On Thu, Jan 20, 2011 at 01:07:41PM -0500, Jose Madrid wrote: > I have a 3560 and when do I "show platform tcam utilization" it says that I > have 1365 directly connected routes. This is definitely not the case and > when I do a "show ip route connected" there are various IP blocks shown, but > none longer than a /26 and maybe a total of 30 routes. Anyone know how > these numbers are computed? > > #sh platform tcam utilization > > CAM Utilization for ASIC# 0 Max Used > Masks/Values Masks/values > IPv4 unicast directly-connected routes: 2048/2048 1365/1365 > IPv4 unicast indirectly-connected routes: 1024/1024 190/190 >
I believe direct-connected routes also includes IP->ARP entries in TCAM. -- Brandon Ewing ([email protected])
pgpgHGKzkCeDW.pgp
Description: PGP signature
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
