We were lucky then all 3 on that all 3 fit perfectly! Actually better than the Bomars we replaced!
Paul ________________________________ From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Jim Watts via CnC-List <cnc-list@cnc-list.com> Sent: Tuesday, April 28, 2020 2:19:54 PM To: 1 CnC List <cnc-list@cnc-list.com> Cc: Jim Watts <paradigmat...@gmail.com> Subject: Re: Stus-List Need to replace forward hatch on 35 mkIII I replaced all the hatches on the boat with Lewmars. Saloon hatch and forward hatch were drop-in replacements, the head hatch took a bit of glass work but works fine. Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC On Mon, 27 Apr 2020 at 06:15, Paul Fountain via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: Our 77 C&C27-3 had an Aitkens&Hoyle hatch, much better than the Bomar hatches on our 85 33-ll, which have been replaced with Lewmar Ocean series hatches. The angle of the forward hatch made the low profile hatches impractical, and the raised Fiberglas either side made them unattractive. I’d rate the A&H and Lewmar Ocean series comparable . Paul ________________________________ From: CnC-List <cnc-list-boun...@cnc-list.com<mailto:cnc-list-boun...@cnc-list.com>> on behalf of Bill Coleman via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> Sent: Monday, April 27, 2020 8:33:21 AM To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> Cc: Bill Coleman <colt...@gmail.com<mailto:colt...@gmail.com>> Subject: Re: Stus-List Need to replace forward hatch on 35 mkIII That is a handsome looking hatch. How do you compare the overall quality compared to Atkins & Hoyle or Lewmar? Bill Coleman From: CnC-List [mailto:cnc-list-boun...@cnc-list.com<mailto:cnc-list-boun...@cnc-list.com>] On Behalf Of Graham Collins via CnC-List Sent: Sunday, April 26, 2020 9:27 PM To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Cc: Graham Collins Subject: Re: Stus-List Need to replace forward hatch on 35 mkIII Hi Matthew Atkins & Hoyle make the direct replacement, but there is an alternative - I put on a low profile stainless hatch from these guys. http://www.manshipmarine.com/low-profile-deck-hatch.html <http://www.manshipmarine.com/low-profile-deck-hatch.html> I'll look to see if I have any pics. Graham Collins Secret Plans C&C 35-III #11 On 2020-04-26 10:12 p.m., Matthew Schlanger via CnC-List wrote: Hello CnC list, I was wondering if anyone knew exactly what kind and where I can find a replacement for my forward hatch on a 1983 C&C 35 mkIII. I am hoping I can just get a new hatch and use the existing frame, though I assume it comes with a new frame as well just in case. I measured the outer dimensions of the flanges on the frame at 20 7/8” square, the outer dimensions of the hatch at ~21 13/16 square, and the inner distance between the hinges on the hatch at 14 1/16”. I thought this would use a Lewmar replacement but the dimensions don’t seem to match. Thanks in advance. This list is great, I wish I had more time to read it. Matthew Schlanger The Office 1983 C&C 35 mkIII Nyack NY _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
