Kalyani, Thanks so much.
Lyle On Tue, Mar 20, 2018 at 11:14 AM, Bogineni, Kalyani < kalyani.bogin...@verizonwireless.com> wrote: > Lyle: > > > > Thank you for your comments. The document is still work-in-progress. The > future revisions will address your comments. > > > > > > *From:* dmm [mailto:dmm-boun...@ietf.org] *On Behalf Of *Lyle Bertz > *Sent:* Tuesday, March 20, 2018 6:57 AM > *To:* dmm <dmm@ietf.org> > *Subject:* [E] Re: [DMM] draft-bogineni-dmm-optimized-mobile-user-plane-00 > > > > We'll be quite time constrained during this session so I thought I would > ask a couple of simple questions which I hope have already been addressed > in previous e-mails: > > > > 1. Figures 14 & 15 are described as options and do not include an > SMF. However, Figures 16 & 17 do. It is a bit confusing. Are 14 & 15 > incorrect or is an option to skip the SMF? If correct, how does one do any > policy in those figures? > > [KB] Slide #12 in the presentation show the complete diagrams, the > document needs to be updated. > > https://datatracker.ietf.org/meeting/101/materials/slides- > 101-dmm-optimized-mobile-user-plane-solutions-for-5g-00 > > > > > > 2. ILA appears to be super NAT'g (more than 1 NAT) but it is unclear > how policy works. I am not sure that in its current state the proposed ILA > design addresses in Section 3. Although it is noted that not all functions > are supported at a specific UPF it is unclear that policy, lawful > intercept, etc.. is supported at all. Will this be section be updated? > > [KB] the sections will be updated to show how each solution meets the > requirements in Section 3. > > > > 3. Will a feature support comparison be made for each solution with > the UPF functions to ensure coverage? > > [KB] That is the plan. > > > > 4. Will MFA be proposed as an option > draft-gundavelli-dmm-mfa-00 [KB] I will let Sri answer this. > > )? > > > > Thanks! > > > Lyle > > > > > > > > > > > > >
_______________________________________________ dmm mailing list dmm@ietf.org https://www.ietf.org/mailman/listinfo/dmm
