till now am not able to accept analog calls through my PRI! any help
> > On Wed, Jul 9, 2008 at 1:09 PM, Oliver Boehmer (oboehmer) < > [EMAIL PROTECTED]> wrote: > >> Hmm, so how far does the connection go? Do the modems train up? You >> might want to go through >> http://www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a0080094eb9.shtmlor >> http://www.cisco.com/en/US/tech/tk713/tk507/technologies_tech_note09186a008019cfa7.shtml >> >> oli >> >> ------------------------------ >> *From:* Mad Unix [mailto:[EMAIL PROTECTED] >> *Sent:* Wednesday, July 09, 2008 11:25 AM >> >> *To:* Oliver Boehmer (oboehmer) >> *Cc:* [email protected] >> *Subject:* Re: [c-nsp] Analog Dialer >> >> I have added this but it didnt help it keeps trying to connect to >> authenticate then failed >> >> SDC_R2#conf t >> Enter configuration commands, one per line. End with CNTL/Z. >> SDC_R2(config)#line 450 473 >> SDC_R2(config-line)#exec-timeout 0 0 >> SDC_R2(config-line)#modem Dialin >> SDC_R2(config-line)#transport input all >> SDC_R2(config-line)#autoselect during-login >> SDC_R2(config-line)#autoselect ppp >> SDC_R2(config-line)# >> SDC_R2(config-line)#exit >> SDC_R2(config)#exit >> >> >> SDC_R2#sh line >> Tty Line Typ Tx/Rx A Modem Roty AccO AccI Uses Noise >> Overruns Int >> 0 0 CTY - - - - - 1 0 >> 0/0 - >> Ready >> 1 1 AUX 9600/9600 - - - - - 0 0 >> 0/0 - >> Ready >> I 0/450 450 TTY - DialIn - - - 0 0 >> 0/0 - >> Idle >> I 0/451 451 TTY - DialIn - - - 0 0 >> 0/0 - >> Idle >> I 0/452 452 TTY - DialIn - - - 0 0 >> 0/0 - >> Idle >> I 0/453 453 TTY - DialIn - - - 0 0 >> 0/0 - >> Idle >> I 0/454 454 TTY - DialIn - - - 0 0 >> 0/0 - >> Idle >> I 0/455 455 TTY - DialIn - - - 0 0 >> 0/0 - >> Idle >> I 0/456 456 TTY - DialIn - - - 0 0 >> 0/0 - >> Idle >> I 0/457 457 TTY - DialIn - - - 0 0 >> 0/0 - >> Idle >> I 0/458 458 TTY - DialIn - - - 0 0 >> 0/0 - >> Idle >> I 0/459 459 TTY - DialIn - - - 0 0 >> 0/0 - >> Idle >> I 0/460 460 TTY - DialIn - - - 0 0 >> 0/0 - >> Idle >> I 0/461 461 TTY - DialIn - - - 0 0 >> 0/0 - >> Idle >> I 0/462 462 TTY - DialIn - - - 0 0 >> 0/0 - >> Idle >> I 0/463 463 TTY - DialIn - - - 0 0 >> 0/0 - >> Idle >> I 0/464 464 TTY - DialIn - - - 0 0 >> 0/0 - >> Idle >> I 0/465 465 TTY - DialIn - - - 0 0 >> 0/0 - >> Idle >> I 0/466 466 TTY - DialIn - - - 0 0 >> 0/0 - >> Idle >> I 0/467 467 TTY - DialIn - - - 0 0 >> 0/0 - >> Idle >> I 0/468 468 TTY - DialIn - - - 0 0 >> 0/0 - >> Idle >> I 0/469 469 TTY - DialIn - - - 0 0 >> 0/0 - >> Idle >> I 0/470 470 TTY - DialIn - - - 0 0 >> 0/0 - >> Idle >> I 0/471 471 TTY - DialIn - - - 0 0 >> 0/0 - >> Idle >> I 0/472 472 TTY - DialIn - - - 0 0 >> 0/0 - >> Idle >> I 0/473 473 TTY - DialIn - - - 0 0 >> 0/0 - >> Idle >> * 706 706 VTY - - - - - 50 0 >> 0/0 - >> Ready >> * 707 707 VTY - - - - - 9 0 >> 0/0 - >> Ready >> 708 708 VTY - - - - - 1 0 >> 0/0 - >> Ready >> 709 709 VTY - - - - - 0 0 >> 0/0 - >> Idle >> 710 710 VTY - - - - - 0 0 >> 0/0 - >> Idle >> >> Line(s) not in async mode -or- with no hardware support: >> 2-449, 474-705 >> >> >> >> regarding the CEF we have disabled becuase it was disconnecting the Dialer >> after atime... >> so we added this no ip route-cache cef >> >> interface Serial4/0:15 >> no ip address >> encapsulation ppp >> no ip route-cache cef >> dialer rotary-group 1 >> dialer-group 2 >> isdn switch-type primary-net5 >> isdn incoming-voice modem >> isdn guard-timer 3000 >> ! >> interface Serial4/1:15 >> no ip address >> encapsulation ppp >> no ip route-cache cef >> dialer rotary-group 1 >> dialer-group 1 >> isdn switch-type primary-net5 >> isdn incoming-voice modem >> isdn guard-timer 3000 >> ! >> >> >> On Wed, Jul 9, 2008 at 11:05 AM, Oliver Boehmer (oboehmer) < >> [EMAIL PROTECTED]> wrote: >> >>> some patience, please :-) .. we all do this in our spare time.. >>> >>> The "line" config is missing (i.e. the lower part of the config). can you >>> send this as well? >>> Please re-enable CEF on the serial interface ("ip route-cache cef") >>> >>> oli >>> >>> ------------------------------ >>> *From:* Mad Unix [mailto:[EMAIL PROTECTED] >>> *Sent:* Wednesday, July 09, 2008 10:31 AM >>> *To:* Oliver Boehmer (oboehmer) >>> *Cc:* [email protected] >>> *Subject:* Re: [c-nsp] Analog Dialer >>> >>> Any updates >>> >>> On Wed, Jul 9, 2008 at 9:05 AM, Mad Unix <[EMAIL PROTECTED]> wrote: >>> >>>> Am using interface Group-Async1 to accept analog calls for data transfer >>>> >>>> >>>> interface GigabitEthernet0/0 >>>> description $ES_LAN$ >>>> ip address 10.16.0.2 255.255.255.0 >>>> duplex auto >>>> speed auto >>>> media-type rj45 >>>> ! >>>> interface GigabitEthernet0/1 >>>> ip address 10.16.1.2 255.255.255.0 >>>> duplex auto >>>> speed auto >>>> media-type rj45 >>>> ! >>>> interface Serial0/0/0 >>>> description ---- Elect ---- >>>> ip address 10.14.11.5 255.255.255.252 >>>> ! >>>> interface Serial0/0/1 >>>> description --- Bank --- >>>> ip address 10.14.11.1 255.255.255.252 >>>> encapsulation ppp >>>> >>>> interface Serial4/0:15 >>>> no ip address >>>> encapsulation ppp >>>> no ip route-cache cef >>>> dialer rotary-group 1 >>>> dialer-group 2 >>>> isdn switch-type primary-net5 >>>> isdn incoming-voice modem >>>> isdn guard-timer 3000 >>>> ! >>>> interface Serial4/1:15 >>>> no ip address >>>> encapsulation ppp >>>> no ip route-cache cef >>>> dialer rotary-group 1 >>>> dialer-group 1 >>>> isdn switch-type primary-net5 >>>> isdn incoming-voice modem >>>> isdn guard-timer 3000 >>>> ! >>>> interface Dialer1 >>>> description connected to Dial-inPCs(ISDN) >>>> ip address 10.13.1.1 255.255.255.0 >>>> encapsulation ppp >>>> no ip split-horizon >>>> dialer in-band >>>> dialer idle-timeout 3600 >>>> dialer-group 1 >>>> peer default ip address pool Cisco3662-Group-1 >>>> ppp authentication chap pap ms-chap callin >>>> ! >>>> interface Group-Async1 >>>> description connected tp Dial-in pcs (Analog) >>>> ip unnumbered GigabitEthernet0/0 >>>> encapsulation ppp >>>> no ip split-horizon >>>> dialer in-band >>>> dialer idle-timeout 3600 >>>> dialer-group 1 >>>> async mode interactive >>>> peer default ip address pool cisco3662-group-2 >>>> no fair-queue >>>> ppp authentication chap pap ms-chap callin >>>> group-range 0/450 0/473 >>>> ip http server >>>> ip http authentication local >>>> ip http timeout-policy idle 60 life 86400 requests 10000 >>>> ! >>>> ip radius source-interface GigabitEthernet0/0 >>>> access-list 2 permit 10.5.0.0 0.0.255.255 >>>> access-list 100 permit ip 10.4.0.0 0.0.255.255 10.13.0.0 0.0.255.255 >>>> access-list 100 permit ip 10.5.0.0 0.0.255.255 10.13.0.0 0.0.255.255 >>>> access-list 100 permit ip 10.5.0.0 0.0.255.255 10.0.0.0 0.255.255.255 >>>> access-list 101 permit tcp host 10.5.3.10 any eq telnet >>>> dialer-list 1 protocol ip permit >>>> dialer-list 2 protocol ip permit >>>> >>>> >>>> On Wed, Jul 9, 2008 at 8:39 AM, Oliver Boehmer (oboehmer) < >>>> [EMAIL PROTECTED]> wrote: >>>> >>>>> Can't tell based on this config alone. can you please show the full >>>>> config? (at least the one of the Serialx/y:z (the D-channel), any >>>>> dialer >>>>> interfaces and the "line" config at the end)? >>>>> >>>>> http://www.cisco.com/en/US/products/hw/univgate/ps505/products_configura >>>>> tion_example09186a0080094a49.shtml<http://www.cisco.com/en/US/products/hw/univgate/ps505/products_configuration_example09186a0080094a49.shtml>shows >>>>> a sample AS5xxx config, which >>>>> can easily be adapted to your environment.. >>>>> >>>>> oli >>>>> >>>>> >>>>> Mad Unix <> wrote on Wednesday, July 09, 2008 8:27 AM: >>>>> >>>>> > have a PRI connecting 60 ppl using BRI and Analog calls >>>>> > the Router 3800 PRI interface is having Digital modem to accept >>>>> > analog phone calls >>>>> > the analog callers cant connect! >>>>> > What could be wrong? >>>>> > >>>>> > interface Group-Async1 >>>>> > description connected tp Dial-in pcs (Analog) >>>>> > ip unnumbered GigabitEthernet0/0 >>>>> > encapsulation ppp >>>>> > no ip split-horizon >>>>> > dialer in-band >>>>> > dialer idle-timeout 3600 >>>>> > dialer-group 1 >>>>> > async mode interactive >>>>> > peer default ip address pool cisco3662-group-2 >>>>> > no fair-queue >>>>> > ppp authentication chap pap ms-chap callin >>>>> > group-range 0/450 0/473 >>>>> > -- >>>>> > madunix >>>>> > _______________________________________________ >>>>> > cisco-nsp mailing list [email protected] >>>>> > https://puck.nether.net/mailman/listinfo/cisco-nsp >>>>> > archive at http://puck.nether.net/pipermail/cisco-nsp/ >>>>> >>>> >>>> >>>> >>>> -- >>>> madunix >>> >>> >>> >>> >>> -- >>> madunix >>> >> >> >> >> -- >> madunix >> > > > > -- > madunix -- madunix _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
