On 21/01/2011, at 5:07 AM, Jose Madrid wrote: > I have a 3560 and when do I "show platform tcam utilization" it says that I > have 1365 directly connected routes. This is definitely not the case and > when I do a "show ip route connected" there are various IP blocks shown, but > none longer than a /26 and maybe a total of 30 routes. Anyone know how > these numbers are computed?
so this switch has SVI(s) configured? each 'host' in a subnet will consume a /32 prefix in the FIB for glueing L3->L2. its how every "L3 switch" must work. cheers, lincoln. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
