it works now added the following: aaa session-id common
no network-clock-participate slot 3 network-clock-participate slot 4 network-clock-select 1 E1 4/0 network-clock-select 2 E1 4/1 Thanks On Sat, Jul 12, 2008 at 1:59 PM, Oliver Boehmer (oboehmer) < [EMAIL PROTECTED]> wrote: > Hi, > > I am sorry, but I do not know how to help you if you don't provide more > details about the problem. Do the modem train up, i.e. do you get a connect? > If not, please check the modem troubleshooting link below. If you have > problems during PPP or authentication, please check the other link I've > provided to guide you through the process. > > oli > > ------------------------------ > *From:* Mad Unix [mailto:[EMAIL PROTECTED] > *Sent:* Saturday, July 12, 2008 1:31 PM > > *To:* Oliver Boehmer (oboehmer) > *Cc:* [email protected] > *Subject:* Re: [c-nsp] Analog Dialer > > > till now am not able to accept analog calls through my PRI! > > any help > > >> >> On Wed, Jul 9, 2008 at 1:09 PM, Oliver Boehmer (oboehmer) < >> [EMAIL PROTECTED]> wrote: >> >>> Hmm, so how far does the connection go? Do the modems train up? You >>> might want to go through >>> http://www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a0080094eb9.shtmlor >>> http://www.cisco.com/en/US/tech/tk713/tk507/technologies_tech_note09186a008019cfa7.shtml >>> >>> oli >>> >>> ------------------------------ >>> *From:* Mad Unix [mailto:[EMAIL PROTECTED] >>> *Sent:* Wednesday, July 09, 2008 11:25 AM >>> >>> *To:* Oliver Boehmer (oboehmer) >>> *Cc:* [email protected] >>> *Subject:* Re: [c-nsp] Analog Dialer >>> >>> I have added this but it didnt help it keeps trying to connect to >>> authenticate then failed >>> >>> SDC_R2#conf t >>> Enter configuration commands, one per line. End with CNTL/Z. >>> SDC_R2(config)#line 450 473 >>> SDC_R2(config-line)#exec-timeout 0 0 >>> SDC_R2(config-line)#modem Dialin >>> SDC_R2(config-line)#transport input all >>> SDC_R2(config-line)#autoselect during-login >>> SDC_R2(config-line)#autoselect ppp >>> SDC_R2(config-line)# >>> SDC_R2(config-line)#exit >>> SDC_R2(config)#exit >>> >>> >>> SDC_R2#sh line >>> Tty Line Typ Tx/Rx A Modem Roty AccO AccI Uses Noise >>> Overruns Int >>> 0 0 CTY - - - - - 1 0 >>> 0/0 - >>> Ready >>> 1 1 AUX 9600/9600 - - - - - 0 0 >>> 0/0 - >>> Ready >>> I 0/450 450 TTY - DialIn - - - 0 0 >>> 0/0 - >>> Idle >>> I 0/451 451 TTY - DialIn - - - 0 0 >>> 0/0 - >>> Idle >>> I 0/452 452 TTY - DialIn - - - 0 0 >>> 0/0 - >>> Idle >>> I 0/453 453 TTY - DialIn - - - 0 0 >>> 0/0 - >>> Idle >>> I 0/454 454 TTY - DialIn - - - 0 0 >>> 0/0 - >>> Idle >>> I 0/455 455 TTY - DialIn - - - 0 0 >>> 0/0 - >>> Idle >>> I 0/456 456 TTY - DialIn - - - 0 0 >>> 0/0 - >>> Idle >>> I 0/457 457 TTY - DialIn - - - 0 0 >>> 0/0 - >>> Idle >>> I 0/458 458 TTY - DialIn - - - 0 0 >>> 0/0 - >>> Idle >>> I 0/459 459 TTY - DialIn - - - 0 0 >>> 0/0 - >>> Idle >>> I 0/460 460 TTY - DialIn - - - 0 0 >>> 0/0 - >>> Idle >>> I 0/461 461 TTY - DialIn - - - 0 0 >>> 0/0 - >>> Idle >>> I 0/462 462 TTY - DialIn - - - 0 0 >>> 0/0 - >>> Idle >>> I 0/463 463 TTY - DialIn - - - 0 0 >>> 0/0 - >>> Idle >>> I 0/464 464 TTY - DialIn - - - 0 0 >>> 0/0 - >>> Idle >>> I 0/465 465 TTY - DialIn - - - 0 0 >>> 0/0 - >>> Idle >>> I 0/466 466 TTY - DialIn - - - 0 0 >>> 0/0 - >>> Idle >>> I 0/467 467 TTY - DialIn - - - 0 0 >>> 0/0 - >>> Idle >>> I 0/468 468 TTY - DialIn - - - 0 0 >>> 0/0 - >>> Idle >>> I 0/469 469 TTY - DialIn - - - 0 0 >>> 0/0 - >>> Idle >>> I 0/470 470 TTY - DialIn - - - 0 0 >>> 0/0 - >>> Idle >>> I 0/471 471 TTY - DialIn - - - 0 0 >>> 0/0 - >>> Idle >>> I 0/472 472 TTY - DialIn - - - 0 0 >>> 0/0 - >>> Idle >>> I 0/473 473 TTY - DialIn - - - 0 0 >>> 0/0 - >>> Idle >>> * 706 706 VTY - - - - - 50 0 >>> 0/0 - >>> Ready >>> * 707 707 VTY - - - - - 9 0 >>> 0/0 - >>> Ready >>> 708 708 VTY - - - - - 1 0 >>> 0/0 - >>> Ready >>> 709 709 VTY - - - - - 0 0 >>> 0/0 - >>> Idle >>> 710 710 VTY - - - - - 0 0 >>> 0/0 - >>> Idle >>> >>> Line(s) not in async mode -or- with no hardware support: >>> 2-449, 474-705 >>> >>> >>> >>> regarding the CEF we have disabled becuase it was disconnecting the >>> Dialer after atime... >>> so we added this no ip route-cache cef >>> >>> interface Serial4/0:15 >>> no ip address >>> encapsulation ppp >>> no ip route-cache cef >>> dialer rotary-group 1 >>> dialer-group 2 >>> isdn switch-type primary-net5 >>> isdn incoming-voice modem >>> isdn guard-timer 3000 >>> ! >>> interface Serial4/1:15 >>> no ip address >>> encapsulation ppp >>> no ip route-cache cef >>> dialer rotary-group 1 >>> dialer-group 1 >>> isdn switch-type primary-net5 >>> isdn incoming-voice modem >>> isdn guard-timer 3000 >>> ! >>> >>> >>> On Wed, Jul 9, 2008 at 11:05 AM, Oliver Boehmer (oboehmer) < >>> [EMAIL PROTECTED]> wrote: >>> >>>> some patience, please :-) .. we all do this in our spare time.. >>>> >>>> The "line" config is missing (i.e. the lower part of the config). can >>>> you send this as well? >>>> Please re-enable CEF on the serial interface ("ip route-cache cef") >>>> >>>> oli >>>> >>>> ------------------------------ >>>> *From:* Mad Unix [mailto:[EMAIL PROTECTED] >>>> *Sent:* Wednesday, July 09, 2008 10:31 AM >>>> *To:* Oliver Boehmer (oboehmer) >>>> *Cc:* [email protected] >>>> *Subject:* Re: [c-nsp] Analog Dialer >>>> >>>> Any updates >>>> >>>> On Wed, Jul 9, 2008 at 9:05 AM, Mad Unix <[EMAIL PROTECTED]> wrote: >>>> >>>>> Am using interface Group-Async1 to accept analog calls for data >>>>> transfer >>>>> >>>>> >>>>> interface GigabitEthernet0/0 >>>>> description $ES_LAN$ >>>>> ip address 10.16.0.2 255.255.255.0 >>>>> duplex auto >>>>> speed auto >>>>> media-type rj45 >>>>> ! >>>>> interface GigabitEthernet0/1 >>>>> ip address 10.16.1.2 255.255.255.0 >>>>> duplex auto >>>>> speed auto >>>>> media-type rj45 >>>>> ! >>>>> interface Serial0/0/0 >>>>> description ---- Elect ---- >>>>> ip address 10.14.11.5 255.255.255.252 >>>>> ! >>>>> interface Serial0/0/1 >>>>> description --- Bank --- >>>>> ip address 10.14.11.1 255.255.255.252 >>>>> encapsulation ppp >>>>> >>>>> interface Serial4/0:15 >>>>> no ip address >>>>> encapsulation ppp >>>>> no ip route-cache cef >>>>> dialer rotary-group 1 >>>>> dialer-group 2 >>>>> isdn switch-type primary-net5 >>>>> isdn incoming-voice modem >>>>> isdn guard-timer 3000 >>>>> ! >>>>> interface Serial4/1:15 >>>>> no ip address >>>>> encapsulation ppp >>>>> no ip route-cache cef >>>>> dialer rotary-group 1 >>>>> dialer-group 1 >>>>> isdn switch-type primary-net5 >>>>> isdn incoming-voice modem >>>>> isdn guard-timer 3000 >>>>> ! >>>>> interface Dialer1 >>>>> description connected to Dial-inPCs(ISDN) >>>>> ip address 10.13.1.1 255.255.255.0 >>>>> encapsulation ppp >>>>> no ip split-horizon >>>>> dialer in-band >>>>> dialer idle-timeout 3600 >>>>> dialer-group 1 >>>>> peer default ip address pool Cisco3662-Group-1 >>>>> ppp authentication chap pap ms-chap callin >>>>> ! >>>>> interface Group-Async1 >>>>> description connected tp Dial-in pcs (Analog) >>>>> ip unnumbered GigabitEthernet0/0 >>>>> encapsulation ppp >>>>> no ip split-horizon >>>>> dialer in-band >>>>> dialer idle-timeout 3600 >>>>> dialer-group 1 >>>>> async mode interactive >>>>> peer default ip address pool cisco3662-group-2 >>>>> no fair-queue >>>>> ppp authentication chap pap ms-chap callin >>>>> group-range 0/450 0/473 >>>>> ip http server >>>>> ip http authentication local >>>>> ip http timeout-policy idle 60 life 86400 requests 10000 >>>>> ! >>>>> ip radius source-interface GigabitEthernet0/0 >>>>> access-list 2 permit 10.5.0.0 0.0.255.255 >>>>> access-list 100 permit ip 10.4.0.0 0.0.255.255 10.13.0.0 0.0.255.255 >>>>> access-list 100 permit ip 10.5.0.0 0.0.255.255 10.13.0.0 0.0.255.255 >>>>> access-list 100 permit ip 10.5.0.0 0.0.255.255 10.0.0.0 0.255.255.255 >>>>> access-list 101 permit tcp host 10.5.3.10 any eq telnet >>>>> dialer-list 1 protocol ip permit >>>>> dialer-list 2 protocol ip permit >>>>> >>>>> >>>>> On Wed, Jul 9, 2008 at 8:39 AM, Oliver Boehmer (oboehmer) < >>>>> [EMAIL PROTECTED]> wrote: >>>>> >>>>>> Can't tell based on this config alone. can you please show the full >>>>>> config? (at least the one of the Serialx/y:z (the D-channel), any >>>>>> dialer >>>>>> interfaces and the "line" config at the end)? >>>>>> >>>>>> http://www.cisco.com/en/US/products/hw/univgate/ps505/products_configura >>>>>> tion_example09186a0080094a49.shtml shows a sample AS5xxx config, >>>>>> which >>>>>> can easily be adapted to your environment.. >>>>>> >>>>>> oli >>>>>> >>>>>> >>>>>> Mad Unix <> wrote on Wednesday, July 09, 2008 8:27 AM: >>>>>> >>>>>> > have a PRI connecting 60 ppl using BRI and Analog calls >>>>>> > the Router 3800 PRI interface is having Digital modem to accept >>>>>> > analog phone calls >>>>>> > the analog callers cant connect! >>>>>> > What could be wrong? >>>>>> > >>>>>> > interface Group-Async1 >>>>>> > description connected tp Dial-in pcs (Analog) >>>>>> > ip unnumbered GigabitEthernet0/0 >>>>>> > encapsulation ppp >>>>>> > no ip split-horizon >>>>>> > dialer in-band >>>>>> > dialer idle-timeout 3600 >>>>>> > dialer-group 1 >>>>>> > async mode interactive >>>>>> > peer default ip address pool cisco3662-group-2 >>>>>> > no fair-queue >>>>>> > ppp authentication chap pap ms-chap callin >>>>>> > group-range 0/450 0/473 >>>>>> > -- >>>>>> > madunix >>>>>> > _______________________________________________ >>>>>> > cisco-nsp mailing list [email protected] >>>>>> > https://puck.nether.net/mailman/listinfo/cisco-nsp >>>>>> > archive at http://puck.nether.net/pipermail/cisco-nsp/ >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> madunix >>>> >>>> >>>> >>>> >>>> -- >>>> madunix >>>> >>> >>> >>> >>> -- >>> madunix >>> >> >> >> >> -- >> madunix > > > > > -- > madunix > -- madunix _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
