Any updates On Wed, Jul 9, 2008 at 9:05 AM, Mad Unix <[EMAIL PROTECTED]> wrote:
> Am using interface Group-Async1 to accept analog calls for data transfer > > > interface GigabitEthernet0/0 > description $ES_LAN$ > ip address 10.16.0.2 255.255.255.0 > duplex auto > speed auto > media-type rj45 > ! > interface GigabitEthernet0/1 > ip address 10.16.1.2 255.255.255.0 > duplex auto > speed auto > media-type rj45 > ! > interface Serial0/0/0 > description ---- Elect ---- > ip address 10.14.11.5 255.255.255.252 > ! > interface Serial0/0/1 > description --- Bank --- > ip address 10.14.11.1 255.255.255.252 > encapsulation ppp > > interface Serial4/0:15 > no ip address > encapsulation ppp > no ip route-cache cef > dialer rotary-group 1 > dialer-group 2 > isdn switch-type primary-net5 > isdn incoming-voice modem > isdn guard-timer 3000 > ! > interface Serial4/1:15 > no ip address > encapsulation ppp > no ip route-cache cef > dialer rotary-group 1 > dialer-group 1 > isdn switch-type primary-net5 > isdn incoming-voice modem > isdn guard-timer 3000 > ! > interface Dialer1 > description connected to Dial-inPCs(ISDN) > ip address 10.13.1.1 255.255.255.0 > encapsulation ppp > no ip split-horizon > dialer in-band > dialer idle-timeout 3600 > dialer-group 1 > peer default ip address pool Cisco3662-Group-1 > ppp authentication chap pap ms-chap callin > ! > interface Group-Async1 > description connected tp Dial-in pcs (Analog) > ip unnumbered GigabitEthernet0/0 > encapsulation ppp > no ip split-horizon > dialer in-band > dialer idle-timeout 3600 > dialer-group 1 > async mode interactive > peer default ip address pool cisco3662-group-2 > no fair-queue > ppp authentication chap pap ms-chap callin > group-range 0/450 0/473 > ip http server > ip http authentication local > ip http timeout-policy idle 60 life 86400 requests 10000 > ! > ip radius source-interface GigabitEthernet0/0 > access-list 2 permit 10.5.0.0 0.0.255.255 > access-list 100 permit ip 10.4.0.0 0.0.255.255 10.13.0.0 0.0.255.255 > access-list 100 permit ip 10.5.0.0 0.0.255.255 10.13.0.0 0.0.255.255 > access-list 100 permit ip 10.5.0.0 0.0.255.255 10.0.0.0 0.255.255.255 > access-list 101 permit tcp host 10.5.3.10 any eq telnet > dialer-list 1 protocol ip permit > dialer-list 2 protocol ip permit > > > On Wed, Jul 9, 2008 at 8:39 AM, Oliver Boehmer (oboehmer) < > [EMAIL PROTECTED]> wrote: > >> Can't tell based on this config alone. can you please show the full >> config? (at least the one of the Serialx/y:z (the D-channel), any dialer >> interfaces and the "line" config at the end)? >> http://www.cisco.com/en/US/products/hw/univgate/ps505/products_configura >> tion_example09186a0080094a49.shtml<http://www.cisco.com/en/US/products/hw/univgate/ps505/products_configuration_example09186a0080094a49.shtml>shows >> a sample AS5xxx config, which >> can easily be adapted to your environment.. >> >> oli >> >> >> Mad Unix <> wrote on Wednesday, July 09, 2008 8:27 AM: >> >> > have a PRI connecting 60 ppl using BRI and Analog calls >> > the Router 3800 PRI interface is having Digital modem to accept >> > analog phone calls >> > the analog callers cant connect! >> > What could be wrong? >> > >> > interface Group-Async1 >> > description connected tp Dial-in pcs (Analog) >> > ip unnumbered GigabitEthernet0/0 >> > encapsulation ppp >> > no ip split-horizon >> > dialer in-band >> > dialer idle-timeout 3600 >> > dialer-group 1 >> > async mode interactive >> > peer default ip address pool cisco3662-group-2 >> > no fair-queue >> > ppp authentication chap pap ms-chap callin >> > group-range 0/450 0/473 >> > -- >> > madunix >> > _______________________________________________ >> > cisco-nsp mailing list [email protected] >> > https://puck.nether.net/mailman/listinfo/cisco-nsp >> > archive at http://puck.nether.net/pipermail/cisco-nsp/ >> > > > > -- > madunix -- madunix _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
