Jim,
Thank you. This might be my issue. Here are the settings in my ini file:
CATdriver=/dev/rig
CATport=/dev/ttyUSB0
CATportIndex=9
How were you able to determine your actual USBSERIAL name and location?
73, Bob
Bob Nobis - N7RJN
Goodyear, AZ
[email protected]
On Jan 29, 2014, at 10:39 AM, Jim Bennett <[email protected]> wrote:
> Bob - have you modified the WSJT-X.ini file to point it to your SLUSB stuff?
> I had the same issue trying to get my iMac (and my MacBook Air) to properly
> do rig control. Here is what I had to do in my situation - your USBSERIAL
> name and location may be different:
>
> CATdriver=/dev/cu.usbserial-A501XNHZ
> CATport=/dev/cu.usbserial-A501XNHZ
>
> Jim / W6JHB
>
>
> On Wednesday, Jan 29, 2014, at Wednesday, 9:06 AM, Robert Nobis wrote:
>
>> I am trying to setup WSJT-X for JT65 operation on my K3 and Mac but can't
>> seem to get the program to work. My audio card is a SignaLink USB.
>>
>> When I try to configure WSJT-X to interface to my K3, I always get the
>> message "Open Rig Failed".
>>
>> Does anyone have any suggestions on the proper setup of the K3 as well as
>> WSJT-X?
>>
>> Here is my K3 setup:
>>
>> K3 CONFIG settings:
>> AF GAIN HI
>> AF LIM nor 030
>> LIN OUT nor 075
>> PTT--KEY OFF-OFF
>> RS232 38400 b
>> SPKRS 2
>> SPKR+PH NO
>>
>> K3 MENU Settings:
>> MIC SEL Line In
>> MIC+LIN Not APPL (I can't change this)
>>
>> Controls:
>> CMP 0
>> MIC MIC LINE 20
>> SQUELCH 0
>> RF GAIN 50%
>> MODE USB
>> NB OFF
>> NR OFF
>> NTCH OFF
>> VOX OFF
>> AGC AGC-F
>> ALT OFF
>> PWR 50 Watts
>>
>> On the SignaLink USB I have the Tx and Rx gain set for 50% and DLY set to 0.
>>
>> Thanks and 73,
>>
>> Bob -
>>
>> Bob Nobis - N7RJN
>> Goodyear, AZ
>> [email protected]
>>
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[email protected]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
