Yup only in perfect world. We need to replace few 2x links. But lot of our links are 4x. If we did not install at 4x we will not able to do more than half our installs. We look for 40meg and up on down loads on speed test and 4x and up, If we get that then we install it.
Tushar > On Jan 20, 2017, at 11:52 AM, Eric Muehleisen <ericm...@gmail.com> wrote: > > In a perfect world. > >> On Fri, Jan 20, 2017 at 11:32 AM, Kurt Fankhauser <lists.wavel...@gmail.com> >> wrote: >> You shouldn't be putting any clients on a 450AP with less than 4x >> connections, when they start pulling a lot of traffic they significantly >> choke the AP. Whoever engineered those links needs slapped. I know it >> probably looked like a good idea at the time to add a new customer but a >> couple low signal clients really affect total AP capacity. You could >> probably pull all the 1x and 2x clients and replace them with 10 times more >> customers running at 8x mnodulatio n and maintain the same utilization rates >> on that AP. >> >>> On Thu, Jan 19, 2017 at 9:45 PM, Craig Schmaderer >>> <cr...@skywaveconnect.com> wrote: >>> Remember that even a couple of sms runing at 2x or 4x will kill your peak >>> performance if they are the ones that are usually streaming. We are very >>> careful on what aps we put low signals on and we control what plans we >>> offer as well based on signal strength. I just can not have a 2x customer >>> want a 10mb plan. I do think that a 450i will definitely help with uplink >>> interference like others have said. But i think your best bet is to drop >>> the cash and put some 450m up on that tower. Sounds like that is a cash >>> cow tower like my main tower is. >>> >>> >>> From: Af <af-boun...@afmug.com> on behalf of Jon Langeler >>> <jon-ispli...@michwave.net> >>> Sent: Thursday, January 19, 2017 4:18:22 PM >>> To: af@afmug.com >>> Subject: Re: [AFMUG] 450 vs 450i >>> >>> Put a Mikrotik behind an SM and speed test to the internet >>> >>> Jon Langeler >>> Michwave Technologies, Inc. >>> >>> >>> > On Jan 19, 2017, at 1:08 PM, Brian Sullivan <installe...@foxvalley.net> >>> > wrote: >>> > >>> > I would check out page 9-51 in the PMP 450x Configuration and User Guide >>> > 15.0.2 >>> > >>> >> On 1/19/2017 11:37 AM, Tushar Patel wrote: >>> >> So how can we tell when we are really saturating the connection? >>> > >> >
