What if the CPE is 2.4 GHz and your hotspot/battery rig is using the
same frequency? Wont there be a SNR impact?
On 4/21/2016 10:09 AM, Josh Luthman wrote:
+1
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Apr 21, 2016 11:08 AM, "Josh Reynolds" <[email protected]
<mailto:[email protected]>> wrote:
Oh my god that sounds convoluted. Also assumes there's a working
hotspot :P
On Thu, Apr 21, 2016 at 9:15 AM, Nate Burke <[email protected]
<mailto:[email protected]>> wrote:
> Can you just have them RDP into a server at the NOC over a
hotspot and then
> just have them access the radio from that server over your
network? No
> Special Network config on the remote device then. You can just
use the
> power from the FSK Radio, and confirm that there's an Ethernet
link to the
> customer.
>
> This is how I've been aligning a majority of the radios I've
been putting
> up. No Special config needed at the device plugging in, and
get's around
> the whole 'EPMP Supercomputer Access' Problem. Since the server
will have
> enough spare CPU Cycles to spend rendering the pages.
>
> On 4/21/2016 9:08 AM, Josh Luthman wrote:
>
> Oh whoops I saw without.
>
> We NAT radios so we use the lan port IP. You might want to use
169.254.1.1
> if you're bridging.
>
> Josh Luthman
> Office: 937-552-2340 <tel:937-552-2340>
> Direct: 937-552-2343 <tel:937-552-2343>
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
> On Apr 21, 2016 10:03 AM, "Brandon Yuchasz"
<[email protected] <mailto:[email protected]>> wrote:
>>
>> Yep that’s the plan. Send the guys out with a bunch of Epmp on
the truck
>> already programmed to swap out FSK. Have them use a phone or
tablet to tune
>> them and role to the next.
>>
>>
>>
>>
>>
>> Best regards,
>>
>> Brandon Yuchasz
>>
>> GogebicRange.net
>>
>> www.gogebicrange.net <http://www.gogebicrange.net>
>>
>>
>>
>> From: Af [mailto:[email protected]
<mailto:[email protected]>] On Behalf Of Josh Luthman
>> Sent: Thursday, April 21, 2016 8:57 AM
>> To: [email protected] <mailto:[email protected]>
>> Subject: Re: [AFMUG] Battery pack and wifi
>>
>>
>>
>> You'd need a phone or tablet with that...
>>
>> Josh Luthman
>> Office: 937-552-2340 <tel:937-552-2340>
>> Direct: 937-552-2343 <tel:937-552-2343>
>> 1100 Wayne St
>> Suite 1337
>> Troy, OH 45373
>>
>> On Apr 21, 2016 9:54 AM, "Brandon Yuchasz"
<[email protected] <mailto:[email protected]>> wrote:
>>
>> Anyone using these or have another US based version?
>>
>>
>>
http://www.gevaelettronica.it/shop/index.php?id_product=1&controller=product&id_lang=2
>>
>>
>>
>> I am looking for something the installers can tune Epmp with
using tablets
>> or phones. Not sure how I would deal with different IP
structures based on
>> the tower they are installing on but I bet you guys have ideas
on that as
>> well.
>>
>>
>>
>>
>>
>> Best regards,
>>
>> Brandon Yuchasz
>>
>> GogebicRange.net
>>
>> www.gogebicrange.net <http://www.gogebicrange.net>
>>
>>
>
>
