to 50v? > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > On Dec 29, 2015 7:18 PM, "Scott Vander Dussen" <[email protected]> > wrote: > >> Trying to use a SyncInjector to provide timing over power to a mix of >> 100/450APs. >> >> >> >> Gigabit SyncInjector revision I0, SyncPipe Deluxe revision H1 both >> receiving 27vdc. SyncPipe timing port directly to APs timing port works >> fine. SyncPipe timing port to SyncInjector “SyncPipe or Daisy Chain In” >> port does not seem to work. (see syncinjector.jpg) I’ve tried two >> SyncInjectors with the same results. If the SyncInjector is receiving sync >> from the SyncPipe, should I see the value column populated? (See site >> monitor string.png) >> >> >> >> Is there any configuration I need to change for the >> SyncInjector/SiteMonitor to make this combo work? Thanks in advance. >> >
