I replaced all the hatches on the boat with Lewmars. Saloon hatch and forward hatch were drop-in replacements, the head hatch took a bit of glass work but works fine.
Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC On Mon, 27 Apr 2020 at 06:15, Paul Fountain via CnC-List < cnc-list@cnc-list.com> wrote: > Our 77 C&C27-3 had an Aitkens&Hoyle hatch, much better than the Bomar > hatches on our 85 33-ll, which have been replaced with Lewmar Ocean series > hatches. The angle of the forward hatch made the low profile hatches > impractical, and the raised Fiberglas either side made them unattractive. > > I’d rate the A&H and Lewmar Ocean series comparable . > > Paul > ------------------------------ > *From:* CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Bill > Coleman via CnC-List <cnc-list@cnc-list.com> > *Sent:* Monday, April 27, 2020 8:33:21 AM > *To:* cnc-list@cnc-list.com <cnc-list@cnc-list.com> > *Cc:* Bill Coleman <colt...@gmail.com> > *Subject:* Re: Stus-List Need to replace forward hatch on 35 mkIII > > > That is a handsome looking hatch. > > How do you compare the overall quality compared to Atkins & Hoyle or > Lewmar? > > > > Bill Coleman > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Graham > Collins via CnC-List > *Sent:* Sunday, April 26, 2020 9:27 PM > *To:* cnc-list@cnc-list.com > *Cc:* Graham Collins > *Subject:* Re: Stus-List Need to replace forward hatch on 35 mkIII > > > > Hi Matthew > > Atkins & Hoyle make the direct replacement, but there is an alternative - > I put on a low profile stainless hatch from these guys. > http://www.manshipmarine.com/low-profile-deck-hatch.html > > <http://www.manshipmarine.com/low-profile-deck-hatch.html> > > I'll look to see if I have any pics. > > Graham Collins > > Secret Plans > > C&C 35-III #11 > > On 2020-04-26 10:12 p.m., Matthew Schlanger via CnC-List wrote: > > Hello CnC list, > > > > I was wondering if anyone knew exactly what kind and where I can find a > replacement for my forward hatch on a 1983 C&C 35 mkIII. > > > > I am hoping I can just get a new hatch and use the existing frame, though I > assume it comes with a new frame as well just in case. > > > > I measured the outer dimensions of the flanges on the frame at 20 7/8” > square, the outer dimensions of the hatch at ~21 13/16 square, and the inner > distance between the hinges on the hatch at 14 1/16”. > > > > I thought this would use a Lewmar replacement but the dimensions don’t seem > to match. > > > > Thanks in advance. > > This list is great, I wish I had more time to read it. > > > > Matthew Schlanger > > The Office > > 1983 C&C 35 mkIII > > Nyack NY > > _______________________________________________ > > > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray > > > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray