Any news on your Brewtus situation and how the vendor dealt with the
issue?
- Pete

On Jan 13, 8:53 am, Dennis Keating <[email protected]>
wrote:
> i own a B1 w the factory pid upgrade and rotary pump/main line feed.
> last week i arose to brew my morning coffee to see my pid was also
> reading 245 or so.  i could barely operate the brew lever the water was
> so hot.  my machine is on a timer, and works flawlessly every morn.  my
> steam boiler was not over pressured, tho.  i think after flushing down
> the temp somewhat, i left the machine off to completely cool down.
> later on, the thing worked okay, and has since then.  BUT, what is going
> on, TODD? -Dennis
>
> On 1/13/2012 5:04 AM, Judge wrote:
>
>
>
>
>
>
>
> > My letter sent to retailer. I will let you know how it all turns out
> > and just who the retailer is soon.
>
> > "    Hello,
>
> > This morning I was woken to a frightful bang as my Expobar IV tank
> > over-pressured.  I came down stairs to it venting. All the cups on the
> > top of the machine had been blown off so I imagine the tank ruptured.
> > It was leaking water everywhere, had a strong smell of burning and
> > showed a pressure of over 2 bars on the boiler (upper gauge, and it
> > had been venting a few minutes). Should be noted steam in the gauge. I
> > shut it down, opened the hot water tap to relieve pressure.  After
> > doing so I turned it back on noted that the PID showed a temperature
> > of 245 F (I keep it at 202 F) and it started to leak as soon as the
> > pump began to fill the tank.
>
> > I figure as the machine is new I am best not even opening it and start
> > poking around, and messing with the warranty. I do have the original
> > box as stated in your red carpet warranty.
>
> > Awaiting your response as to how we may deal with this clearly
> > defective machine. A real shock as I have woken to expecting a perfect
> > cup of espresso every morning now.
>
> > All the best
>
> > John. "

-- 
You received this message because you are subscribed to the Google Groups 
"Brewtus" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/brewtus?hl=en.

Reply via email to