Throughput maybe. Signal no. Though ePMP would kick the shit out of my little handheld AP. In all reality I think the little things don't cause enough noise, you're doing maybe 100kbps watching the align tool.
You aim it, then power off your device. No SNR/noise problems at all. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Apr 21, 2016 at 11:51 AM, Brian Sullivan <[email protected]> wrote: > I guess I would be concerned by impacting the SNR on the CPE while trying > to qualify the signal. If your WiFi pack is interfering with the CPE, > wouldn't you get a false throughput test while standing next to it? > > On 4/21/2016 10:15 AM, Josh Luthman wrote: > > Sure, but you're just aligning signal. The signal to the phone should be > strong enough that you can get the align tool to load and the signal to the > CPE should be strong enough that it can associate. It's never been an > issue for us. > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Thu, Apr 21, 2016 at 11:12 AM, Brian Sullivan < > [email protected]> wrote: > >> What if the CPE is 2.4 GHz and your hotspot/battery rig is using the same >> frequency? Wont there be a SNR impact? >> >> On 4/21/2016 10:09 AM, Josh Luthman wrote: >> >> +1 >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> On Apr 21, 2016 11:08 AM, "Josh Reynolds" <[email protected]> wrote: >> >>> Oh my god that sounds convoluted. Also assumes there's a working hotspot >>> :P >>> >>> On Thu, Apr 21, 2016 at 9:15 AM, Nate Burke < <[email protected]> >>> [email protected]> wrote: >>> > Can you just have them RDP into a server at the NOC over a hotspot and >>> then >>> > just have them access the radio from that server over your network? No >>> > Special Network config on the remote device then. You can just use the >>> > power from the FSK Radio, and confirm that there's an Ethernet link to >>> the >>> > customer. >>> > >>> > This is how I've been aligning a majority of the radios I've been >>> putting >>> > up. No Special config needed at the device plugging in, and get's >>> around >>> > the whole 'EPMP Supercomputer Access' Problem. Since the server will >>> have >>> > enough spare CPU Cycles to spend rendering the pages. >>> > >>> > On 4/21/2016 9:08 AM, Josh Luthman wrote: >>> > >>> > Oh whoops I saw without. >>> > >>> > We NAT radios so we use the lan port IP. You might want to use >>> 169.254.1.1 >>> > if you're bridging. >>> > >>> > Josh Luthman >>> > Office: 937-552-2340 >>> > Direct: 937-552-2343 >>> > 1100 Wayne St >>> > Suite 1337 >>> > Troy, OH 45373 >>> > >>> > On Apr 21, 2016 10:03 AM, "Brandon Yuchasz" <[email protected]> >>> wrote: >>> >> >>> >> Yep that’s the plan. Send the guys out with a bunch of Epmp on the >>> truck >>> >> already programmed to swap out FSK. Have them use a phone or tablet >>> to tune >>> >> them and role to the next. >>> >> >>> >> >>> >> >>> >> >>> >> >>> >> Best regards, >>> >> >>> >> Brandon Yuchasz >>> >> >>> >> GogebicRange.net >>> >> >>> >> www.gogebicrange.net >>> >> >>> >> >>> >> >>> >> From: Af [mailto: <[email protected]>[email protected]] On >>> Behalf Of Josh Luthman >>> >> Sent: Thursday, April 21, 2016 8:57 AM >>> >> To: [email protected] >>> >> Subject: Re: [AFMUG] Battery pack and wifi >>> >> >>> >> >>> >> >>> >> You'd need a phone or tablet with that... >>> >> >>> >> Josh Luthman >>> >> Office: 937-552-2340 >>> >> Direct: 937-552-2343 >>> >> 1100 Wayne St >>> >> Suite 1337 >>> >> Troy, OH 45373 >>> >> >>> >> On Apr 21, 2016 9:54 AM, "Brandon Yuchasz" <[email protected]> >>> wrote: >>> >> >>> >> Anyone using these or have another US based version? >>> >> >>> >> >>> >> >>> http://www.gevaelettronica.it/shop/index.php?id_product=1&controller=product&id_lang=2 >>> >> >>> >> >>> >> >>> >> I am looking for something the installers can tune Epmp with using >>> tablets >>> >> or phones. Not sure how I would deal with different IP structures >>> based on >>> >> the tower they are installing on but I bet you guys have ideas on >>> that as >>> >> well. >>> >> >>> >> >>> >> >>> >> >>> >> >>> >> Best regards, >>> >> >>> >> Brandon Yuchasz >>> >> >>> >> GogebicRange.net >>> >> >>> >> www.gogebicrange.net >>> >> >>> >> >>> > >>> > >>> >> >> > >
