Oh my god that sounds convoluted. Also assumes there's a working hotspot :P
On Thu, Apr 21, 2016 at 9:15 AM, Nate Burke <[email protected]> wrote: > Can you just have them RDP into a server at the NOC over a hotspot and then > just have them access the radio from that server over your network? No > Special Network config on the remote device then. You can just use the > power from the FSK Radio, and confirm that there's an Ethernet link to the > customer. > > This is how I've been aligning a majority of the radios I've been putting > up. No Special config needed at the device plugging in, and get's around > the whole 'EPMP Supercomputer Access' Problem. Since the server will have > enough spare CPU Cycles to spend rendering the pages. > > On 4/21/2016 9:08 AM, Josh Luthman wrote: > > Oh whoops I saw without. > > We NAT radios so we use the lan port IP. You might want to use 169.254.1.1 > if you're bridging. > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Apr 21, 2016 10:03 AM, "Brandon Yuchasz" <[email protected]> wrote: >> >> Yep that’s the plan. Send the guys out with a bunch of Epmp on the truck >> already programmed to swap out FSK. Have them use a phone or tablet to tune >> them and role to the next. >> >> >> >> >> >> Best regards, >> >> Brandon Yuchasz >> >> GogebicRange.net >> >> www.gogebicrange.net >> >> >> >> From: Af [mailto:[email protected]] On Behalf Of Josh Luthman >> Sent: Thursday, April 21, 2016 8:57 AM >> To: [email protected] >> Subject: Re: [AFMUG] Battery pack and wifi >> >> >> >> You'd need a phone or tablet with that... >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Apr 21, 2016 9:54 AM, "Brandon Yuchasz" <[email protected]> wrote: >> >> Anyone using these or have another US based version? >> >> >> http://www.gevaelettronica.it/shop/index.php?id_product=1&controller=product&id_lang=2 >> >> >> >> I am looking for something the installers can tune Epmp with using tablets >> or phones. Not sure how I would deal with different IP structures based on >> the tower they are installing on but I bet you guys have ideas on that as >> well. >> >> >> >> >> >> Best regards, >> >> Brandon Yuchasz >> >> GogebicRange.net >> >> www.gogebicrange.net >> >> > >
