there's also teh Maretron N2K version.  But I'm thinking I don't want to have 
to the instruments on just to see power/battery status.   

----- Original Message -----
From: "Dennis C." <[email protected]> 
To: [email protected] 
Sent: Monday, December 3, 2012 11:14:57 PM 
Subject: Re: Stus-List xantrex link 20 



I don't like straying from the accepted marine solutions but there are more 
battery monitors out there than the Link and Blue Sea systems.  There's the 
Trimetric 2025-RV and the Doc Wattson R102.  Don't know anything about either.  
Readouts may be in KWH and not AH. 


Dennis C. 
Touche' 35-1 #83 
Mandevile, LA 








From: "[email protected]" <[email protected]> 
To: [email protected] 
Sent: Monday, December 3, 2012 10:28 PM 
Subject: Re: Stus-List xantrex link 20 





Yea, it's a good idea, but going with a dedicated starting battery isn't in my 
immediate future.  
  
So, with those of us going old school with 1-all-2 battery switch, one monitor 
could work to check voltage/amp on each battery by having the current sensor 
down stream of the switch.   Any downside to that?  




From: "Frederick G Street" <[email protected]> 
To: [email protected] 
Sent: Monday, December 3, 2012 9:12:20 PM 
Subject: Re: Stus-List xantrex link 20 

Colin's right (as usual…   :^).  Also, if you go that route, some of he newer 
battery monitors will allow you measure just the voltage of the starting 
battery (in addition to all the functions for the house bank), which is all you 
really need for the start battery, as it rarely gets discharged much.  You 
don't really need to know how many amp-hours are in it… and it's better to NOT 
have a shunt on the start battery in any case. 



Fred Street -- Minneapolis 
S/V  Oceanis  (1979 C&C Landfall 38) -- on the hard in Bayfield, WI   :^( 


On Dec 3, 2012, at 8:23 PM, Colin Kilgour < [email protected] > wrote: 

<blockquote>
If you move to dedicated house and starting "banks" which I would 
highly recommend, a Link that only measures one bank will do just fine 
- because if you have no draw on your starting battery other than 
starting, why bother monitoring? 



_______________________________________________ 
This List is provided by the C&C Photo Album 
http://www.cncphotoalbum.com 
[email protected] 

_______________________________________________ 
This List is provided by the C&C Photo Album 
http://www.cncphotoalbum.com 
[email protected] 



</blockquote>

_______________________________________________ 
This List is provided by the C&C Photo Album 
http://www.cncphotoalbum.com 
[email protected] 
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
[email protected]

Reply via email to