Can you just have them RDP into a server at the NOC over a hotspot and
then just have them access the radio from that server over your
network? No Special Network config on the remote device then. You can
just use the power from the FSK Radio, and confirm that there's an
Ethernet link to the customer.
This is how I've been aligning a majority of the radios I've been
putting up. No Special config needed at the device plugging in, and
get's around the whole 'EPMP Supercomputer Access' Problem. Since the
server will have enough spare CPU Cycles to spend rendering the pages.
On 4/21/2016 9:08 AM, Josh Luthman wrote:
Oh whoops I saw without.
We NAT radios so we use the lan port IP. You might want to use
169.254.1.1 if you're bridging.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Apr 21, 2016 10:03 AM, "Brandon Yuchasz" <[email protected]
<mailto:[email protected]>> wrote:
Yep that’s the plan. Send the guys out with a bunch of Epmp on the
truck already programmed to swap out FSK. Have them use a phone or
tablet to tune them and role to the next.
Best regards,
Brandon Yuchasz
GogebicRange.net
www.gogebicrange.net <http://www.gogebicrange.net/>
*From:*Af [mailto:[email protected]
<mailto:[email protected]>] *On Behalf Of *Josh Luthman
*Sent:* Thursday, April 21, 2016 8:57 AM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [AFMUG] Battery pack and wifi
You'd need a phone or tablet with that...
Josh Luthman
Office: 937-552-2340 <tel:937-552-2340>
Direct: 937-552-2343 <tel:937-552-2343>
1100 Wayne St
Suite 1337
Troy, OH 45373
On Apr 21, 2016 9:54 AM, "Brandon Yuchasz" <[email protected]
<mailto:[email protected]>> wrote:
Anyone using these or have another US based version?
http://www.gevaelettronica.it/shop/index.php?id_product=1&controller=product&id_lang=2
I am looking for something the installers can tune Epmp with using
tablets or phones. Not sure how I would deal with different IP
structures based on the tower they are installing on but I bet you
guys have ideas on that as well.
Best regards,
Brandon Yuchasz
GogebicRange.net
www.gogebicrange.net <http://www.gogebicrange.net/>
