some patience, please :-) .. we all do this in our spare time..
 
The "line" config is missing (i.e. the lower part of the config). can
you send this as well?
Please re-enable CEF on the serial interface ("ip route-cache cef")
 
    oli

________________________________

From: Mad Unix [mailto:[EMAIL PROTECTED] 
Sent: Wednesday, July 09, 2008 10:31 AM
To: Oliver Boehmer (oboehmer)
Cc: [email protected]
Subject: Re: [c-nsp] Analog Dialer


Any updates


On Wed, Jul 9, 2008 at 9:05 AM, Mad Unix <[EMAIL PROTECTED]> wrote:


        Am using interface Group-Async1 to accept analog calls for data
transfer
        
        
        interface GigabitEthernet0/0
         description $ES_LAN$
         ip address 10.16.0.2 255.255.255.0
         duplex auto
         speed auto
         media-type rj45
        !
        interface GigabitEthernet0/1
         ip address 10.16.1.2 255.255.255.0
         duplex auto
         speed auto
         media-type rj45
        !
        interface Serial0/0/0
         description ---- Elect  ----
         ip address 10.14.11.5 255.255.255.252
        !
        interface Serial0/0/1
         description ---  Bank ---
         ip address 10.14.11.1 255.255.255.252
         encapsulation ppp
        
        interface Serial4/0:15
         no ip address
         encapsulation ppp
         no ip route-cache cef
         dialer rotary-group 1
         dialer-group 2
         isdn switch-type primary-net5
         isdn incoming-voice modem
         isdn guard-timer 3000
        !
        interface Serial4/1:15
         no ip address
         encapsulation ppp
         no ip route-cache cef
         dialer rotary-group 1
         dialer-group 1
         isdn switch-type primary-net5
         isdn incoming-voice modem
         isdn guard-timer 3000
        !
        interface Dialer1
         description connected to Dial-inPCs(ISDN)
         ip address 10.13.1.1 255.255.255.0 

         encapsulation ppp
         no ip split-horizon
         dialer in-band
         dialer idle-timeout 3600
         dialer-group 1
        
         peer default ip address pool Cisco3662-Group-1 

         ppp authentication chap pap ms-chap callin
        !
        interface Group-Async1
         description connected tp Dial-in pcs (Analog)
         ip unnumbered GigabitEthernet0/0
         encapsulation ppp
         no ip split-horizon
         dialer in-band
         dialer idle-timeout 3600
         dialer-group 1
         async mode interactive
         peer default ip address pool cisco3662-group-2
         no fair-queue
         ppp authentication chap pap ms-chap callin
         group-range 0/450 0/473
        
        ip http server
        ip http authentication local
        ip http timeout-policy idle 60 life 86400 requests 10000
        !
        ip radius source-interface GigabitEthernet0/0 
        access-list 2 permit 10.5.0.0 0.0.255.255
        access-list 100 permit ip 10.4.0.0 0.0.255.255 10.13.0.0
0.0.255.255
        access-list 100 permit ip 10.5.0.0 0.0.255.255 10.13.0.0
0.0.255.255
        access-list 100 permit ip 10.5.0.0 0.0.255.255 10.0.0.0
0.255.255.255
        access-list 101 permit tcp host 10.5.3.10 any eq telnet
        dialer-list 1 protocol ip permit
        dialer-list 2 protocol ip permit 


        On Wed, Jul 9, 2008 at 8:39 AM, Oliver Boehmer (oboehmer)
<[EMAIL PROTECTED]> wrote:
        

                Can't tell based on this config alone. can you please
show the full
                config? (at least the one of the Serialx/y:z (the
D-channel), any dialer
                interfaces and the "line" config at the end)?
        
http://www.cisco.com/en/US/products/hw/univgate/ps505/products_configura
                tion_example09186a0080094a49.shtml
<http://www.cisco.com/en/US/products/hw/univgate/ps505/products_configur
ation_example09186a0080094a49.shtml>  shows a sample AS5xxx config,
which
                can easily be adapted to your environment..
                
                       oli
                
                
                Mad Unix <> wrote on Wednesday, July 09, 2008 8:27 AM:
                

                >  have a PRI connecting 60 ppl using BRI and Analog
calls
                > the Router 3800 PRI interface is having Digital modem
to accept
                > analog phone calls
                > the analog callers cant connect!
                > What could be wrong?
                >
                > interface Group-Async1
                >  description connected tp Dial-in pcs (Analog)
                >  ip unnumbered GigabitEthernet0/0
                >  encapsulation ppp
                >  no ip split-horizon
                >  dialer in-band
                >  dialer idle-timeout 3600
                >  dialer-group 1
                >  async mode interactive
                >  peer default ip address pool cisco3662-group-2
                >  no fair-queue
                >  ppp authentication chap pap ms-chap callin
                >  group-range 0/450 0/473
                > --
                > madunix
                
                > _______________________________________________
                > cisco-nsp mailing list  [email protected]
                > https://puck.nether.net/mailman/listinfo/cisco-nsp
                > archive at http://puck.nether.net/pipermail/cisco-nsp/
                




        -- 
        madunix 




-- 
madunix 
_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to