No POE. Both devices need power. The Syncpipe has a GPS module and does timing on the 6p6c ports.
Timing ports can be daisy chained (which is how SyncInjector gets timing). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 29, 2015 7:53 PM, "Scott Vander Dussen" <[email protected]> wrote: > OK, so the SyncInjector provides PoE from its “SyncPipe or Daisy Chain In” > RJ45 port, and that plugs into the center RJ45 port of the SyncPipe? So > the SyncPipe receives PoE from the SyncInjector and sends timing back > though that same cable? I tried that and it didn’t work :/ > > > > *From:* Af [mailto:[email protected]] *On Behalf Of *Josh Luthman > *Sent:* Tuesday, December 29, 2015 16:49 > *To:* [email protected] > *Subject:* Re: [AFMUG] SyncInjector n00b question > > > > Correct. RJ45 simply won't fit on the outside ones. > > > > It will have one of the LEDs on when it's powered/booted if memory > serves. Maybe green? I think the amber blinks every second or three to > let you know it's good to go...something like that... > > > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > > On Tue, Dec 29, 2015 at 7:46 PM, Steve Utick <[email protected]> wrote: > > And, I believe it needs to be plugged into the center jack on the SyncPipe > as well, not the side ones. The side ones are 6p6c connectors to provide > sync to a A/P by sync cable. > > > > On Tue, Dec 29, 2015 at 5:44 PM, Josh Luthman <[email protected]> > wrote: > > Syncpipe needs power. Up to 50v? > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Dec 29, 2015 7:18 PM, "Scott Vander Dussen" <[email protected]> > wrote: > > Trying to use a SyncInjector to provide timing over power to a mix of > 100/450APs. > > > > Gigabit SyncInjector revision I0, SyncPipe Deluxe revision H1 both > receiving 27vdc. SyncPipe timing port directly to APs timing port works > fine. SyncPipe timing port to SyncInjector “SyncPipe or Daisy Chain In” > port does not seem to work. (see syncinjector.jpg) I’ve tried two > SyncInjectors with the same results. If the SyncInjector is receiving sync > from the SyncPipe, should I see the value column populated? (See site > monitor string.png) > > > > Is there any configuration I need to change for the > SyncInjector/SiteMonitor to make this combo work? Thanks in advance. > > > > >
