Can't tell based on this config alone. can you please show the full
config? (at least the one of the Serialx/y:z (the D-channel), any dialer
interfaces and the "line" config at the end)?
http://www.cisco.com/en/US/products/hw/univgate/ps505/products_configura
tion_example09186a0080094a49.shtml shows a sample AS5xxx config, which
can easily be adapted to your environment..
oli
Mad Unix <> wrote on Wednesday, July 09, 2008 8:27 AM:
> have a PRI connecting 60 ppl using BRI and Analog calls
> the Router 3800 PRI interface is having Digital modem to accept
> analog phone calls
> the analog callers cant connect!
> What could be wrong?
>
> interface Group-Async1
> description connected tp Dial-in pcs (Analog)
> ip unnumbered GigabitEthernet0/0
> encapsulation ppp
> no ip split-horizon
> dialer in-band
> dialer idle-timeout 3600
> dialer-group 1
> async mode interactive
> peer default ip address pool cisco3662-group-2
> no fair-queue
> ppp authentication chap pap ms-chap callin
> group-range 0/450 0/473
> --
> madunix
> _______________________________________________
> cisco-nsp mailing list [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
