It kept climbing, and I shut it down when it hit about 235f. They have no idea having changed both items. If I ever find out from them I will let you know.
On Feb 2, 1:57 pm, Dennis Keating <[email protected]> wrote: > thats interesting - did it heat the front boiler to 245 deg ? - mine did > that once lately and i would like to know what to suspect - Dennis > > On 2/1/2012 3:27 PM, Judge wrote: > > > > > > > > > Well as promised an update. > > > I changed the processor and pressure stat. Sent to me by ZCafe one at > > a time as requested by phone. After doing so front boiler still just > > climbed without shutting off. End result is ZCafe is sending me a new > > machine. An I mean right away not even waiting for the return of the > > old one. > > > With service like that what can I say? Any Canadians looking for > > equipment I would definitely look at ZCafe. > > > Good luck all, and enjoy reading all posts here thank you all. > > > John > > > On Jan 25, 9:46 am, "[email protected]"<[email protected]> > > wrote: > >> John, > > >> Sounds like a positive outcome and experience. I have dealt with Zcafe > >> for minor service issues, and found them to be very good. Good luck > >> with the repair. > > >> Pete > > >> On Jan 25, 5:57 am, John Gibbon<[email protected]> wrote: > > >>> Well, my dealer is now sending me a new hose, pressurestat and computer. > >>> I > >>> actually like this instead of sending the machine. If it does not fix it > >>> will be shipping. He says the heater element will be fine, but is adding > >>> another year to the warranty just in case. > >>> John > >>> On Thu, Jan 19, 2012 at 4:53 PM, Dennis > >>> Keating<[email protected] > >>>> wrote: > >>>> not a word but luckilyit hasnt reoccured - so far our vendor has never > >>>> responded to my question rather new buyers instead > >>>> On 1/18/2012 9:15 AM, [email protected] wrote: > >>>> Any news on your Brewtus situation and how the vendor dealt with the > >>>> issue? > >>>> - Pete > >>>> On Jan 13, 8:53 am, Dennis Keating<[email protected]> > >>>> <[email protected]> > >>>> wrote: > >>>> i own a B1 w the factory pid upgrade and rotary pump/main line feed. > >>>> last week i arose to brew my morning coffee to see my pid was also > >>>> reading 245 or so. i could barely operate the brew lever the water was > >>>> so hot. my machine is on a timer, and works flawlessly every morn. my > >>>> steam boiler was not over pressured, tho. i think after flushing down > >>>> the temp somewhat, i left the machine off to completely cool down. > >>>> later on, the thing worked okay, and has since then. BUT, what is going > >>>> on, TODD? -Dennis > >>>> On 1/13/2012 5:04 AM, Judge wrote: > >>>> My letter sent to retailer. I will let you know how it all turns out > >>>> and just who the retailer is soon. > >>>> " Hello, > >>>> This morning I was woken to a frightful bang as my Expobar IV tank > >>>> over-pressured. I came down stairs to it venting. All the cups on the > >>>> top of the machine had been blown off so I imagine the tank ruptured. > >>>> It was leaking water everywhere, had a strong smell of burning and > >>>> showed a pressure of over 2 bars on the boiler (upper gauge, and it > >>>> had been venting a few minutes). Should be noted steam in the gauge. I > >>>> shut it down, opened the hot water tap to relieve pressure. After > >>>> doing so I turned it back on noted that the PID showed a temperature > >>>> of 245 F (I keep it at 202 F) and it started to leak as soon as the > >>>> pump began to fill the tank. > >>>> I figure as the machine is new I am best not even opening it and start > >>>> poking around, and messing with the warranty. I do have the original > >>>> box as stated in your red carpet warranty. > >>>> Awaiting your response as to how we may deal with this clearly > >>>> defective machine. A real shock as I have woken to expecting a perfect > >>>> cup of espresso every morning now. > >>>> All the best > >>>> John. " > >>>> -- > >>>> You received this message because you are subscribed to the Google Groups > >>>> "Brewtus" group. > >>>> To post to this group, send email to [email protected]. > >>>> To unsubscribe from this group, send email to > >>>> [email protected]. > >>>> For more options, visit this group at > >>>>http://groups.google.com/group/brewtus?hl=en. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
