We never had any issues with that TBH. We rigged up airgateways to a dcdc1224 from tycon with a 12ah battery. Used our phones for configuration / aiming.
On Thu, Apr 21, 2016 at 10:12 AM, Brian Sullivan <[email protected]> wrote: > What if the CPE is 2.4 GHz and your hotspot/battery rig is using the same > frequency? Wont there be a SNR impact? > > On 4/21/2016 10:09 AM, Josh Luthman wrote: > > +1 > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Apr 21, 2016 11:08 AM, "Josh Reynolds" <[email protected]> wrote: >> >> Oh my god that sounds convoluted. Also assumes there's a working hotspot >> :P >> >> On Thu, Apr 21, 2016 at 9:15 AM, Nate Burke <[email protected]> wrote: >> > Can you just have them RDP into a server at the NOC over a hotspot and >> > then >> > just have them access the radio from that server over your network? No >> > Special Network config on the remote device then. You can just use the >> > power from the FSK Radio, and confirm that there's an Ethernet link to >> > the >> > customer. >> > >> > This is how I've been aligning a majority of the radios I've been >> > putting >> > up. No Special config needed at the device plugging in, and get's >> > around >> > the whole 'EPMP Supercomputer Access' Problem. Since the server will >> > have >> > enough spare CPU Cycles to spend rendering the pages. >> > >> > On 4/21/2016 9:08 AM, Josh Luthman wrote: >> > >> > Oh whoops I saw without. >> > >> > We NAT radios so we use the lan port IP. You might want to use >> > 169.254.1.1 >> > if you're bridging. >> > >> > Josh Luthman >> > Office: 937-552-2340 >> > Direct: 937-552-2343 >> > 1100 Wayne St >> > Suite 1337 >> > Troy, OH 45373 >> > >> > On Apr 21, 2016 10:03 AM, "Brandon Yuchasz" <[email protected]> >> > wrote: >> >> >> >> Yep that’s the plan. Send the guys out with a bunch of Epmp on the >> >> truck >> >> already programmed to swap out FSK. Have them use a phone or tablet to >> >> tune >> >> them and role to the next. >> >> >> >> >> >> >> >> >> >> >> >> Best regards, >> >> >> >> Brandon Yuchasz >> >> >> >> GogebicRange.net >> >> >> >> www.gogebicrange.net >> >> >> >> >> >> >> >> From: Af [mailto:[email protected]] On Behalf Of Josh Luthman >> >> Sent: Thursday, April 21, 2016 8:57 AM >> >> To: [email protected] >> >> Subject: Re: [AFMUG] Battery pack and wifi >> >> >> >> >> >> >> >> You'd need a phone or tablet with that... >> >> >> >> Josh Luthman >> >> Office: 937-552-2340 >> >> Direct: 937-552-2343 >> >> 1100 Wayne St >> >> Suite 1337 >> >> Troy, OH 45373 >> >> >> >> On Apr 21, 2016 9:54 AM, "Brandon Yuchasz" <[email protected]> >> >> wrote: >> >> >> >> Anyone using these or have another US based version? >> >> >> >> >> >> >> >> http://www.gevaelettronica.it/shop/index.php?id_product=1&controller=product&id_lang=2 >> >> >> >> >> >> >> >> I am looking for something the installers can tune Epmp with using >> >> tablets >> >> or phones. Not sure how I would deal with different IP structures >> >> based on >> >> the tower they are installing on but I bet you guys have ideas on that >> >> as >> >> well. >> >> >> >> >> >> >> >> >> >> >> >> Best regards, >> >> >> >> Brandon Yuchasz >> >> >> >> GogebicRange.net >> >> >> >> www.gogebicrange.net >> >> >> >> >> > >> > > >
