Am using interface Group-Async1 to accept analog calls for data transfer
interface GigabitEthernet0/0 description $ES_LAN$ ip address 10.16.0.2 255.255.255.0 duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/1 ip address 10.16.1.2 255.255.255.0 duplex auto speed auto media-type rj45 ! interface Serial0/0/0 description ---- Elect ---- ip address 10.14.11.5 255.255.255.252 ! interface Serial0/0/1 description --- Bank --- ip address 10.14.11.1 255.255.255.252 encapsulation ppp interface Serial4/0:15 no ip address encapsulation ppp no ip route-cache cef dialer rotary-group 1 dialer-group 2 isdn switch-type primary-net5 isdn incoming-voice modem isdn guard-timer 3000 ! interface Serial4/1:15 no ip address encapsulation ppp no ip route-cache cef dialer rotary-group 1 dialer-group 1 isdn switch-type primary-net5 isdn incoming-voice modem isdn guard-timer 3000 ! interface Dialer1 description connected to Dial-inPCs(ISDN) ip address 10.13.1.1 255.255.255.0 encapsulation ppp no ip split-horizon dialer in-band dialer idle-timeout 3600 dialer-group 1 peer default ip address pool Cisco3662-Group-1 ppp authentication chap pap ms-chap callin ! interface Group-Async1 description connected tp Dial-in pcs (Analog) ip unnumbered GigabitEthernet0/0 encapsulation ppp no ip split-horizon dialer in-band dialer idle-timeout 3600 dialer-group 1 async mode interactive peer default ip address pool cisco3662-group-2 no fair-queue ppp authentication chap pap ms-chap callin group-range 0/450 0/473 ip http server ip http authentication local ip http timeout-policy idle 60 life 86400 requests 10000 ! ip radius source-interface GigabitEthernet0/0 access-list 2 permit 10.5.0.0 0.0.255.255 access-list 100 permit ip 10.4.0.0 0.0.255.255 10.13.0.0 0.0.255.255 access-list 100 permit ip 10.5.0.0 0.0.255.255 10.13.0.0 0.0.255.255 access-list 100 permit ip 10.5.0.0 0.0.255.255 10.0.0.0 0.255.255.255 access-list 101 permit tcp host 10.5.3.10 any eq telnet dialer-list 1 protocol ip permit dialer-list 2 protocol ip permit On Wed, Jul 9, 2008 at 8:39 AM, Oliver Boehmer (oboehmer) < [EMAIL PROTECTED]> wrote: > Can't tell based on this config alone. can you please show the full > config? (at least the one of the Serialx/y:z (the D-channel), any dialer > interfaces and the "line" config at the end)? > http://www.cisco.com/en/US/products/hw/univgate/ps505/products_configura > tion_example09186a0080094a49.shtml<http://www.cisco.com/en/US/products/hw/univgate/ps505/products_configuration_example09186a0080094a49.shtml>shows > a sample AS5xxx config, which > can easily be adapted to your environment.. > > oli > > > Mad Unix <> wrote on Wednesday, July 09, 2008 8:27 AM: > > > have a PRI connecting 60 ppl using BRI and Analog calls > > the Router 3800 PRI interface is having Digital modem to accept > > analog phone calls > > the analog callers cant connect! > > What could be wrong? > > > > interface Group-Async1 > > description connected tp Dial-in pcs (Analog) > > ip unnumbered GigabitEthernet0/0 > > encapsulation ppp > > no ip split-horizon > > dialer in-band > > dialer idle-timeout 3600 > > dialer-group 1 > > async mode interactive > > peer default ip address pool cisco3662-group-2 > > no fair-queue > > ppp authentication chap pap ms-chap callin > > group-range 0/450 0/473 > > -- > > madunix > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > -- madunix _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
