Can you mail it to me please Michael? [email protected]
Thanks JohnB On Fri, Aug 22, 2014 at 6:34 PM, Michael Endacott <[email protected]> wrote: > I've got wiring diagrams for the pid upgrade from WLL, I used them to > understand the wiring but it's pretty simple stuff. > > the thing that confuses me is I thought all Gicar pids have to use the > external SSR to control the boilers due to the amp requirement? > > > > > On 22 August 2014 15:08, John Brinkman <[email protected]> wrote: >> >> Thanks Michael >> >> what a coincidence, I have one of those on order from eBay already as >> I am building a sous-vide cooker for home using it :-) >> >> The one they gave me however is a 90-240AC input voltage, so I am >> assuming that they connected it to the PID instead of the element >> connection somehow. Just not sure exactly how to do it and don't want >> to blow things up messing with the 220V if I don't know what I am >> doing. >> >> JohnB >> >> On Fri, Aug 22, 2014 at 2:21 PM, Michael Endacott >> <[email protected]> wrote: >> > This is the one I bought when I upgraded to Gicar PID and SSR >> > >> > >> > http://www.ebay.co.uk/itm/400380577295?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT >> > >> > Key spec is >> > >> > Items: Solid State Relay >> > >> > Model: SSR-25 AA >> > >> > Input voltage: 80-250VAC >> > >> > Output voltage: 24-380VAC >> > >> > Output current: 25A >> > >> > Working voltage: 250V >> > >> > >> > >> > On 22 August 2014 12:54, John Brinkman <[email protected]> wrote: >> >> >> >> They gave me a Crouzet SSR, I believe this is the one that is supplied >> >> by WLL as well. >> >> >> >> Does anyone have the WLL installation sheet? >> >> >> >> JohnB >> >> >> >> On Fri, Aug 22, 2014 at 1:34 PM, John Brinkman >> >> <[email protected]> >> >> wrote: >> >> > Interesting, I went to the suppliers to pick up a replacment Gicar >> >> > PID >> >> > and they advised that I install an external SSR as well to take over >> >> > from the one in the PID. >> >> > >> >> > Unfortunately non of their techies were there so not sure exactly how >> >> > to install it. Also trying to work out if I can just desolder the >> >> > faulty SSR on the existing one and wire in the new one for that (much >> >> > bigger than the small existing chip) >> >> > >> >> > Any suggestions? >> >> > >> >> > JohnB >> >> > >> >> > On Fri, Aug 22, 2014 at 8:33 AM, John Brinkman >> >> > <[email protected]> >> >> > wrote: >> >> >> Ahhh, will take it apart and have a look Graeme. >> >> >> >> >> >> Thanks for the suggestion. >> >> >> >> >> >> JohnB >> >> >> >> >> >> On Fri, Aug 22, 2014 at 4:17 AM, Graeme Burton >> >> >> <[email protected]> >> >> >> wrote: >> >> >>> Hi John, I think all b3 came with an external ssr in Australia. >> >> >>> You >> >> >>> may be able to replace the relay in the PID if you can find one >> >> >>> that matches >> >> >>> the pcb holes. >> >> >>> >> >> >>> Graeme >> >> >>> Original Message >> >> >>> From: John Brinkman >> >> >>> Sent: Friday, 22 August 2014 01:21 >> >> >>> To: [email protected] >> >> >>> Reply To: [email protected] >> >> >>> Subject: Re: Suspected Brew Group Boiler Element >> >> >>> >> >> >>> I think you are right Graeme, any way to fix a faulty relay in the >> >> >>> PID >> >> >>> or must I just replace? >> >> >>> >> >> >>> When I spoke to the local agent they said that they are installing >> >> >>> an >> >> >>> external SSR on the PID's as they have had quite a lot of them >> >> >>> failing. >> >> >>> >> >> >>> JohnB >> >> >>> >> >> >>> >> >> >>> >> >> >>> On Thu, Aug 21, 2014 at 4:37 PM, Graeme Burton >> >> >>> <[email protected]> wrote: >> >> >>>> Sounds more like a u/s solid state relay - sticking off and on? >> >> >>>> Could >> >> >>>> also be the relay in the pid controller sticking. >> >> >>>> >> >> >>>> Graeme >> >> >>>> Original Message >> >> >>>> From: John Brinkman >> >> >>>> Sent: Thursday, 21 August 2014 22:26 >> >> >>>> To: [email protected] >> >> >>>> Reply To: [email protected] >> >> >>>> Subject: Suspected Brew Group Boiler Element >> >> >>>> >> >> >>>> Hi Guys >> >> >>>> >> >> >>>> I have a Brewtus III PID with a rotary pump/ >> >> >>>> >> >> >>>> Woke