I have a 3560 and when do I "show platform tcam utilization" it says that I
have 1365 directly connected routes. This is definitely not the case and
when I do a "show ip route connected" there are various IP blocks shown, but
none longer than a /26 and maybe a total of 30 routes. Anyone know how
these numbers are computed?
#sh platform tcam utilization
CAM Utilization for ASIC# 0 Max Used
Masks/Values Masks/values
IPv4 unicast directly-connected routes: 2048/2048 1365/1365
IPv4 unicast indirectly-connected routes: 1024/1024 190/190
--
It has to start somewhere, it has to start sometime. What better place than
here? What better time than now?
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