up this morning to my brew group boiler showing 99C, started >> >> >>>> pulling a shot to check and was flash steaming as the water came >> >> >>>> out >> >> >>>> so suspect the reading was correct (set temp is 90c). >> >> >>>> >> >> >>>> Pulled some water through it for about 60 seconds and the temp >> >> >>>> started >> >> >>>> dropping. I switched my machine off left it for about 30 minutes >> >> >>>> and >> >> >>>> switched it on again. Steam pressure came up and the light for the >> >> >>>> steam boiler went of, brew temp was sitting at 70c and the light >> >> >>>> on >> >> >>>> the PID was indicating that it was powering the brew element but >> >> >>>> there >> >> >>>> is no rise in temp. I switched the machine off altogether and left >> >> >>>> it >> >> >>>> the whole day, brew temp has dropped down to 30c when I switch it >> >> >>>> on >> >> >>>> and does not rise at all. >> >> >>>> >> >> >>>> Would I be correct in assuming that this is probably a faulty brew >> >> >>>> group element? >> >> >>>> Anything else I should heck before dismantelling? >> >> >>>> >> >> >>>> Thanks JohnB >> >> >>>> >> >> >>>> -- >> >> >>>> You received this message because you are subscribed to the Google >> >> >>>> Groups "Brewtus" group. >> >> >>>> To unsubscribe from this group and stop receiving emails from it, >> >> >>>> send an email to [email protected]. >> >> >>>> To post to this group, send email to [email protected]. >> >> >>>> Visit this group at http://groups.google.com/group/brewtus. >> >> >>>> For more options, visit https://groups.google.com/d/optout. >> >> >>>> >> >> >>>> -- >> >> >>>> You received this message because you are subscribed to the Google >> >> >>>> Groups "Brewtus" group. >> >> >>>> To unsubscribe from this group and stop receiving emails from it, >> >> >>>> send an email to [email protected]. >> >> >>>> To post to this group, send email to [email protected]. >> >> >>>> Visit this group at http://groups.google.com/group/brewtus. >> >> >>>> For more options, visit https://groups.google.com/d/optout. >> >> >>> >> >> >>> -- >> >> >>> You received this message because you are subscribed to the Google >> >> >>> Groups "Brewtus" group. >> >> >>> To unsubscribe from this group and stop receiving emails from it, >> >> >>> send >> >> >>> an email to [email protected]. >> >> >>> To post to this group, send email to [email protected]. >> >> >>> Visit this group at http://groups.google.com/group/brewtus. >> >> >>> For more options, visit https://groups.google.com/d/optout. >> >> >>> >> >> >>> -- >> >> >>> You received this message because you are subscribed to the Google >> >> >>> Groups "Brewtus" group. >> >> >>> To unsubscribe from this group and stop receiving emails from it, >> >> >>> send >> >> >>> an email to [email protected]. >> >> >>> To post to this group, send email to [email protected]. >> >> >>> Visit this group at http://groups.google.com/group/brewtus. >> >> >>> For more options, visit https://groups.google.com/d/optout. >> >> >> >> -- >> >> You received this message because you are subscribed to the Google >> >> Groups >> >> "Brewtus" group. >> >> To unsubscribe from this group and stop receiving emails from it, send >> >> an >> >> email to [email protected]. >> >> To post to this group, send email to [email protected]. >> >> Visit this group at http://groups.google.com/group/brewtus. >> >> For more options, visit https://groups.google.com/d/optout. >> > >> > >> > >> > >> > -- >> > >> > Mike >> > >> > -- >> > You received this message because you are subscribed to the Google >> > Groups >> > "Brewtus" group. >> > To unsubscribe from this group and stop receiving emails from it, send >> > an >> > email to [email protected]. >> > To post to this group, send email to [email protected]. >> > Visit this group at http://groups.google.com/group/brewtus. >> > For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Brewtus" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at http://groups.google.com/group/brewtus. >> For more options, visit https://groups.google.com/d/optout. > > > > > -- > > Mike > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
